[PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH
Vladimir Oltean
olteanv at gmail.com
Wed Jul 1 19:45:47 CEST 2020
On Wed, 1 Jul 2020 at 20:11, Vladimir Oltean <olteanv at gmail.com> wrote:
>
> Hi Zhiqiang,
>
> On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou <Zhiqiang.Hou at nxp.com> wrote:
> >
> > From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> >
> > This patch set depends on:
> > https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olteanv@gmail.com/
> >
> > Hou Zhiqiang (16):
> > net: fsl_mdio: Change to use virtual address
> > net: fsl_mdio: Correct the MII management register block address
> > net: tsec: convert to use DM_MDIO when DM_ETH enabled
> > net: tsec: Add fixed-link PHY support
> > net: tsec: Add the compatible string "gianfar" support
> > powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled
> > fsl: p1_p2_rdb: Move vsc7835 firmware uploading to
> > board_early_init_r()
> > configs: p1_p2_rdb: Add the default address of vsc7385 firmware
> > dts: powerpc: p1020rdb: Add eTSEC DT nodes
> > powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled
> > configs: P1020RDB: Enable DM_ETH config
> > dts: powerpc: p1010rdb: Add eTSEC DT nodes
> > powerpc: p1010rdb: Compile legacy ethernet init function when no
> > DM_ETH
> > configs: P1010RDB: Enable DM_ETH config
> > dts: powerpc: p2020rdb: Add eTSEC DT nodes
> > configs: P2020RDB: Enable DM_ETH config
> >
> > arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +
> > arch/powerpc/dts/p1010rdb-pa.dts | 1 +
> > arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 +
> > arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++
> > arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++
> > arch/powerpc/dts/p1020-post.dtsi | 20 +++++-
> > arch/powerpc/dts/p1020rdb-pc.dts | 1 +
> > arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++
> > arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 +
> > arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++
> > arch/powerpc/dts/p2020-post.dtsi | 10 ++-
> > arch/powerpc/dts/p2020rdb-pc.dts | 1 +
> > arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++
> > arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 +
> > arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++
> > arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++
> > arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++
> > arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++
> > arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++
> > arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++
> > arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++
> > arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++
> > arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++
> > arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++
> > board/freescale/p1010rdb/p1010rdb.c | 2 +
> > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++-----
> > configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 +
> > configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 +
> > configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 +
> > configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 +
> > configs/P1010RDB-PA_NAND_defconfig | 2 +
> > configs/P1010RDB-PA_NOR_defconfig | 2 +
> > configs/P1010RDB-PA_SDCARD_defconfig | 2 +
> > configs/P1010RDB-PA_SPIFLASH_defconfig | 2 +
> > configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 +
> > configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 +
> > configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 +
> > configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 +
> > configs/P1010RDB-PB_NAND_defconfig | 2 +
> > configs/P1010RDB-PB_NOR_defconfig | 2 +
> > configs/P1010RDB-PB_SDCARD_defconfig | 2 +
> > configs/P1010RDB-PB_SPIFLASH_defconfig | 2 +
> > configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 +
> > configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 +
> > configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 +
> > configs/P1020RDB-PC_36BIT_defconfig | 3 +
> > configs/P1020RDB-PC_NAND_defconfig | 3 +
> > configs/P1020RDB-PC_SDCARD_defconfig | 3 +
> > configs/P1020RDB-PC_SPIFLASH_defconfig | 3 +
> > configs/P1020RDB-PC_defconfig | 3 +
> > configs/P1020RDB-PD_NAND_defconfig | 3 +
> > configs/P1020RDB-PD_SDCARD_defconfig | 3 +
> > configs/P1020RDB-PD_SPIFLASH_defconfig | 3 +
> > configs/P1020RDB-PD_defconfig | 3 +
> > configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 +
> > configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 +
> > configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 +
> > configs/P2020RDB-PC_36BIT_defconfig | 3 +
> > configs/P2020RDB-PC_NAND_defconfig | 3 +
> > configs/P2020RDB-PC_SDCARD_defconfig | 3 +
> > configs/P2020RDB-PC_SPIFLASH_defconfig | 3 +
> > configs/P2020RDB-PC_defconfig | 3 +
> > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +-
> > drivers/net/fsl_mdio.c | 28 +++++++--
> > drivers/net/tsec.c | 62 ++++++++-----------
> > include/configs/p1_p2_rdb_pc.h | 2 +
> > include/fsl_mdio.h | 4 ++
> > include/tsec.h | 4 ++
> > 68 files changed, 698 insertions(+), 63 deletions(-)
> > create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi
> > create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi
> > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi
> >
> > --
> > 2.25.1
> >
>
> The point with the Acked-by/Reviewed-by/Tested-by tags is that you
> copy them to your next patch submissions, such that the maintainers
> see which patches have had eyes on them already, so that they don't
> need to look through them again.
>
> Thanks,
> -Vladimir
I'm sorry, please ignore this. I thought none of the patches have the
Reviewed-by tag I added, but looks like those are in fact all the
patches that I did review. Time to review the rest!
Thanks,
-Vladimir
More information about the U-Boot
mailing list