[PATCH] xilinx: zynqmp: Add support for saving variables

[Michal Simek]

Enabling saving variables to MMC(FAT), NAND, SPI based on primary bootmode.
Maybe that logic can be tuned for more complicated use cases and better
tested for different bootmodes.

Tested on zcu104 to SD(FAT) and JTAG(NOWHERE).

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

SPI is not tested and tuning is required.
---
 board/xilinx/zynqmp/zynqmp.c         | 35 ++++++++++++++++++++++++++++
 configs/xilinx_zynqmp_virt_defconfig |  6 +++++
 2 files changed, 41 insertions(+)

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 8a4df6fc1ab6..b11abd0e7d04 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -9,6 +9,7 @@
 #include <cpu_func.h>
 #include <debug_uart.h>
 #include <env.h>
+#include <env_internal.h>
 #include <init.h>
 #include <log.h>
 #include <net.h>
@@ -732,3 +733,37 @@ int checkboard(void)
 	puts("Board: Xilinx ZynqMP\n");
 	return 0;
 }
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	u32 bootmode = zynqmp_get_bootmode();
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+	switch (bootmode) {
+	case EMMC_MODE:
+	case SD_MODE:
+	case SD1_LSHFT_MODE:
+	case SD_MODE1:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
+			return ENVL_FAT;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
+			return ENVL_EXT4;
+		return ENVL_UNKNOWN;
+	case NAND_MODE:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
+			return ENVL_NAND;
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
+			return ENVL_UBI;
+		return ENVL_UNKNOWN;
+	case QSPI_MODE_24BIT:
+	case QSPI_MODE_32BIT:
+		if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
+			return ENVL_SPI_FLASH;
+		return ENVL_UNKNOWN;
+	case JTAG_MODE:
+	default:
+		return ENVL_NOWHERE;
+	}
+}
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index c84bf2008a19..53cc0c3bf475 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -57,6 +57,12 @@ CONFIG_CMD_UBI=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
 CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA zynqmp-topic-miamimp-xilinx-xdp-v1r1"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_EXT4_INTERFACE="mmc"
+CONFIG_ENV_EXT4_DEVICE_AND_PART="1:auto"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
-- 
2.27.0