[PATCH v4 16/27] mediatek: Makefile: Drop explicit targets built by binman

[Simon Glass]

On mediatek various files that need to be created by binman. It does not
make sense to enumerate these in the Makefile. They are described in the
configuration (devicetree) for each board and we can simply run binman
(always) to generate them.

This avoid sprinkling the Makefile with arch-specific code.

Also update the binman definition so that idbloader.img is only needed
when SPL is actually being used.

Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v3)

Changes in v3:
- Move in the rockchip changes mistakenly in the earlier x86 patch

 Makefile                          | 24 ++++++++++++++++--------
 arch/arm/dts/rockchip-u-boot.dtsi |  2 ++
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/Makefile b/Makefile
index f72e627fbe..e4b1c01de1 100644
--- a/Makefile
+++ b/Makefile
@@ -926,7 +926,10 @@ ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64)$(CONFIG_SPL),yyy)
 INPUTS-y += u-boot-sunxi-with-spl.bin
 endif
 
+# Generate this input file for binman
+ifeq ($(CONFIG_SPL),)
 INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
+endif
 
 # Add optional build target if defined in board/cpu/soc headers
 ifneq ($(CONFIG_BUILD_TARGET),)
@@ -941,9 +944,20 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
 INPUTS-y += u-boot-with-dtb.bin
 endif
 
-ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+# On ARM64 this target is produced by binman so we don't need this dep
+ifeq ($(CONFIG_ARM64),y)
+ifeq ($(CONFIG_SPL),y)
+# TODO: Get binman to generate this too
 INPUTS-y += u-boot-rockchip.bin
 endif
+else
+ifeq ($(CONFIG_SPL),y)
+# Generate these inputs for binman which will create the output files
+INPUTS-y += idbloader.img u-boot.img
+endif
+endif
+endif
 
 INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
 	$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
@@ -1459,10 +1473,7 @@ idbloader.img: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif
 
-ifeq ($(CONFIG_ARM64),)
-u-boot-rockchip.bin: idbloader.img u-boot.img FORCE
-	$(call if_changed,binman)
-else
+ifeq ($(CONFIG_ARM64),y)
 OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
 	--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
 u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
@@ -1689,9 +1700,6 @@ u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
 
 ifeq ($(CONFIG_SPL),y)
 spl/u-boot-spl-mtk.bin: spl/u-boot-spl
-
-u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
-	$(call if_changed,binman)
 else
 MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
 	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index 0451db735e..eae3ee715d 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -11,6 +11,7 @@
 	};
 };
 
+#ifdef CONFIG_SPL
 &binman {
 	simple-bin {
 		filename = "u-boot-rockchip.bin";
@@ -25,3 +26,4 @@
 		};
 	};
 };
+#endif
-- 
2.28.0.rc0.105.gf9edc3c819-goog