[PATCH 10/11] clk: imx8m: drop clk settings

[peng.fan at nxp.com]

From: Peng Fan <peng.fan at nxp.com>

We use non-dm code to configure the clk settings in order to simplify
dm clk driver in future, so remove the duplicated code from clk driver

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/clk/imx/clk-imx8mm.c | 34 ----------------------------------
 drivers/clk/imx/clk-imx8mn.c | 34 ----------------------------------
 2 files changed, 68 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 85d1757536..d32ff8409a 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -437,40 +437,6 @@ static int imx8mm_clk_probe(struct udevice *dev)
 	       base + 0x40a0, 0));
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-	struct clk *clkp, *clkp1;
-
-	clk_get_by_id(IMX8MM_CLK_WDOG1_ROOT, &clkp);
-	clk_enable(clkp);
-	clk_get_by_id(IMX8MM_CLK_WDOG2_ROOT, &clkp);
-	clk_enable(clkp);
-	clk_get_by_id(IMX8MM_CLK_WDOG3_ROOT, &clkp);
-	clk_enable(clkp);
-
-	/* Configure SYS_PLL3 to 750MHz */
-	clk_get_by_id(IMX8MM_SYS_PLL3, &clkp);
-	clk_set_rate(clkp, 750000000UL);
-	clk_enable(clkp);
-
-	/* Configure ARM to sys_pll2_500m */
-	clk_get_by_id(IMX8MM_CLK_A53_SRC, &clkp);
-	clk_get_by_id(IMX8MM_SYS_PLL2_OUT, &clkp1);
-	clk_enable(clkp1);
-	clk_get_by_id(IMX8MM_SYS_PLL2_500M, &clkp1);
-	clk_set_parent(clkp, clkp1);
-
-	/* Configure ARM PLL to 1.2GHz */
-	clk_get_by_id(IMX8MM_ARM_PLL, &clkp1);
-	clk_set_rate(clkp1, 1200000000UL);
-	clk_get_by_id(IMX8MM_ARM_PLL_OUT, &clkp1);
-	clk_enable(clkp1);
-	clk_set_parent(clkp, clkp1);
-
-	/* Configure DIV to 1.2GHz */
-	clk_get_by_id(IMX8MM_CLK_A53_DIV, &clkp1);
-	clk_set_rate(clkp1, 1200000000UL);
-#endif
-
 	return 0;
 }
 
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 8bf6061a32..e29d902544 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -440,40 +440,6 @@ static int imx8mn_clk_probe(struct udevice *dev)
 	       base + 0x40a0, 0));
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-	struct clk *clkp, *clkp1;
-
-	clk_get_by_id(IMX8MN_CLK_WDOG1_ROOT, &clkp);
-	clk_enable(clkp);
-	clk_get_by_id(IMX8MN_CLK_WDOG2_ROOT, &clkp);
-	clk_enable(clkp);
-	clk_get_by_id(IMX8MN_CLK_WDOG3_ROOT, &clkp);
-	clk_enable(clkp);
-
-	/* Configure SYS_PLL3 to 600MHz */
-	clk_get_by_id(IMX8MN_SYS_PLL3, &clkp);
-	clk_set_rate(clkp, 600000000UL);
-	clk_enable(clkp);
-
-	/* Configure ARM to sys_pll2_500m */
-	clk_get_by_id(IMX8MN_CLK_A53_SRC, &clkp);
-	clk_get_by_id(IMX8MN_SYS_PLL2_OUT, &clkp1);
-	clk_enable(clkp1);
-	clk_get_by_id(IMX8MN_SYS_PLL2_500M, &clkp1);
-	clk_set_parent(clkp, clkp1);
-
-	/* Configure ARM PLL to 1.2GHz */
-	clk_get_by_id(IMX8MN_ARM_PLL, &clkp1);
-	clk_set_rate(clkp1, 1200000000UL);
-	clk_get_by_id(IMX8MN_ARM_PLL_OUT, &clkp1);
-	clk_enable(clkp1);
-	clk_set_parent(clkp, clkp1);
-
-	/* Configure DIV to 1.2GHz */
-	clk_get_by_id(IMX8MN_CLK_A53_DIV, &clkp1);
-	clk_set_rate(clkp1, 1200000000UL);
-#endif
-
 	return 0;
 }
 
-- 
2.16.4