March 2020 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Mar 1 14:31:26 CET 2020
Ending: Tue Mar 31 22:45:02 CEST 2020
Messages: 3365

• [cmd] Notation for "mandatory" and "optional" parameters in "help shell_cmd" output   Adarsh Babu Kalepalli
• [PATCH][v4 1/6] board: tbs2910: disable loadb and loads commands   Soeren Moch
• [PATCH][v4 2/6] board: tbs2910: disable CONFIG_GZIP   Soeren Moch
• [PATCH][v4 3/6] board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig   Soeren Moch
• [PATCH][v4 4/6] board: tbs2910: enable CONFIG_DISTRO_DEFAULTS   Soeren Moch
• [PATCH][v4 5/6] board: tbs2910: Enable distro_boot support.   Soeren Moch
• [PATCH][v4 6/6] board: tbs2910: add documentation   Soeren Moch
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• [cmd] Notation for "mandatory" and "optional" parameters in "help shell_cmd" output   Wolfgang Denk
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Lukasz Majewski
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• Fixing low-speed USB keyboard detection   Soeren Moch
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Lukasz Majewski
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH] mkimage: fit: don't create image with 0700 permissions   Thomas Hebb
• [PATCH] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Heinrich Schuchardt
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Tom Rini
• [PATCH] cmd: efidebug: fix a failure of "boot rm" sub-command   AKASHI Takahiro
• [PATCH] common: update_tftp: remove unnecessary build check   AKASHI Takahiro
• DE1-SoC Board Config   Jack Frye
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH] efi_loader: file: set a backend block device for file operations   AKASHI Takahiro
• [PATCH v5 08/33] doc: Fix typo in FIT documentation   Bin Meng
• [PATCH v5 10/33] dm: Fix error handling for dev_read_addr_ptr   Bin Meng
• [PATCH v5 12/33] lib: Always set errno in hcreate_r   Bin Meng
• [PATCH v5 14/33] gpio: sifive: Use generic reg read function   Bin Meng
• [PATCH v5 15/33] gpio: dw: Fix warnings about casting int to pointer   Bin Meng
• [PATCH v5 15/33] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
• Fix for build error /uboot/driver/video/simplefb.c   ARJUN C R
• Fix for build error /uboot/driver/video/simplefb.c   Chris Packham
• [PATCH] common: update_tftp: remove unnecessary build check   Heinrich Schuchardt
• [GIT PULL] Xilinx fixes for v2020.04-rc4   Michal Simek
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Tan, Ley Foon
• [PATCH] common: update_tftp: remove unnecessary build check   AKASHI Takahiro
• [PATCH] Change keyboard input from CrOS EC keyboard to a USB keyboard   Peter Robinson
• [PATCH 1/1] stm32mp1: rng: remove superfluous assignment   Patrick DELAUNAY
• [PATCH] configs: stm32mp1: Resync with savedefconfig   Patrick DELAUNAY
• [PATCH v3] doc: add board documentation for stm32mp1   Patrick DELAUNAY
• [PATCH v2] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
• [PATCH] imx6, aristainetos2c: add da9063 pmic setup   Heiko Schocher
• [PATCH 0/4] i2c: designware_i2c: Improvements for high speed mode   Jun Chen
• [PATCH 1/4] i2c: designware_i2c: Fix IC_CON register setting for high speed mode   Jun Chen
• [PATCH 2/4] i2c: designware_i2c: check is high speed possible support   Jun Chen
• [PATCH 3/4] i2c: designware_i2c: remove 'has_high_speed'   Jun Chen
• [PATCH 4/4] i2c: designware_i2c: add 'hs_hcnt' and 'hs_lcnt' for high speed   Jun Chen
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Rick Chen
• [PATCH] doc: spl: update reference to driver-model/README.txt   Patrick Delaunay
• [PATCH 1/1] doc: fix references to driver-model   Patrick DELAUNAY
• [PATCH] Revert "dm: core: device: switch off power domain after device removal"   Neil Armstrong
