[PATCH v5 1/5] roc-rk3399-pc: Move leds setup in SPL

Jagan Teki jagan at amarulasolutions.com
Tue Jul 14 11:32:25 CEST 2020


roc-rk3399-pc has some specific requirements to support LEDS,
environment. board detection and etc prior to U-Boot proper.

So as of now SPL would be a better stage for these custom board
requirements to support unlike TPL. Adding few of these custom
requirements like LEDS in TPL would require extra code pulling
and also the size of TPL can grow.

So, this patch moves the leds code from TPL into SPL after relocation.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v5
- drop tpl.c file
- update the code in board file

 arch/arm/mach-rockchip/tpl.c                |  7 ----
 board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 36 +++++++++++----------
 configs/roc-pc-mezzanine-rk3399_defconfig   |  2 +-
 configs/roc-pc-rk3399_defconfig             |  2 +-
 4 files changed, 21 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c
index 88f80b05a9..cc908e1b0e 100644
--- a/arch/arm/mach-rockchip/tpl.c
+++ b/arch/arm/mach-rockchip/tpl.c
@@ -43,18 +43,11 @@ __weak void rockchip_stimer_init(void)
 	       TIMER_CONTROL_REG);
 }
 
-__weak int board_early_init_f(void)
-{
-	return 0;
-}
-
 void board_init_f(ulong dummy)
 {
 	struct udevice *dev;
 	int ret;
 
-	board_early_init_f();
-
 #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
 	/*
 	 * Debug UART can be used from here if required:
diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
index 7c3a803654..4db3dd739c 100644
--- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
+++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
@@ -6,14 +6,24 @@
 #include <common.h>
 #include <dm.h>
 #include <log.h>
-#include <asm/arch-rockchip/periph.h>
-#include <power/regulator.h>
 #include <spl_gpio.h>
-#include <asm/io.h>
+#include <power/regulator.h>
+
 #include <asm/arch-rockchip/gpio.h>
 
-#ifndef CONFIG_SPL_BUILD
-int board_early_init_f(void)
+#define GPIO0_BASE		0xff720000
+
+static int led_setup(void)
+{
+	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
+
+	/* Turn on red LED, indicating full power mode */
+	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
+
+	return 0;
+}
+
+static int roc_pc_early_init_f(void)
 {
 	struct udevice *regulator;
 	int ret;
@@ -30,19 +40,11 @@ int board_early_init_f(void)
 out:
 	return 0;
 }
-#endif
-
-#if defined(CONFIG_TPL_BUILD)
-
-#define GPIO0_BASE      0xff720000
 
 int board_early_init_f(void)
 {
-	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
-
-	/* Turn on red LED, indicating full power mode */
-	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
-
-	return 0;
+	if (IS_ENABLED(CONFIG_SPL_BUILD))
+		return led_setup();
+	else
+		return roc_pc_early_init_f();
 }
-#endif
diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
index c87a8568fc..15d511741f 100644
--- a/configs/roc-pc-mezzanine-rk3399_defconfig
+++ b/configs/roc-pc-mezzanine-rk3399_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -21,7 +22,6 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
-CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 601f5c6ae1..2a6d0d22c8 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -21,7 +22,6 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
-CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
-- 
2.25.1



More information about the U-Boot mailing list