[PATCH 0/2] u-boot support for ODROID-C4

Anand Moon linux.amoon at gmail.com
Wed Jul 1 18:09:11 CEST 2020


Hi Neil,

On Wed, 1 Jul 2020 at 20:16, Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> On 01/07/2020 16:43, Anand Moon wrote:
> > Hi Neil,
> >
> > On Wed, 1 Jul 2020 at 18:38, Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>
> >> Hi,
> >>
> >> On 01/07/2020 13:31, Anand Moon wrote:
> >>> Hi Neil,
> >>>
> >>> On Wed, 1 Jul 2020 at 13:22, Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>>>
> >>>> Hi,
> >>>>
> >>>> On 30/06/2020 18:02, Anand Moon wrote:
> >>>>> Hi Neil,
> >>>>>
> >>>>> On Tue, 30 Jun 2020 at 18:30, Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> On 30/06/2020 13:33, Anand Moon wrote:
> >>>>>>> Hi Beniamino,
> >>>>>>>
> >>>>>>> On Wed, 6 May 2020 at 01:53, Beniamino Galvani <b.galvani at gmail.com> wrote:
> >>>>>>>>
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> these two patches add initial u-boot support for Hardkernel ODROID-C4.
> >>>>>>>>
> >>>>>>>> https://wiki.odroid.com/odroid-c4/odroid-c4
> >>>>>>>>
> >>>>>>>> Beniamino Galvani (2):
> >>>>>>>>   arm: dts: import ODROID-C4 device tree
> >>>>>>>>   boards: amlogic: add ODROID-C4 support
> >>>>>>>>
> >>>>>>>
> >>>>>>> Can you respin this patches, I would like to see these get merged in
> >>>>>>> the current u-boot release
> >>>>>>>
> >>>>>>> -Anand
> >>>>>>>
> >>>>>>
> >>>>>> The Odroid-C4 could re-use the new Odroid-N2 board support I submitted at [1]
> >>>>>>
> >>>>>> Anand, is the MAC address stored stored the same way on the C4 ?
> >>>>>>
> >>>>>> Neil
> >>>>>>
> >>>>>> [1] https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narmstrong@baylibre.com/
> >>>>>
> >>>>> I gave this patches a try on latest u-boot but I cannot make my Odroid
> >>>>> C4 to boot up uinsg microSD card and eMMC
> >>>>> Here are the logs.
> >>>>
> >>>> The PHY config must be wrong and it misses the -u-boot.dtsi to enable HDMI.
> >>>>
> >>>> Can you test my custodian test branch with my C4 support patchset ?
> >>>>
> >>>> https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogic-test
> >>>>
> >>>> This one is used in Armbian 5.4 release and our KernelCI lab.
> >>>>
> >>>> Neil
> >>>>
> >>>
> >>> Thanks.
> >>>
> >>> There seems to be a typo in the build instructions in #
> >>> doc/board/amlogic/odroid-c4.rst
> >>> instead of *g12b*, it should be *g12a*
> >>>
> >>> See below I get following build warning, which I fix locally,
> >>>
> >>> ./buildc4c.sh: line 78:
> >>> /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> >>> No such file or directory
> >>> ./buildc4c.sh: line 81:
> >>> /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> >>> No such file or directory
> >>> ./buildc4c.sh: line 84:
> >>> /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> >>> No such file or directory
> >>> ./buildc4c.sh: line 87:
> >>> /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> >>> No such file or directory
> >>> ./buildc4c.sh: line 90:
> >>> /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> >>> No such file or directory
> >>> ./buildc4c.sh: line 92:
> >>> /home/amoon/mainline/u-boot/amlogic/w400/odroid-c4/fip/g12b/aml_encrypt_g12a:
> >>> No such file or directory
> >>>
> >>> After that fix I am able to boot my board using eMMC and microSD card.
> >>
> >> Thanks for testing, I'll push my serie rebased on v5.8-rc1 and fix this typo.
> >>
> >> Neil
> >>
> >
> > Thanks, I see the same issue with random mac address just like N2.
>
> Yes, my branch was not using the N2 board support with eFuses MAC readout,
> can you test my last patchset I just sent ? It should use the MAC from eFuses or
> generate an unique address with the SoC serial number.
>
Thanks

> Please apply the patch in [1] before the new Odroid-C4 serie.
>
> [1] https://patchwork.ozlabs.org/project/uboot/patch/20200618144037.23392-1-narmstrong@baylibre.com/
>
> Neil

I do not know the reason but your patches are not showing up on u-boot
patchwork.

[0] https://patchwork.ozlabs.org/project/uboot/list/

-Anand


More information about the U-Boot mailing list