• [PATCH] Change keyboard input from CrOS EC keyboard to a USB keyboard   Michael Nazzareno Trimarchi
• [PATCH v2 1/6] dt-bindings: leds: import common led bindings from linux v5.5   Neil Armstrong
• [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Ley Foon Tan
• [PATCH v2 4/6] arm64: dts: meson: sync dt and bindings from v5.6-rc2   Neil Armstrong
• [PATCH 1/2] configs: socfpga: Add QSPI support for Cyclone 5   Ley Foon Tan
• [PATCH v2 5/6] arm64: dts: meson: import libretech-pc from linux v5.6-rc2   Neil Armstrong
• [PATCH] configs: socfpga: cyclone5: Enable CONFIG_NET_RANDOM_ETHADDR   Ley Foon Tan
• [PATCH v2 6/6] arm64: dts: meson: add libretech-pc support   Neil Armstrong
• [PATCH v2 0/6] arm64: meson: add libretech-pc support   Neil Armstrong
• [PATCH] arm64: versal: Enable support for Gigadevice/ISSI flashes   Michal Simek
• [PATCH 1/6] rockchip: efuse: Add support for rk3288 efuse   Kever Yang
• [PATCH 2/2] rockchip: efuse: Add support for rk1808 non-secure efuse   Kever Yang
• [PATCH v2 2/6] mmc: meson-gx: enable input clocks   Neil Armstrong
• [PATCH v2 4/6] arm64: dts: meson: sync dt and bindings from v5.6-rc2   Neil Armstrong
• [PATCH v2 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Andre Przywara
• [PATCH v2 6/6] arm64: dts: meson: add libretech-pc support   Neil Armstrong
• [PATCH v2 6/6] arm64: dts: meson: add libretech-pc support   Jerome Brunet
• [PATCH v2 6/6] arm64: dts: meson: add libretech-pc support   Neil Armstrong
• [PATCH 1/6] rockchip: efuse: Add support for rk3288 efuse   Philipp Tomsich
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Marek Vasut
• [PATCH 1/2] configs: socfpga: Add QSPI support for Cyclone 5   Marek Vasut
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Kristian Amlie
• [PATCH] configs: socfpga: cyclone5: Enable CONFIG_NET_RANDOM_ETHADDR   Marek Vasut
• [PATCH] stm32mp: psci: set cntfrq register of cpu on   Patrick Delaunay
• [Patch v2] arm: dts: lx2160aqds: Add FSPI node properties   Kuldeep Singh
• [PATCH] tee: optee: use dev_info in print_os_revision   Patrick Delaunay
• [PULL] Pull request: u-boot-stm32 = u-boot-stm32-20200203   Patrick DELAUNAY
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Lukasz Majewski
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Tom Rini
• [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI   Peter Robinson
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Kristian Amlie
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Lukasz Majewski
• [PATCH v2] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Wolfgang Wallner
• [GIT PULL] UniPhier SoC updates for v2020.04 (3rd)   Tom Rini
• Pull request for UEFI sub-system for efi-2020-04-rc4 (2)   Tom Rini
• [PATCH v2] bootcounter: add DM support for memory based bootcounter   Heiko Schocher
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Sean Anderson
• [GIT PULL] Xilinx fixes for v2020.04-rc4   Tom Rini
• [PULL] Pull request: u-boot-stm32 = u-boot-stm32-20200203   Tom Rini
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Tom Rini
• [PATCH] imx8qxp_mek: Fix the console command line string   Fabio Estevam
• [PATCH] imx8qxp_mek: Fix the console command line string   Stefano Babic
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH 1/1] cmd: efidebug: correct error message   Heinrich Schuchardt
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH] cmd: efidebug: fix a failure of "boot rm" sub-command   Heinrich Schuchardt
• DE1-SoC Board Config   Simon Goldschmidt
• [PATCH] Change keyboard input from CrOS EC keyboard to a USB keyboard   Simon Glass
• [PATCH v5 10/33] dm: Fix error handling for dev_read_addr_ptr   Simon Glass
