[PATCH v5 0/2] add optee support for broadcom NS3 soc

Rayagonda Kokatanur rayagonda.kokatanur at broadcom.com
Wed Jul 15 19:27:18 CEST 2020

This is fourth patch set series prepared on top of third
patch set ("add FIT image support for broadcom NS3 soc").

This patch adds optee support.

Changes from v4:
 -Address review comments from Simon,
  Add blank line before return.

Changes from v3:
 -Address review comments from Simon,
  Rearrange code and remove while loop,
  Add comments for function.

Changes from v2:
 -Address review comments from Simon,
  Remove own return code and use standard error code.
  Take out common lines from different functions and move them
  into common static function.
  Remove include <common.h> as its not required.
  Move functions with printf from header file into c file.

 -Address slef review comments,
  Remove optee dt node as this file is no longer in sync with linux.

Changes from v1:
 -Address review comments from Thomas Fitzsimmons,
  Expand the bnxt full form.

 -Address review comments from Simon Glass,
  Move c file from board/broadcom/bcmns3/chimp_optee.c to 
  Move header file from include/brcm/chimp.h to include/broadcom/chimp.h

Rayagonda Kokatanur (1):
  configs: ns3: enable tee and optee driver

Vikas Gupta (1):
  drivers: tee: broadcom: add optee based bnxt fw load driver

 configs/bcm_ns3_defconfig          |   5 +-
 drivers/tee/Kconfig                |   1 +
 drivers/tee/Makefile               |   1 +
 drivers/tee/broadcom/Kconfig       |   7 ++
 drivers/tee/broadcom/Makefile      |   3 +
 drivers/tee/broadcom/chimp_optee.c | 183 +++++++++++++++++++++++++++++
 include/broadcom/chimp.h           |  43 +++++++
 7 files changed, 242 insertions(+), 1 deletion(-)
 create mode 100644 drivers/tee/broadcom/Kconfig
 create mode 100644 drivers/tee/broadcom/Makefile
 create mode 100644 drivers/tee/broadcom/chimp_optee.c
 create mode 100644 include/broadcom/chimp.h


More information about the U-Boot mailing list