[PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

[Patrice CHOTARD]

On 7/9/20 9:35 AM, Patrick DELAUNAY wrote:
> Hi Marcin,
>
>> From: Marcin Sloniewski <marcin.sloniewski at gmail.com>
>> Sent: mercredi 8 juillet 2020 19:56
>>
>> This commit adds device tree files supporting SBC from Seeed Studio based on
>> STM32MP157C.
>>
>> This works with generic stm32mp1 config.
>> Right now only booting from SD card is supported.
>>
>> Signed-off-by: Marcin Sloniewski <marcin.sloniewski at gmail.com>
>> ---
>>
>> Changes in v6:
>> - forgot to add changes in v5 ;(
>>
>> Changes in v5:
>> - removed description of PLL1 which is now handled by OPP info
>> - removed cd-gpio for sdmmc1 since it is not yet supported
>>
>> Changes in v4:
>> - removed unnecessary pull up on uart4 rx
>>
>> Changes in v3:
>> - changed name of dts files from odyssey-stm32mp157c...
>>   to stm32mp157c-odyssey...
>> - removed usbotg node config
>> - add new board in dts/Makefile in alphabetical order
>>
>> Changes in v2:
>> - removed `st,adc_usb_pd` from config since that
>>   adc connection is non-existent which caused
>>   warning or hang during boot
>>
>>  arch/arm/dts/Makefile                         |   1 +
>>  .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 125 ++++++
>>  arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
>>  arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
>>  arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
>>  5 files changed, 709 insertions(+)
>>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
>>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
>>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
>>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
>>
> Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>
>
> Thanks
>
> Patrick
Applied to u-boot-stm/master

Thanks

Patrice