[PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

[Patrick DELAUNAY]

Hi Marcin,

> From: Marcin Sloniewski <marcin.sloniewski at gmail.com>
> Sent: mercredi 8 juillet 2020 19:56
> 
> This commit adds device tree files supporting SBC from Seeed Studio based on
> STM32MP157C.
> 
> This works with generic stm32mp1 config.
> Right now only booting from SD card is supported.
> 
> Signed-off-by: Marcin Sloniewski <marcin.sloniewski at gmail.com>
> ---
> 
> Changes in v6:
> - forgot to add changes in v5 ;(
> 
> Changes in v5:
> - removed description of PLL1 which is now handled by OPP info
> - removed cd-gpio for sdmmc1 since it is not yet supported
> 
> Changes in v4:
> - removed unnecessary pull up on uart4 rx
> 
> Changes in v3:
> - changed name of dts files from odyssey-stm32mp157c...
>   to stm32mp157c-odyssey...
> - removed usbotg node config
> - add new board in dts/Makefile in alphabetical order
> 
> Changes in v2:
> - removed `st,adc_usb_pd` from config since that
>   adc connection is non-existent which caused
>   warning or hang during boot
> 
>  arch/arm/dts/Makefile                         |   1 +
>  .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 125 ++++++
>  arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
>  arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
>  arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
>  5 files changed, 709 insertions(+)
>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
>  create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
> 

Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>

Thanks

Patrick