• [PATCH v2 1/4] x86: fsp: Allow skipping init code when chain loading   Simon Glass
• [PATCH] doc: spl: update reference to driver-model/README.txt   Simon Glass
• [PATCH 2/7] Kconfig: update reference to README.x86   Simon Glass
• [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Simon Glass
• [PATCH v2] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Simon Glass
• [PATCH v2] bootcounter: add DM support for memory based bootcounter   Simon Glass
• caching BLOBLISTT_SPL_HANDOFF (was Re: [PATCH] common/board_f.c: use #ifdefs a little more consistently)   Simon Glass
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Simon Glass
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Tom Rini
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Tom Rini
• caching BLOBLISTT_SPL_HANDOFF   Rasmus Villemoes
• [PATCH] Revert "dm: core: device: switch off power domain after device removal"   Anatolij Gustschin
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Lukas Auer
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Lukas Auer
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Lukasz Majewski
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Simon Glass
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Sean Anderson
• Re: [PATCH v1 1/2] rockchip: rk3328: dts: add L2 cache entry【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [PATCH] configs: disable eMMC HS200 support on layerscape platforms   Yangbo Lu
• [PATCH v3] dm: uclass: don't assign aliased seq numbers   Simon Glass
• [PATCH v5 5/6] test: log: test syslog logging driver   sjg at google.com
• [PATCH v5 6/6] configs: sandbox: enable LOG_SYSLOG   sjg at google.com
• [PATCH v5 4/6] test: log functions with CONFIG_LOG=n   sjg at google.com
• [PATCH v5 3/6] log: output for CONFIG_LOG=n   sjg at google.com
• [PATCH v5 2/6] log: syslog driver   sjg at google.com
• [PATCH v5 1/6] log: correct CONFIG_LOG_TEST prerequisites   sjg at google.com
• [PATCH 2/2] video: meson: keep power domain up after booting   sjg at google.com
• [PATCH v3] dm: core: Move "/chosen" and "/firmware" node scan   sjg at google.com
• [PATCH 1/2] dm: core: Add a flag for power domain control on device removal   sjg at google.com
• [PATCH 1/1] dm: core: remove redundant if statement   sjg at google.com
• [PATCH 1/1] dm: core: remove redundant assignment   sjg at google.com
• [PATCH] sandbox: also restore terminal settings when killed by SIGINT   sjg at google.com
• [PATCH] sandbox: p2sb: Silence compiler warning   sjg at google.com
• [PATCH] serial: Set baudrate on boot   sjg at google.com
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Bin Meng
• [PATCH] mtd: spi-nor: Add Winbond W25Q256JW-IM support   Stefan Roese
• [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Michal Simek
• [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h   Rick Chen
• [PATCH] configs: am335x_evm: Enable DFU over TFTP support   Lokesh Vutla
• [PATCH] configs: am335x_evm: Enable Fastboot   Lokesh Vutla
• [PATCH v4] dm: uclass: don't assign aliased seq numbers   Michael Walle
• [PATCH v3 03/21] clk: actions: Add common clock driver   Amit Tomer
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Rick Chen
• [PATCH v3 09/21] arm: dts: Use consistent name "CLK_ETHERNET" for the Ethernet clock binding   Amit Tomer
• [PATCH] Change keyboard input from CrOS EC keyboard to a USB keyboard   Kever Yang
• [PATCH] debug_uart.h: make <debug_uart.h> self-contained   Kever Yang
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Ley Foon Tan
• [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Ley Foon Tan
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
• [PATCH v2] lib: Improve _parse_integer_fixup_radix base 16 detection   Andy Shevchenko
