[PATCH v2 2/6] mmc: meson-gx: enable input clocks

[Neil Armstrong]

On 27/02/2020 12:27, Jerome Brunet wrote:
> Until now, the mmc clock was left in a good enough state by the ROM
> code to be used by the controller. However on some SoC, if the ROM
> code finds a bootloader on USB or SPI, it might leave the MMC clock
> in state the controller cannot work with.
> 
> Enable the input clocks provided to the mmc controller. While the
> u-boot mmc controller driver is not doing fancy settings like the Linux,
> it at least needs to make these clocks are running.
> 
> Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
> ---
>  drivers/mmc/meson_gx_mmc.c | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> index 031cc79ccb1f..7060f15787f6 100644
> --- a/drivers/mmc/meson_gx_mmc.c
> +++ b/drivers/mmc/meson_gx_mmc.c
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <common.h>
> +#include <clk.h>
>  #include <dm.h>
>  #include <fdtdec.h>
>  #include <malloc.h>
> @@ -240,12 +241,23 @@ static int meson_mmc_probe(struct udevice *dev)
>  	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
>  	struct mmc *mmc = &pdata->mmc;
>  	struct mmc_config *cfg = &pdata->cfg;
> +	struct clk_bulk clocks;
>  	uint32_t val;
> +	int ret;
> +
>  #ifdef CONFIG_PWRSEQ
>  	struct udevice *pwr_dev;
> -	int ret;
>  #endif
>  
> +	/* Enable the clocks feeding the MMC controller */
> +	ret = clk_get_bulk(dev, &clocks);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_enable_bulk(&clocks);
> +	if (ret)
> +		return ret;
> +
>  	cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |
>  			MMC_VDD_31_32 | MMC_VDD_165_195;
>  	cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
> 

This doesn't apply on master, will fix while applying.

Neil