[U-boot, V2, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver
trini at konsulko.com
Wed Jul 29 15:43:03 CEST 2020
On Fri, Jun 19, 2020 at 07:17:16PM +0800, MarkLee wrote:
> The sgmii mode init flow is almost the same for all mediatek SoC, the
> only difference is the register offset(SGMSYS_GEN2_SPEED) is 0x2028
> in the old chip(mt7622) but changed to 0x128 for the newer chip(mt7629
> and the following chips).
> Signed-off-by: MarkLee <Mark-MC.Lee at mediatek.com>
Applied to u-boot/master, thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 659 bytes
Desc: not available
More information about the U-Boot