[PATCH 0/3] board: amlogic: add Odroid C4 support
Neil Armstrong
narmstrong at baylibre.com
Tue Jul 7 17:48:07 CEST 2020
Le 01/07/2020 à 16:43, Neil Armstrong a écrit :
> This patchset adds support for the Hardkernel Odroid-C4 board
> based on an Amlogic S905X3 SoC (SM1).
>
> These patches were made very early from Christian Hewitt when the device
> was unveiled by Hardkernel, and superseed the patchset from Beniamino Galvani
> posted later.
>
> Beniamino, sorry for posting this over your patchset, but they are essentially
> the same and this one is already used by LibreELEC, Armbian and out KernelCI
> boards.
>
> It used the new Odroid-N2 board support instead of W400, and adds a doc
> file in RsT format.
>
> Christian Hewitt (2):
> ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
> boards: amlogic: add Odroid C4 support
>
> Neil Armstrong (1):
> ARM: dts: meson-sm1-odroid-c4: add ethernet PHY reset
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/meson-g12-common.dtsi | 13 +-
> arch/arm/dts/meson-g12.dtsi | 32 +-
> arch/arm/dts/meson-g12b-khadas-vim3.dtsi | 22 +-
> arch/arm/dts/meson-g12b-s922x.dtsi | 15 +
> arch/arm/dts/meson-g12b.dtsi | 22 +
> arch/arm/dts/meson-khadas-vim3.dtsi | 4 +-
> arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi | 13 +
> arch/arm/dts/meson-sm1-odroid-c4.dts | 402 +++++++++++++++++++
> arch/arm/dts/meson-sm1-sei610.dts | 2 +-
> arch/arm/dts/meson-sm1.dtsi | 24 ++
> board/amlogic/odroid-n2/MAINTAINERS | 2 +
> configs/odroid-c4_defconfig | 62 +++
> doc/board/amlogic/index.rst | 3 +-
> doc/board/amlogic/odroid-c4.rst | 133 ++++++
> 15 files changed, 713 insertions(+), 37 deletions(-)
> create mode 100644 arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi
> create mode 100644 arch/arm/dts/meson-sm1-odroid-c4.dts
> create mode 100644 configs/odroid-c4_defconfig
> create mode 100644 doc/board/amlogic/odroid-c4.rst
>
Applied to u-boot-amlogic
More information about the U-Boot
mailing list