[PATCH 01/17] armv8: Fix SMCC and ARM_PSCI_FW dependencies
Nastya Vicodin
vicooodin at gmail.com
Fri Jul 3 11:57:01 CEST 2020
On Thu, Jul 2, 2020 at 4:14 AM Peng Fan <peng.fan at nxp.com> wrote:
>
> > Subject: [PATCH 01/17] armv8: Fix SMCC and ARM_PSCI_FW dependencies
> >
> > From: Oleksandr Andrushchenko <oleksandr_andrushchenko at epam.com>
> >
> > Currently SMCC selects ARM_PSCI_FW if enabled which is not correct as
> > there are cases that PSCI can function without firmware at all.
> > ARM_PSCI_FW itself is built with driver model approach, so it cannot be
> > enabled if DM is off.
> > Fix this by making PSCI reset functionality depend on ARM_PSCI_FW and
only
> > in case if DM is enabled.
>
> I think this might break others, see drivers/firmware/psci.c
>
> Regards,
> Peng.
Well, the only reason we have this patch *was* the problem with the board
support
if CONFIG_DM is off when we tried to add an early console support w/o
driver model.
But it seems this is not needed at all now, so this patch can be easily
dropped without
causing any harm. I’ll also enable CONFIG_DM from the very start as all the
drivers
we are adding will use it anyway.
But, IMO, CONFIG_ARM_PSCI_FW support is still broken wrt the fact that SMCC
can function without PSCI_FW, but made a strong requirement. Even more, it
requires
DM because of the PSCI driver which detects if we are about to use SMCCC or
HVC.
Regards,
Anastasiia
>
>
> >
> > Signed-off-by: Oleksandr Andrushchenko
> > <oleksandr_andrushchenko at epam.com>
> > Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko at epam.com>
> > Suggested-by: Volodymyr Babchuk <volodymyr_babchuk at epam.com>
> > ---
> > arch/arm/Kconfig | 1 -
> > arch/arm/cpu/armv8/Kconfig | 2 ++
> > 2 files changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index
> > 54d65f8488..e9ad716aaa 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -387,7 +387,6 @@ config SYS_ARCH_TIMER config ARM_SMCCC
> > bool "Support for ARM SMC Calling Convention (SMCCC)"
> > depends on CPU_V7A || ARM64
> > - select ARM_PSCI_FW
> > help
> > Say Y here if you want to enable ARM SMC Calling Convention.
> > This should be enabled if U-Boot needs to communicate with
system
> > diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
> > index 3655990772..c8727f4175 100644
> > --- a/arch/arm/cpu/armv8/Kconfig
> > +++ b/arch/arm/cpu/armv8/Kconfig
> > @@ -103,6 +103,8 @@ config PSCI_RESET
> > bool "Use PSCI for reset and shutdown"
> > default y
> > select ARM_SMCCC if OF_CONTROL
> > + select ARM_PSCI_FW if DM
> > +
> > depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
> > !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
> > !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
> > --
> > 2.17.1
More information about the U-Boot
mailing list