[PATCH v2 0/2] Add support for PWM SiFive

[Yash Shah]

Any comments or update on this series?

- Yash

> -----Original Message-----
> From: Yash Shah <yash.shah at sifive.com>
> Sent: 23 April 2020 16:58
> To: martyn.welch at collabora.co.uk; hs at denx.de; u-boot at lists.denx.de;
> Sachin Ghadi <sachin.ghadi at sifive.com>
> Cc: Yash Shah <yash.shah at sifive.com>
> Subject: [PATCH v2 0/2] Add support for PWM SiFive
> 
> The patch series adds support for PWM controller in SiFive SoCs
> 
> Changes in v2:
> - Introduce a new patch to add the DT documentation
> - Change commit message to include reference of Linux ver and commit
> - Remove unnecessary function "pwm_sifive_set_invert"
> - Use "dev_read_addr_ptr" instead of "dev_read_addr" to avoid cast on
>   each readl/writel call
> 
> Yash Shah (2):
>   pwm: Add DT documentation for SiFive PWM Controller
>   pwm: Add PWM driver for SiFive SoC
> 
>  doc/device-tree-bindings/pwm/pwm-sifive.txt |  31 +++++
>  drivers/pwm/Kconfig                         |   6 +
>  drivers/pwm/Makefile                        |   1 +
>  drivers/pwm/pwm-sifive.c                    | 172
> ++++++++++++++++++++++++++++
>  4 files changed, 210 insertions(+)
>  create mode 100644 doc/device-tree-bindings/pwm/pwm-sifive.txt
>  create mode 100644 drivers/pwm/pwm-sifive.c
> 
> --
> 2.7.4