[PATCH v2 2/3] lib: fdt: Convert fdtdes_setup_mem..() to livetree API
Michal Simek
michal.simek at xilinx.com
Fri Jul 10 14:40:56 CEST 2020
Convert fdtdec_setup_mem_size_base(), get_next_memory_node(),
fdtdec_setup_memory_banksize() and fdtdec_setup_mem_size_base_lowest() to
livetree API.
Tested on ZynqMP zcu104 board.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Changes in v2:
- new patch asked by Simon
lib/fdtdec.c | 67 +++++++++++++++++++++++++++-------------------------
1 file changed, 35 insertions(+), 32 deletions(-)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index a10120baa895..39d73006e131 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -24,6 +24,7 @@
#include <asm/sections.h>
#include <linux/ctype.h>
#include <linux/lzo.h>
+#include <linux/ioport.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -1032,16 +1033,17 @@ int fdtdec_decode_display_timing(const void *blob, int parent, int index,
int fdtdec_setup_mem_size_base(void)
{
- int ret, mem;
- struct fdt_resource res;
+ int ret;
+ ofnode mem;
+ struct resource res;
- mem = fdt_path_offset(gd->fdt_blob, "/memory");
- if (mem < 0) {
+ mem = ofnode_path("/memory");
+ if (!ofnode_valid(mem)) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", 0, &res);
+ ret = ofnode_read_resource(mem, 0, &res);
if (ret != 0) {
debug("%s: Unable to decode first memory bank\n", __func__);
return -EINVAL;
@@ -1057,42 +1059,42 @@ int fdtdec_setup_mem_size_base(void)
#if defined(CONFIG_NR_DRAM_BANKS)
-static int get_next_memory_node(const void *blob, int mem)
+ofnode get_next_memory_node(ofnode mem)
{
do {
- mem = fdt_node_offset_by_prop_value(gd->fdt_blob, mem,
- "device_type", "memory", 7);
- } while (!fdtdec_get_is_enabled(blob, mem));
+ mem = ofnode_by_prop_value(mem, "device_type", "memory", 7);
+ } while (!ofnode_is_available(mem));
return mem;
}
int fdtdec_setup_memory_banksize(void)
{
- int bank, ret, mem, reg = 0;
- struct fdt_resource res;
+ int bank, ret, reg = 0;
+ struct resource res;
+ ofnode mem = ofnode_null();
- mem = get_next_memory_node(gd->fdt_blob, -1);
- if (mem < 0) {
+ mem = get_next_memory_node(mem);
+ if (!ofnode_valid(mem)) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res);
- if (ret == -FDT_ERR_NOTFOUND) {
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0) {
reg = 0;
- mem = get_next_memory_node(gd->fdt_blob, mem);
- if (mem == -FDT_ERR_NOTFOUND)
+ mem = get_next_memory_node(mem);
+ if (ofnode_valid(mem))
break;
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res);
- if (ret == -FDT_ERR_NOTFOUND)
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0)
break;
}
- if (ret != 0) {
+
+ if (ret != 0)
return -EINVAL;
- }
gd->bd->bi_dram[bank].start = (phys_addr_t)res.start;
gd->bd->bi_dram[bank].size =
@@ -1109,32 +1111,33 @@ int fdtdec_setup_memory_banksize(void)
int fdtdec_setup_mem_size_base_lowest(void)
{
- int bank, ret, mem, reg = 0;
- struct fdt_resource res;
+ int bank, ret, reg = 0;
+ struct resource res;
unsigned long base;
phys_size_t size;
- const void *blob = gd->fdt_blob;
+ ofnode mem = ofnode_null();
gd->ram_base = (unsigned long)~0;
- mem = get_next_memory_node(blob, -1);
- if (mem < 0) {
+ mem = get_next_memory_node(mem);
+ if (!ofnode_valid(mem)) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- ret = fdt_get_resource(blob, mem, "reg", reg++, &res);
- if (ret == -FDT_ERR_NOTFOUND) {
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0) {
reg = 0;
- mem = get_next_memory_node(blob, mem);
- if (mem == -FDT_ERR_NOTFOUND)
+ mem = get_next_memory_node(mem);
+ if (ofnode_valid(mem))
break;
- ret = fdt_get_resource(blob, mem, "reg", reg++, &res);
- if (ret == -FDT_ERR_NOTFOUND)
+ ret = ofnode_read_resource(mem, reg++, &res);
+ if (ret < 0)
break;
}
+
if (ret != 0)
return -EINVAL;
--
2.27.0
More information about the U-Boot
mailing list