• Antwort: Re: [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Wolfgang Wallner
• [PATCH v3 03/21] clk: actions: Add common clock driver   Andre Przywara
• [PATCH v3 15/21] reset: add driver for generic reset controllers   Andre Przywara
• [PATCH 0/3] arm: dts: k3-j721e: Enable OSPI1/QSPI   Keerthy
• [PATCH 1/3] arm: dts: k3-j721e-common-proc-board-u-boot: Enable ospi1/qspi   Keerthy
• [PATCH 2/3] arm: dts: k3-j721e-mcu-wakeup: Add assigned-clocks/rates properties for ospi1/qspi   Keerthy
• [PATCH 3/3] arm: dts: k3-j721e-r5-common-proc-board: Add ospi1 flash node   Keerthy
• [PATCH v3 03/21] clk: actions: Add common clock driver   Amit Tomer
• [PATCH 1/3] arm: dts: k3-j721e-common-proc-board-u-boot: Enable ospi1/qspi   Vignesh Raghavendra
• [PATCH] tee: optee: use dev_info in print_os_revision   Jens Wiklander
• [GIT PULL] Xilinx fixes for v2020.04-rc4   Michal Simek
• [PATCH v2] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Marek Vasut
• [PATCH resend 0/2] gpio: mpc8xxx: honour shadow register when writing gpdat   Rasmus Villemoes
• [PATCH v4] dm: uclass: don't assign aliased seq numbers   Michal Simek
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• Imx8m mini boot   Iñigo Vicente Waliño
• [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h   Sean Anderson
• [PATCH v2] lib: Improve _parse_integer_fixup_radix base 16 detection   Andy Shevchenko
• [PATCH v2 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jonas Smedegaard
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
• [PATCH v2] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jonas Smedegaard
• [PATCH v3 2/2] sun50i: a64: A64-Teres-I board detect builtin keyboard   Jonas Smedegaard
• [PATCH v2 1/2] mtd: spi-nand: Import Toshiba SPI-NAND support   Robert Marko
• [PATCH v2 2/2] mtd: nand: spi: add support for Toshiba TC58CVG2S0HRAIJ   Robert Marko
• [PATCH V2] ARM: socfpga: Add initial support for the ABB SECU board   Marek Vasut
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Lukas Auer
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Sean Anderson
• Please pull u-boot-dm   Simon Glass
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Tan, Ley Foon
• [PATCH v3 0/3] usb: Covert to support Live DT   Kever Yang
• [PATCH v3 1/3] usb: dwc3-of-simple: Drop redundant inclding header file   Kever Yang
• [PATCH v3 2/3] usb: ehci-msm: Use dev interface to get device address   Kever Yang
• [PATCH v3 3/3] usb: Migrate to support live DT for some driver   Kever Yang
• [PATCH 0/2] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
• [PATCH 1/2] drivers/rng: simplify Kconfig   Heinrich Schuchardt
• [PATCH 2/2] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
• [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Simon Glass
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Simon Glass
• [RESEND v8 6/8] dm: arm64: ls1043a: add i2c DM support   Biwen Li
• [RESEND v8 7/8] dm: arm64: ls1046a: add i2c DM support   Biwen Li
• [PATCH v2 0/3] arm: dts: k3-j721e: Enable OSPI1/QSPI   Keerthy
• [PATCH v2 1/3] arm: dts: k3-j721e: Enable ospi1/qspi   Keerthy
• [PATCH v2 2/3] arm: dts: k3-j721e-mcu-wakeup: Add assigned-clocks/rates properties for ospi1/qspi   Keerthy
• [PATCH v2 3/3] arm: dts: k3-j721e-r5-common-proc-board: Add ospi1 flash node   Keerthy
• [PATCH v2 0/3] arm: dts: k3-j721e: Enable OSPI1/QSPI   Lokesh Vutla
• [PATCH v2 0/3] arm: dts: k3-j721e: Enable OSPI1/QSPI   Keerthy
• [PATCH v5 33/33] riscv: Add Sipeed Maix support   Rick Chen
• [PATCH v5 19/33] spi: dw: Add device tree properties for fields in CTRL1   Rick Chen
• [Patch v5 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API   Kuldeep Singh
• [PATCH v5 28/33] riscv: Add option to support RISC-V privileged spec 1.9   Rick Chen
