[PATCH 2/3] boards: amlogic: add Odroid C4 support
Anand Moon
linux.amoon at gmail.com
Thu Jul 2 05:09:05 CEST 2020
Hi Neil,
On Wed, 1 Jul 2020 at 20:13, Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt at gmail.com>
>
> Odroid C4 is an Amlogic SM1 device, the board config and board documentation
> are adapted from the Odroid-N2 support from the same vendor.
>
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
Please add my
Tested-by: Anand Moon <linux.amoon at gmail.com>
> arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi | 7 +
> board/amlogic/odroid-n2/MAINTAINERS | 2 +
> configs/odroid-c4_defconfig | 62 +++++++++
> doc/board/amlogic/index.rst | 3 +-
> doc/board/amlogic/odroid-c4.rst | 133 +++++++++++++++++++
> 5 files changed, 206 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi
> create mode 100644 configs/odroid-c4_defconfig
> create mode 100644 doc/board/amlogic/odroid-c4.rst
>
> diff --git a/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi
> new file mode 100644
> index 0000000000..ee32c6f43d
> --- /dev/null
> +++ b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + */
> +
> +#include "meson-g12-common-u-boot.dtsi"
> diff --git a/board/amlogic/odroid-n2/MAINTAINERS b/board/amlogic/odroid-n2/MAINTAINERS
> index 5627e54058..77f7746346 100644
> --- a/board/amlogic/odroid-n2/MAINTAINERS
> +++ b/board/amlogic/odroid-n2/MAINTAINERS
> @@ -4,4 +4,6 @@ S: Maintained
> L: u-boot-amlogic at groups.io
> F: board/amlogic/odroid-n2/
> F: configs/odroid-n2_defconfig
> +F: configs/odroid-c4_defconfig
> F: doc/board/amlogic/odroid-n2.rst
> +F: doc/board/amlogic/odroid-c4.rst
> diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig
> new file mode 100644
> index 0000000000..db9271916e
> --- /dev/null
> +++ b/configs/odroid-c4_defconfig
> @@ -0,0 +1,62 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_BOARD="odroid-n2"
> +CONFIG_ARCH_MESON=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_DM_GPIO=y
> +CONFIG_MESON_G12A=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xff803000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" odroid-c4"
> +CONFIG_DEBUG_UART=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-c4"
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_MESON_G12A_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_G12A=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_MESON_EE_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_MESON=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_DWC3=y
> +# CONFIG_USB_DWC3_GADGET is not set
> +CONFIG_USB_DWC3_MESON_G12A=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_MESON=y
> +CONFIG_VIDEO_DT_SIMPLEFB=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
> index 3730419167..0e2f8c9aad 100644
> --- a/doc/board/amlogic/index.rst
> +++ b/doc/board/amlogic/index.rst
> @@ -17,7 +17,7 @@ This matrix concerns the actual source code version.
> +===============================+===========+==============+==============+============+============+=============+==============+
> | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
> | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
> -| | P200 | LibreTech-CC | | | | | |
> +| | P200 | LibreTech-CC | | | | | Odroid-C4 |
> | | P201 | LibreTech-AC | | | | | |
> +-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+
> | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> @@ -83,6 +83,7 @@ Board Documentation
> libretech-cc
> nanopi-k2
> odroid-c2
> + odroid-c4
> odroid-n2
> p200
> p201
> diff --git a/doc/board/amlogic/odroid-c4.rst b/doc/board/amlogic/odroid-c4.rst
> new file mode 100644
> index 0000000000..4327d1913f
> --- /dev/null
> +++ b/doc/board/amlogic/odroid-c4.rst
> @@ -0,0 +1,133 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +U-Boot for ODROID-C4
> +====================
> +
> +ODROID-N2 is a single board computer manufactured by Hardkernel
> +Co. Ltd with the following specifications:
> +
> + - Amlogic S905X3 Arm Cortex-A55 quad-core SoC
> + - 2GB or 4GB LPDDR4 SDRAM
> + - Gigabit Ethernet
> + - HDMI 2.1 display
> + - 40-pin GPIO header
> + - 7-pin GPIO expansion header
> + - 4x USB 3.0 Host
> + - 1x USB 2.0 Host/OTG (micro)
> + - eMMC, microSD
> + - UART serial
> + - Infrared receiver
> +
> +Schematics are available on the manufacturer website.
> +
> +U-Boot compilation
> +------------------
> +
> + $ export CROSS_COMPILE=aarch64-none-elf-
> + $ make odroid-c4_defconfig
> + $ make
> +
> +Image creation
> +--------------
> +
> +Amlogic doesn't provide sources for the firmware and for tools needed
> +to create the bootloader image, so it is necessary to obtain them from
> +the git tree published by the board vendor:
> +
> +.. code-block:: bash
> +
> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
> +
> + $ DIR=odroid-c4
> + $ git clone --depth 1 \
> + https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 \
> + $DIR
> +
> + $ cd odroid-c4
> + $ make odroidc4_defconfig
> + $ make
> + $ export UBOOTDIR=$PWD
> +
> + Go back to mainline U-Boot source tree then :
> +
> +.. code-block:: bash
> +
> + $ mkdir fip
> +
> + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
> + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/
> + $ cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/
> + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/
> + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/
> + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/
> + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/
> + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
> + $ cp u-boot.bin fip/bl33.bin
> +
> + $ sh fip/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + $ sh fip/blx_fix.sh \
> + fip/bl2.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/acs.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
> + --output fip/bl30_new.bin.g12a.enc \
> + --level v3
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
> + --output fip/bl30_new.bin.enc \
> + --level v3 --type bl30
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
> + --output fip/bl31.img.enc \
> + --level v3 --type bl31
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
> + --output fip/bl33.bin.enc \
> + --level v3 --type bl33 --compress lz4
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
> + --output fip/bl2.n.bin.sig
> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc \
> + --ddrfw1 fip/ddr4_1d.fw \
> + --ddrfw2 fip/ddr4_2d.fw \
> + --ddrfw3 fip/ddr3_1d.fw \
> + --ddrfw4 fip/piei.fw \
> + --ddrfw5 fip/lpddr4_1d.fw \
> + --ddrfw6 fip/lpddr4_2d.fw \
> + --ddrfw7 fip/diag_lpddr4.fw \
> + --ddrfw8 fip/aml_ddr.fw \
> + --ddrfw9 fip/lpddr3_1d.fw \
> + --level v3
> +
> +and then write the image to SD with:
> +
> +.. code-block:: bash
> +
> + $ DEV=/dev/your_sd_device
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
> --
> 2.22.0
>
More information about the U-Boot
mailing list