[PATCH v2 07/12] rockchip: rock-pi-n10: Enable on board devices

Kever Yang kever.yang at rock-chips.com
Wed Jul 22 14:29:50 CEST 2020


On 2020/7/21 下午11:24, Jagan Teki wrote:
> From: Suniel Mahesh <sunil at amarulasolutions.com>
>
> Enable common on board devices for ROCKPi N10.
>
> - USB 2.0 Host
> - USB 3.0 Host
> - USB 3.0 Gadget
> - HDMI Out
>
> Signed-off-by: Suniel Mahesh <sunil at amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> Changes for v2:
> - squash common device enablement
>
>   configs/rock-pi-n10-rk3399pro_defconfig | 21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
>
> diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig
> index c705ce01ce..895820fbe6 100644
> --- a/configs/rock-pi-n10-rk3399pro_defconfig
> +++ b/configs/rock-pi-n10-rk3399pro_defconfig
> @@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=1
>   CONFIG_DEBUG_UART_BASE=0xFF1A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_DEBUG_UART=y
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +# CONFIG_CONSOLE_MUX is not set
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb"
>   CONFIG_MISC_INIT_R=y
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> @@ -19,6 +21,7 @@ CONFIG_TPL=y
>   CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
>   CONFIG_CMD_TIME=y
>   CONFIG_SPL_OF_CONTROL=y
> @@ -36,11 +39,29 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
>   CONFIG_DM_ETH=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_PMIC_RK8XX=y
>   CONFIG_REGULATOR_PWM=y
>   CONFIG_REGULATOR_RK8XX=y
>   CONFIG_PWM_ROCKCHIP=y
> +CONFIG_DM_RESET=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_ROCKCHIP_USB2_PHY=y
> +CONFIG_USB_KEYBOARD=y
> +# CONFIG_USB_KEYBOARD_FN_KEYS is not set
> +CONFIG_USB_GADGET=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
>   CONFIG_ERRNO_STR=y




More information about the U-Boot mailing list