[PATCH v5 04/14] dtoc: add support to scan drivers

[Simon Glass]

Hi Walter,

On Fri, 3 Jul 2020 at 05:07, Walter Lozano <walter.lozano at collabora.com> wrote:
>
> Currently dtoc scans dtbs to convert them to struct platdata and
> to generate U_BOOT_DEVICE entries. These entries need to be filled
> with the driver name, but at this moment the information used is the
> compatible name present in the dtb. This causes that only nodes with
> a compatible name that matches a driver name generate a working
> entry.
>
> In order to improve this behaviour, this patch adds to dtoc the
> capability of scan drivers source code to generate a list of valid driver
> names and aliases. This allows to generate U_BOOT_DEVICE entries using
> valid driver names and rise a warning in the case a name is not valid.
>
> Signed-off-by: Walter Lozano <walter.lozano at collabora.com>
> ---
>
> (no changes since v1)
>
>  tools/dtoc/dtb_platdata.py            | 91 +++++++++++++++++++++++++--
>  tools/dtoc/dtoc_test_driver_alias.dts | 20 ++++++
>  tools/dtoc/test_dtoc.py               | 33 ++++++++++
>  3 files changed, 140 insertions(+), 4 deletions(-)
>  create mode 100644 tools/dtoc/dtoc_test_driver_alias.dts
>

This seems to do the trick, thanks!

But there is one problem remaining - lots of warning output from the
various tests:

https://pastebin.com/K7GBPiqC

Regards,
Simon