[PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board

Luka Kovacic luka.kovacic at sartura.hr
Thu Jul 23 10:56:37 CEST 2020


MikroTik CRS326-24G-2S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.

This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit board variant has a
bigger Macronix flash.

Add basic U-Boot, UART and SPI flash support.

Signed-off-by: Luka Kovacic <luka.kovacic at sartura.hr>
Cc: Luka Perkov <luka.perkov at sartura.hr>
Cc: Jakov Petrina <jakov.petrina at sartura.hr>
---
 arch/arm/dts/Makefile                         |   2 +
 arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts  |  43 +++++++
 .../dts/armada-xp-crs326-24g-2s-u-boot.dtsi   |  13 +++
 arch/arm/dts/armada-xp-crs326-24g-2s.dts      |  17 +++
 arch/arm/dts/armada-xp-crs326-24g-2s.dtsi     | 110 ++++++++++++++++++
 board/mikrotik/crs3xx-98dx3236/MAINTAINERS    |   9 ++
 configs/crs326-24g-2s-bit_defconfig           |  54 +++++++++
 configs/crs326-24g-2s_defconfig               |  54 +++++++++
 8 files changed, 302 insertions(+)
 create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
 create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
 create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s.dts
 create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
 create mode 100644 configs/crs326-24g-2s-bit_defconfig
 create mode 100644 configs/crs326-24g-2s_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 72e1f4fa20..9f8ca61f28 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -214,6 +214,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-8040-mcbin.dtb			\
 	armada-xp-crs305-1g-4s.dtb		\
 	armada-xp-crs305-1g-4s-bit.dtb		\
+	armada-xp-crs326-24g-2s.dtb		\
+	armada-xp-crs326-24g-2s-bit.dtb		\
 	armada-xp-db-xc3-24g4xg.dtb		\
 	armada-xp-gp.dtb			\
 	armada-xp-maxbcm.dtb			\
diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
new file mode 100644
index 0000000000..b340eedf71
--- /dev/null
+++ b/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic at sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition at u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition at u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition at ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition at ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi b/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
new file mode 100644
index 0000000000..8576a02730
--- /dev/null
+++ b/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash at 0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/dts/armada-xp-crs326-24g-2s.dts
new file mode 100644
index 0000000000..83aef43f66
--- /dev/null
+++ b/arch/arm/dts/armada-xp-crs326-24g-2s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic at sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
new file mode 100644
index 0000000000..e50f3ead13
--- /dev/null
+++ b/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS326-24G-2S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+#include "armada-xp-crs326-24g-2s-u-boot.dtsi"
+
+/ {
+	model = "CRS326-24G-2S+";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition at u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition at u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition at ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/board/mikrotik/crs3xx-98dx3236/MAINTAINERS b/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
index d02584bb1d..7f01f4318e 100644
--- a/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
+++ b/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
@@ -12,3 +12,12 @@ F:	configs/crs305-1g-4s_defconfig
 F:	configs/crs305-1g-4s-bit_defconfig
 F:	arch/arm/dts/armada-xp-crs305-1g-4s.dts
 F:	arch/arm/dts/armada-xp-crs305-1g-4s-bit.dts
+
+CRS326-24G-2S BOARD
+M:	Luka Kovacic <luka.kovacic at sartura.hr>
+M:	Luka Perkov <luka.perkov at sartura.hr>
+S:	Maintained
+F:	configs/crs326-24g-2s_defconfig
+F:	configs/crs326-24g-2s-bit_defconfig
+F:	arch/arm/dts/armada-xp-crs326-24g-2s.dts
+F:	arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
diff --git a/configs/crs326-24g-2s-bit_defconfig b/configs/crs326-24g-2s-bit_defconfig
new file mode 100644
index 0000000000..18f2d34453
--- /dev/null
+++ b/configs/crs326-24g-2s-bit_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_CRS3XX_98DX3236=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x1F0000
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+# CONFIG_EFI_LOADER is not set
+CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
+CONFIG_AUTOBOOT_STOP_STR="s"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_I2C is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s-bit"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_BLK=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+# CONFIG_DM_I2C is not set
+# CONFIG_SYS_I2C_MVTWSI is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FIT=y
+CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/crs326-24g-2s_defconfig b/configs/crs326-24g-2s_defconfig
new file mode 100644
index 0000000000..fec7922f4c
--- /dev/null
+++ b/configs/crs326-24g-2s_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_CRS3XX_98DX3236=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x1F0000
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+# CONFIG_EFI_LOADER is not set
+CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
+CONFIG_AUTOBOOT_STOP_STR="s"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_I2C is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_BLK=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+# CONFIG_DM_I2C is not set
+# CONFIG_SYS_I2C_MVTWSI is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FIT=y
+CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
-- 
2.26.2



More information about the U-Boot mailing list