[PATCH] board: stm32mp1: remove board.c

[Patrick Delaunay]

Remove the file board/st/stm32mp1/board.c which is not more
compiled since commit 156732cc8939 ("board: stm32mp1: move the
function board_debug_uart_init in spl.c")

Fixes: 156732cc8939 ("board: stm32mp1: move the function board_debug_uart_init in spl.c")
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
Issue when initial patch [1] was applied:

diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c
deleted file mode 100644

[1] http://patchwork.ozlabs.org/project/uboot/patch/20200525101949.15944-10-patrick.delaunay@st.com/


 board/st/stm32mp1/board.c | 36 ------------------------------------
 1 file changed, 36 deletions(-)
 delete mode 100644 board/st/stm32mp1/board.c

diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c
deleted file mode 100644
index 00c61c2886..0000000000
--- a/board/st/stm32mp1/board.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
-/*
- * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#ifdef CONFIG_DEBUG_UART_BOARD_INIT
-void board_debug_uart_init(void)
-{
-#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)
-
-#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00)
-#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)
-
-	/* UART4 clock enable */
-	setbits_le32(RCC_MP_APB1ENSETR, BIT(16));
-
-#define GPIOG_BASE 0x50008000
-	/* GPIOG clock enable */
-	writel(BIT(6), RCC_MP_AHB4ENSETR);
-	/* GPIO configuration for EVAL board
-	 * => Uart4 TX = G11
-	 */
-	writel(0xffbfffff, GPIOG_BASE + 0x00);
-	writel(0x00006000, GPIOG_BASE + 0x24);
-#else
-
-#error("CONFIG_DEBUG_UART_BASE: not supported value")
-
-#endif
-}
-#endif
-- 
2.17.1