[PATCH v1 3/3] pico-imx6ul: convert ethernet function to DM_ETH

[Fabio Estevam]

On Tue, Jul 28, 2020 at 11:36 PM <wig.cheng at technexion.com> wrote:
>
> From: Wig Cheng <wig.cheng at technexion.com>
>
> - Remove pinmux definition from pico-imx6ul.c
> - Enable NET_RANDOM_ETHADDR for temporary solution, because micrel_ksz8xxx
> driver does not support DM_ETH yet, so cannot read MAC address directly.
>
> Before enable DM_ETH:
>   Net:   FEC [PRIME]
>
> After enable DM_ETH:
>   Net:
>   Warning: using random MAC address - ca:3f:43:8f:67:d4
>   eth1: ethernet at 20b4000
>
> Here is the test commands:
>   => dhcp
>   BOOTP broadcast 1
>   DHCP client bound to address 10.88.88.94 (139 ms)
>   *** ERROR: `serverip' not set
>   Cannot autoload with TFTPGET
>   => ping 8.8.8.8
>   Using ethernet at 20b4000 device
>   host 8.8.8.8 is alive
>
> Signed-off-by: Wig Cheng <wig.cheng at technexion.com>
> ---
>  board/technexion/pico-imx6ul/pico-imx6ul.c | 53 ----------------------
>  configs/pico-imx6ul_defconfig              |  2 +
>  2 files changed, 2 insertions(+), 53 deletions(-)
>
> diff --git a/board/technexion/pico-imx6ul/pico-imx6ul.c b/board/technexion/pico-imx6ul/pico-imx6ul.c
> index 5d6be26faa..126823fce0 100644
> --- a/board/technexion/pico-imx6ul/pico-imx6ul.c
> +++ b/board/technexion/pico-imx6ul/pico-imx6ul.c
> @@ -18,7 +18,6 @@
>  #include <asm/io.h>
>  #include <common.h>
>  #include <miiphy.h>

This one could be also removed.