[PATCH v3 1/5] dt-bindings: prci: add indexes for reset signals available in prci

[Pragnesh Patel]

>-----Original Message-----
>From: Sagar Kadam <sagar.kadam at sifive.com>
>Sent: 10 July 2020 14:08
>To: u-boot at lists.denx.de
>Cc: rick at andestech.com; Paul Walmsley ( Sifive)
><paul.walmsley at sifive.com>; palmer at dabbelt.com; anup.patel at wdc.com;
>atish.patra at wdc.com; lukma at denx.de; Pragnesh Patel
><pragnesh.patel at sifive.com>; bin.meng at windriver.com;
>jagan at amarulasolutions.com; sjg at chromium.org; twoerner at gmail.com;
>abrodkin at synopsys.com; Eugeniy.Paltsev at synopsys.com; patrick at blueri.se;
>weijie.gao at mediatek.com; festevam at gmail.com; Sagar Kadam
><sagar.kadam at sifive.com>
>Subject: [PATCH v3 1/5] dt-bindings: prci: add indexes for reset signals
>available in prci
>
>Add bit indexes for reset signals within the PRCI module on FU540-C000 SoC.
>The DDR and ethernet sub-system's have reset signals indicated by these
>reset indexes.
>
>Signed-off-by: Sagar Shrikant Kadam <sagar.kadam at sifive.com>
>---
> include/dt-bindings/reset/sifive-fu540-prci.h | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 include/dt-bindings/reset/sifive-fu540-prci.h
>

Reviewed-by: Pragnesh Patel <pragnesh.patel at sifive.com>