[PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH
Vladimir Oltean
olteanv at gmail.com
Wed Jul 1 19:11:58 CEST 2020
Hi Zhiqiang,
On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou <Zhiqiang.Hou at nxp.com> wrote:
>
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
>
> This patch set depends on:
> https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olteanv@gmail.com/
>
> Hou Zhiqiang (16):
> net: fsl_mdio: Change to use virtual address
> net: fsl_mdio: Correct the MII management register block address
> net: tsec: convert to use DM_MDIO when DM_ETH enabled
> net: tsec: Add fixed-link PHY support
> net: tsec: Add the compatible string "gianfar" support
> powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled
> fsl: p1_p2_rdb: Move vsc7835 firmware uploading to
> board_early_init_r()
> configs: p1_p2_rdb: Add the default address of vsc7385 firmware
> dts: powerpc: p1020rdb: Add eTSEC DT nodes
> powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled
> configs: P1020RDB: Enable DM_ETH config
> dts: powerpc: p1010rdb: Add eTSEC DT nodes
> powerpc: p1010rdb: Compile legacy ethernet init function when no
> DM_ETH
> configs: P1010RDB: Enable DM_ETH config
> dts: powerpc: p2020rdb: Add eTSEC DT nodes
> configs: P2020RDB: Enable DM_ETH config
>
> arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +
> arch/powerpc/dts/p1010rdb-pa.dts | 1 +
> arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 +
> arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++
> arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++
> arch/powerpc/dts/p1020-post.dtsi | 20 +++++-
> arch/powerpc/dts/p1020rdb-pc.dts | 1 +
> arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++
> arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 +
> arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++
> arch/powerpc/dts/p2020-post.dtsi | 10 ++-
> arch/powerpc/dts/p2020rdb-pc.dts | 1 +
> arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++
> arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 +
> arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++
> arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++
> arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++
> arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++
> arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++
> arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++
> arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++
> arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++
> arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++
> arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++
> board/freescale/p1010rdb/p1010rdb.c | 2 +
> board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++-----
> configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 +
> configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 +
> configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 +
> configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 +
> configs/P1010RDB-PA_NAND_defconfig | 2 +
> configs/P1010RDB-PA_NOR_defconfig | 2 +
> configs/P1010RDB-PA_SDCARD_defconfig | 2 +
> configs/P1010RDB-PA_SPIFLASH_defconfig | 2 +
> configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 +
> configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 +
> configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 +
> configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 +
> configs/P1010RDB-PB_NAND_defconfig | 2 +
> configs/P1010RDB-PB_NOR_defconfig | 2 +
> configs/P1010RDB-PB_SDCARD_defconfig | 2 +
> configs/P1010RDB-PB_SPIFLASH_defconfig | 2 +
> configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 +
> configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 +
> configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 +
> configs/P1020RDB-PC_36BIT_defconfig | 3 +
> configs/P1020RDB-PC_NAND_defconfig | 3 +
> configs/P1020RDB-PC_SDCARD_defconfig | 3 +
> configs/P1020RDB-PC_SPIFLASH_defconfig | 3 +
> configs/P1020RDB-PC_defconfig | 3 +
> configs/P1020RDB-PD_NAND_defconfig | 3 +
> configs/P1020RDB-PD_SDCARD_defconfig | 3 +
> configs/P1020RDB-PD_SPIFLASH_defconfig | 3 +
> configs/P1020RDB-PD_defconfig | 3 +
> configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 +
> configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 +
> configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 +
> configs/P2020RDB-PC_36BIT_defconfig | 3 +
> configs/P2020RDB-PC_NAND_defconfig | 3 +
> configs/P2020RDB-PC_SDCARD_defconfig | 3 +
> configs/P2020RDB-PC_SPIFLASH_defconfig | 3 +
> configs/P2020RDB-PC_defconfig | 3 +
> doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +-
> drivers/net/fsl_mdio.c | 28 +++++++--
> drivers/net/tsec.c | 62 ++++++++-----------
> include/configs/p1_p2_rdb_pc.h | 2 +
> include/fsl_mdio.h | 4 ++
> include/tsec.h | 4 ++
> 68 files changed, 698 insertions(+), 63 deletions(-)
> create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi
> create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi
> create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi
>
> --
> 2.25.1
>
The point with the Acked-by/Reviewed-by/Tested-by tags is that you
copy them to your next patch submissions, such that the maintainers
see which patches have had eyes on them already, so that they don't
need to look through them again.
Thanks,
-Vladimir
More information about the U-Boot
mailing list