[PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH

Zhiqiang Hou Zhiqiang.Hou at nxp.com
Wed Jul 1 18:58:41 CEST 2020


From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

This patch set depends on:
https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olteanv@gmail.com/

Hou Zhiqiang (16):
  net: fsl_mdio: Change to use virtual address
  net: fsl_mdio: Correct the MII management register block address
  net: tsec: convert to use DM_MDIO when DM_ETH enabled
  net: tsec: Add fixed-link PHY support
  net: tsec: Add the compatible string "gianfar" support
  powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled
  fsl: p1_p2_rdb: Move vsc7835 firmware uploading to
    board_early_init_r()
  configs: p1_p2_rdb: Add the default address of vsc7385 firmware
  dts: powerpc: p1020rdb: Add eTSEC DT nodes
  powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled
  configs: P1020RDB: Enable DM_ETH config
  dts: powerpc: p1010rdb: Add eTSEC DT nodes
  powerpc: p1010rdb: Compile legacy ethernet init function when no
    DM_ETH
  configs: P1010RDB: Enable DM_ETH config
  dts: powerpc: p2020rdb: Add eTSEC DT nodes
  configs: P2020RDB: Enable DM_ETH config

 arch/powerpc/cpu/mpc8xxx/cpu.c                |  2 +
 arch/powerpc/dts/p1010rdb-pa.dts              |  1 +
 arch/powerpc/dts/p1010rdb-pa_36b.dts          |  1 +
 arch/powerpc/dts/p1010rdb.dtsi                | 50 +++++++++++++++
 arch/powerpc/dts/p1010si-post.dtsi            | 25 ++++++++
 arch/powerpc/dts/p1020-post.dtsi              | 20 +++++-
 arch/powerpc/dts/p1020rdb-pc.dts              |  1 +
 arch/powerpc/dts/p1020rdb-pc.dtsi             | 55 ++++++++++++++++
 arch/powerpc/dts/p1020rdb-pc_36b.dts          |  1 +
 arch/powerpc/dts/p1020rdb-pd.dts              | 45 ++++++++++++++
 arch/powerpc/dts/p2020-post.dtsi              | 10 ++-
 arch/powerpc/dts/p2020rdb-pc.dts              |  1 +
 arch/powerpc/dts/p2020rdb-pc.dtsi             | 50 +++++++++++++++
 arch/powerpc/dts/p2020rdb-pc_36b.dts          |  1 +
 arch/powerpc/dts/pq3-etsec1-0.dtsi            | 28 +++++++++
 arch/powerpc/dts/pq3-etsec1-1.dtsi            | 28 +++++++++
 arch/powerpc/dts/pq3-etsec1-2.dtsi            | 28 +++++++++
 arch/powerpc/dts/pq3-etsec1-3.dtsi            | 28 +++++++++
 arch/powerpc/dts/pq3-etsec2-0.dtsi            | 35 +++++++++++
 arch/powerpc/dts/pq3-etsec2-1.dtsi            | 35 +++++++++++
 arch/powerpc/dts/pq3-etsec2-2.dtsi            | 35 +++++++++++
 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi       | 16 +++++
 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi       | 16 +++++
 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi       | 16 +++++
 board/freescale/p1010rdb/p1010rdb.c           |  2 +
 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c   | 37 ++++++-----
 configs/P1010RDB-PA_36BIT_NAND_defconfig      |  2 +
 configs/P1010RDB-PA_36BIT_NOR_defconfig       |  2 +
 configs/P1010RDB-PA_36BIT_SDCARD_defconfig    |  2 +
 configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig  |  2 +
 configs/P1010RDB-PA_NAND_defconfig            |  2 +
 configs/P1010RDB-PA_NOR_defconfig             |  2 +
 configs/P1010RDB-PA_SDCARD_defconfig          |  2 +
 configs/P1010RDB-PA_SPIFLASH_defconfig        |  2 +
 configs/P1010RDB-PB_36BIT_NAND_defconfig      |  2 +
 configs/P1010RDB-PB_36BIT_NOR_defconfig       |  2 +
 configs/P1010RDB-PB_36BIT_SDCARD_defconfig    |  2 +
 configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig  |  2 +
 configs/P1010RDB-PB_NAND_defconfig            |  2 +
 configs/P1010RDB-PB_NOR_defconfig             |  2 +
 configs/P1010RDB-PB_SDCARD_defconfig          |  2 +
 configs/P1010RDB-PB_SPIFLASH_defconfig        |  2 +
 configs/P1020RDB-PC_36BIT_NAND_defconfig      |  3 +
 configs/P1020RDB-PC_36BIT_SDCARD_defconfig    |  3 +
 configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig  |  3 +
 configs/P1020RDB-PC_36BIT_defconfig           |  3 +
 configs/P1020RDB-PC_NAND_defconfig            |  3 +
 configs/P1020RDB-PC_SDCARD_defconfig          |  3 +
 configs/P1020RDB-PC_SPIFLASH_defconfig        |  3 +
 configs/P1020RDB-PC_defconfig                 |  3 +
 configs/P1020RDB-PD_NAND_defconfig            |  3 +
 configs/P1020RDB-PD_SDCARD_defconfig          |  3 +
 configs/P1020RDB-PD_SPIFLASH_defconfig        |  3 +
 configs/P1020RDB-PD_defconfig                 |  3 +
 configs/P2020RDB-PC_36BIT_NAND_defconfig      |  3 +
 configs/P2020RDB-PC_36BIT_SDCARD_defconfig    |  3 +
 configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig  |  3 +
 configs/P2020RDB-PC_36BIT_defconfig           |  3 +
 configs/P2020RDB-PC_NAND_defconfig            |  3 +
 configs/P2020RDB-PC_SDCARD_defconfig          |  3 +
 configs/P2020RDB-PC_SPIFLASH_defconfig        |  3 +
 configs/P2020RDB-PC_defconfig                 |  3 +
 doc/device-tree-bindings/net/fsl-tsec-phy.txt |  2 +-
 drivers/net/fsl_mdio.c                        | 28 +++++++--
 drivers/net/tsec.c                            | 62 ++++++++-----------
 include/configs/p1_p2_rdb_pc.h                |  2 +
 include/fsl_mdio.h                            |  4 ++
 include/tsec.h                                |  4 ++
 68 files changed, 698 insertions(+), 63 deletions(-)
 create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi
 create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi
 create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi

-- 
2.25.1



More information about the U-Boot mailing list