• [PATCH v3 00/11] Add Support for eMMC boot in AM65x and J721e   Faiz Abbas
• [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Michal Simek
• [PATCH v5 13/33] pinctrl: Add support for Kendryte K210 FPIOA   Rick Chen
• [PATCH v5 03/33] clk: Unconditionally recursively en-/dis-able clocks   Rick Chen
• [PATCH] Makefile: doesn't need check stack size when dtb is not built   AKASHI Takahiro
• [PATCH v5 07/33] clk: Add K210 clock support   Rick Chen
• [PATCH v5 33/33] riscv: Add Sipeed Maix support   Rick Chen
• [PATCH V2] ARM: socfpga: Add initial support for the ABB SECU board   Holger Brunck
• [PATCH] arm64: zynqmp: Check firmware node when driver is enabled   Michal Simek
• [v1 PATCH 1/1] riscv: Add boot hartid to Device tree   Rick Chen
• [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Ley Foon Tan
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Andre Przywara
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jonas Smedegaard
• [PATCH 0/1] arm: mediatek: remove unused binman config   Sam Shih
• [PATCH 1/1] arm: mediatek: remove unused binman config   Sam Shih
• [PATCH 2/2] configs: socfpga: Add QSPI boot for Arria 10 SoCDK   Marek Vasut
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-socfpga/master   Marek Vasut
• [PATCH v3 1/3] usb: dwc3-of-simple: Drop redundant inclding header file   Marek Vasut
• [PATCH v3 3/3] usb: Migrate to support live DT for some driver   Marek Vasut
• [PATCH 0/3] ARM: Fix reset in SPL if SYSRESET is not used   Harald Seiler
• [PATCH 1/3] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Harald Seiler
• [PATCH 2/3] imx: imx8m*: Remove do_reset from board files   Harald Seiler
• [PATCH 3/3] imx: imx8m: Don't use the addr parameter of reset_cpu   Harald Seiler
• [PATCH 1/3] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Marek Vasut
• [PATCH 2/3] imx: imx8m*: Remove do_reset from board files   Marek Vasut
• [PATCH 3/3] imx: imx8m: Don't use the addr parameter of reset_cpu   Marek Vasut
• [U-Boot] [PATCH V3 15/27] imx8m: Fix MMU table issue for OPTEE memory   Igor Opaniuk
• [PATCH 3/3] imx: imx8m: Don't use the addr parameter of reset_cpu   Harald Seiler
• [PATCH 0/4] mx6cuboxi: enable support for OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH 1/4] mx6cuboxi: enable MMC and eMMC in DT for SPL   Walter Lozano
• [PATCH 2/4] mx6cuboxi: enable MMC iomux on board_early_init_f   Walter Lozano
• [PATCH 3/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH 4/4] mx6cuboxi: enable OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH v5 07/33] clk: Add K210 clock support   Sean Anderson
• [PATCH v5 13/33] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
• [PATCH v5 19/33] spi: dw: Add device tree properties for fields in CTRL1   Sean Anderson
• [PATCH v5 33/33] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Lukas Auer
• Please pull u-boot-dm   Tom Rini
• [PATCH] Makefile: doesn't need check stack size when dtb is not built   Stephen Warren
• [U-Boot] [PATCH V3 15/27] imx8m: Fix MMU table issue for OPTEE memory   Igor Opaniuk
• [PATCH 1/2] Makefile: Add environment variable DEVICE_TREE to header   Simon Glass
• [PATCH v3 3/3] usb: Migrate to support live DT for some driver   Simon Glass
• [PATCH v3 2/3] usb: ehci-msm: Use dev interface to get device address   Simon Glass
• [PATCH v3 0/3] usb: Covert to support Live DT   Marek Vasut
• [v1 PATCH 1/1] riscv: Add boot hartid to Device tree   Atish Patra
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [PATCH v4 1/5] dm: clk: add stub when CONFIG_CLK is desactivated   Simon Goldschmidt
• [PATCH v4 2/5] usb: host: dwc2: add phy support   Simon Goldschmidt
• [PATCH v4 3/5] usb: host: dwc2: add clk support   Simon Goldschmidt
