[v3, 11/11] configs: lx2160ardb: enable eMMC HS400 mode support

[Yangbo Lu]

Enable eMMC HS400 mode support on LX2160ARDB.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
---
Changes for v2:
	- None.
Changes for v3:
	- None.
---
 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
 configs/lx2160ardb_tfa_defconfig             | 1 +
 configs/lx2160ardb_tfa_stmm_defconfig        | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 12e224f..6c65853 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -40,6 +40,7 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index a5c78d2..a5c60c8 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -46,6 +46,7 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig
index e97c9b0..869d4e2 100644
--- a/configs/lx2160ardb_tfa_stmm_defconfig
+++ b/configs/lx2160ardb_tfa_stmm_defconfig
@@ -48,6 +48,7 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
-- 
2.7.4