[PATCH 0/6] efi_selftest: allow UEFI testing on MAIX

[Heinrich Schuchardt]

For RISC-V testing on real hardware the Sipeed MAIX boards provides an
affordable solution.

UEFI testing fails on the MAIX BiT with Mic because the UEFI sub-system
reserves 16 MiB for the stack though the board only has 8 MiB.

The first two patches make the size of the memory reserved for the stack
customizable on all boards defaulting to 16 MiB.

The value on the the MAIX BiT with Mic is set to 1 MiB.

Missing default load addresses for the MAIX BiT with Mic are added.

The sysreset driver is fixed to output the full reset message.

The UEFI network and block device unit tests are only built if the
configuration provides the prerequisites.


Heinrich Schuchardt (6):
  efi_loader: use CONFIG_STACK_SIZE in the UEFI sub-system
  configs: reduce stack size of Sipeed MAIX
  riscv: load addresses for Sipeed MAIX
  dm: sysreset: wait after reset message
  efi_selftest: SNP test depends on network
  efi_selftest: block device test requires CONFIG_DOS_PARTITION

 Kconfig                            | 10 ++++++++++
 arch/arm/Kconfig                   | 17 -----------------
 arch/microblaze/Kconfig            |  8 --------
 configs/sipeed_maix_bitm_defconfig |  1 +
 drivers/sysreset/sysreset-uclass.c |  1 +
 include/configs/sipeed-maix.h      |  9 +++++++++
 lib/efi_loader/efi_memory.c        |  2 +-
 lib/efi_selftest/Kconfig           |  2 ++
 lib/efi_selftest/Makefile          |  5 +++--
 9 files changed, 27 insertions(+), 28 deletions(-)

--
2.27.0