• [PATCH v4 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Simon Goldschmidt
• [PATCH] net: phy: fix autoneg timeout   Simon Goldschmidt
• [PATCH 2/8] Revert "mtd: Rename free() to rfree()"   Simon Goldschmidt
• [PATCH 1/8] malloc: implement USE_DL_PREFIX via inline functions   Simon Goldschmidt
• [PATCH 1/8] malloc: implement USE_DL_PREFIX via inline functions   Tom Rini
• [PATCH 1/8] malloc: implement USE_DL_PREFIX via inline functions   Simon Glass
• caching BLOBLISTT_SPL_HANDOFF   Simon Glass
• [RFC] dm: uclass: add functions to get device by platdata   Simon Glass
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-socfpga/master   Tom Rini
• [PATCH] Makefile: doesn't need check stack size when dtb is not built   AKASHI Takahiro
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] Makefile: doesn't need check stack size when dtb is not built   Stephen Warren
• [PATCH] Makefile: doesn't need check stack size when dtb is not built   AKASHI Takahiro
• [U-Boot] [PATCH V3 15/27] imx8m: Fix MMU table issue for OPTEE memory   Peng Fan
• [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI   Rick Chen
• bitbake u-boot-imx: undefined reference to `eth_setenv_enetaddr'   Sivakumar Rajachidambaram (sikumar3)
• [RFC PATCH 0/1] Add boot hartid to a Device tree   Schaefer, Daniel (DualStudy)
• [PATCH v5 33/33] riscv: Add Sipeed Maix support   Bin Meng
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH] net: phy: fix autoneg timeout   Stefan Roese
• [PATCH 1/4] cmd: mem: Correctly count the errors in mtest   Stefan Roese
• [PATCH 2/4] cmd: mem: Drop eldk-4.2 workaround and use cast in unmap_sysmem()   Stefan Roese
• [PATCH 3/4] cmd: mem: Use IS_ENABLED instead of alt_test variable   Stefan Roese
• [PATCH 4/4] cmd: mem: Add bitflip memory test to alternate mtest   Stefan Roese
• [PATCH] net: phy: fix autoneg timeout   Simon Goldschmidt
• [PATCH] net: phy: Fix overlong PHY timeout   Simon Goldschmidt
• [RFC PATCH 0/1] Add boot hartid to a Device tree   Ard Biesheuvel
• [PATCH] arch: arm: rockchip: order the rk3399 entries alphabetically   Chen-Yu Tsai
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Ley Foon Tan
• [PATCH] ARM: zynq: Do not print message about boot device   Michal Simek
• [PATCH v2] serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()   Bin Meng
• [U-Boot] [PATCH V3 15/27] imx8m: Fix MMU table issue for OPTEE memory   Igor Opaniuk
• [U-Boot] [PATCH V3 15/27] imx8m: Fix MMU table issue for OPTEE memory   Peng Fan
• [PATCH v3 00/11] Add Support for eMMC boot in AM65x and J721e   Peng Fan
• [PATCH v3 0/6] arm64: meson: add libretech-pc support   Jerome Brunet
• [PATCH v3 1/6] dt-bindings: leds: import common led bindings from linux v5.5   Jerome Brunet
• [PATCH v3 2/6] mmc: meson-gx: enable input clocks   Jerome Brunet
• [PATCH v3 3/6] clk: meson: reset mmc clock on probe   Jerome Brunet
• [PATCH v3 4/6] arm64: dts: meson: sync dt and bindings from v5.6-rc2   Jerome Brunet
• [PATCH v3 5/6] arm64: dts: meson: import libretech-pc from linux v5.6-rc2   Jerome Brunet
• [PATCH v3 6/6] arm64: dts: meson: add libretech-pc support   Jerome Brunet
• [PATCH v3 00/11] Add Support for eMMC boot in AM65x and J721e   Jaehoon Chung
• [PATCH v3 2/6] mmc: meson-gx: enable input clocks   Anand Moon
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
• [U-Boot] [PATCH V3 15/27] imx8m: Fix MMU table issue for OPTEE memory   Igor Opaniuk
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• How to set boot count in U-boot for NXP iMX.6 Dual and Dual lite?   Pratik Rajyaguru
• Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] board: ti: README: Update OP-TEE binary name   Andrew F. Davis
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [PATCH] Makefile: doesn't need check stack size when dtb is not built   Stephen Warren
