[PATCH v2 3/6] gpio: mxc_gpio: add OF_PLATDATA support

Walter Lozano walter.lozano at collabora.com
Wed Jul 29 17:32:57 CEST 2020


Hi Stefano,

On 27/7/20 09:10, Stefano Babic wrote:
> Hi Walter,
>
> On 22.07.20 15:14, Walter Lozano wrote:
>> Continuing with the OF_PLATADATA support for iMX6 to reduce SPL
>> footprint, add it to mxc_gpio. Thanks to this, it will be possible to
>> enable card detection on MMC driver.
>>
>> Signed-off-by: Walter Lozano <walter.lozano at collabora.com>
>> ---
>>
> This conflicts with commit 6103e570cdd0d0e854b071ee17b14589356a82bd
> Author: Ye Li <ye.li at nxp.com>
> Date:   Tue Jun 9 20:29:51 2020 -0700
>
>      gpio: mxc_gpio: Improve to use ofdata_to_platdata
>
> already mainlined. Can you take a look ? Thanks !
>
Sure, thanks for pointing at the issue. I've already sent a new version.

Regards,

Walter

>> (no changes since v1)
>>
>>   drivers/gpio/mxc_gpio.c | 18 +++++++++++++++++-
>>   1 file changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
>> index 316dcc757b..fc49b5b577 100644
>> --- a/drivers/gpio/mxc_gpio.c
>> +++ b/drivers/gpio/mxc_gpio.c
>> @@ -13,6 +13,8 @@
>>   #include <asm/arch/imx-regs.h>
>>   #include <asm/gpio.h>
>>   #include <asm/io.h>
>> +#include <dt-structs.h>
>> +#include <mapmem.h>
>>   
>>   enum mxc_gpio_direction {
>>   	MXC_GPIO_DIRECTION_IN,
>> @@ -22,6 +24,10 @@ enum mxc_gpio_direction {
>>   #define GPIO_PER_BANK			32
>>   
>>   struct mxc_gpio_plat {
>> +#if CONFIG_IS_ENABLED(OF_PLATDATA)
>> +	/* Put this first since driver model will copy the data here */
>> +	struct dtd_gpio_mxc dtplat;
>> +#endif
>>   	int bank_index;
>>   	struct gpio_regs *regs;
>>   };
>> @@ -306,8 +312,16 @@ static int mxc_gpio_bind(struct udevice *dev)
>>   	 * is statically initialized in U_BOOT_DEVICES.Here
>>   	 * will return.
>>   	 */
>> -	if (plat)
>> +
>> +	if (plat) {
>> +#if CONFIG_IS_ENABLED(OF_PLATDATA)
>> +		struct dtd_gpio_mxc *dtplat = &plat->dtplat;
>> +
>> +		plat->regs = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
>> +		plat->bank_index = dev->req_seq;
>> +#endif
>>   		return 0;
>> +	}
>>   
>>   	addr = devfdt_get_addr(dev);
>>   	if (addr == FDT_ADDR_T_NONE)
>> @@ -350,6 +364,8 @@ U_BOOT_DRIVER(gpio_mxc) = {
>>   	.bind	= mxc_gpio_bind,
>>   };
>>   
>> +U_BOOT_DRIVER_ALIAS(gpio_mxc, fsl_imx6q_gpio)
>> +
>>   #if !CONFIG_IS_ENABLED(OF_CONTROL)
>>   static const struct mxc_gpio_plat mxc_plat[] = {
>>   	{ 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
>>
>


More information about the U-Boot mailing list