• [PATCH 1/2] drivers/rng: simplify Kconfig   Patrick DELAUNAY
• [PATCH v4 1/5] dm: clk: add stub when CONFIG_CLK is desactivated   Patrick DELAUNAY
• [PATCH v6 00/19] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v6 01/19] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v6 02/19] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v6 03/19] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v6 04/19] clk: Add functions to register CCF clock structs   Sean Anderson
• [PATCH v6 05/19] clk: Add K210 pll support   Sean Anderson
• [PATCH v6 06/19] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v6 07/19] clk: Add K210 clock support   Sean Anderson
• [PATCH v6 08/19] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v6 09/19] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v6 10/19] reset: Add generic reset driver   Sean Anderson
• [PATCH v6 11/19] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v6 12/19] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v6 13/19] riscv: Fix race conditions when initializing IPI   Sean Anderson
• [PATCH v6 14/19] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v6 15/19] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v6 16/19] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v6 17/19] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v6 18/19] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v6 19/19] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v4 2/5] usb: host: dwc2: add phy support   Patrick DELAUNAY
• [PATCH v1 0/8] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v1 1/8] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
• [PATCH v1 2/8] gpio: sifive: Use generic reg read function   Sean Anderson
• [PATCH v1 3/8] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
• [PATCH v1 4/8] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
• [PATCH v1 5/8] gpio: dw: Return output value when direction is out   Sean Anderson
• [PATCH v1 6/8] led: gpio: Default to using node name if label is absent   Sean Anderson
• [PATCH v1 7/8] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
• [PATCH v1 8/8] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• porting marvell-nand driver for u-boot   Zak Hays
• [PATCH v1 0/8] riscv: Add SPI support for Kendryte K210   Sean Anderson
• [PATCH v1 1/8] doc: Fix typo in FIT documentation   Sean Anderson
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Sean Anderson
• [PATCH v1 3/8] spi: dw: Rename "cs-gpio" to "cs-gpios"   Sean Anderson
• [PATCH v1 4/8] spi: dw: Use generic function to read reg address   Sean Anderson
• [PATCH v1 5/8] spi: dw: Speed up transfer loops   Sean Anderson
• [PATCH v1 6/8] spi: dw: Add mem_ops   Sean Anderson
• [PATCH v1 7/8] riscv: Add device tree bindings for SPI   Sean Anderson
• [PATCH v1 8/8] riscv: Add support for SPI on Kendryte K210   Sean Anderson
• [PATCH v1 1/3] verdin-imx8mm: adjust dram size in case bl32 is used   Igor Opaniuk
• [PATCH v1 2/3] imx8mm_evk: adjust dram size in case bl32 is used   Igor Opaniuk
• [PATCH v1 3/3] verdin-imx8mm: add nfsboot wrapper to env   Igor Opaniuk
• [PATCH v1] doc: board: verdin-imx8mm: use mainline TF-A   Igor Opaniuk
• [PATCH v1] doc: board: verdin-imx8mm: use mainline TF-A   Igor Opaniuk
• [PATCH v1 6/8] spi: dw: Add mem_ops   Eugeniy Paltsev
• [PATCH v2 06/12] phy: atheros: fix AR8021 PHY ID mask   Joe Hershberger
• [PATCH v2 08/12] phy: atheros: introduce debug read and write functions   Joe Hershberger
• [PATCH v2 09/12] phy: atheros: move delay config to common function   Joe Hershberger
• [PATCH v2 10/12] phy: atheros: add device tree bindings and config   Joe Hershberger
• [PATCH v2 11/12] phy: atheros: ar8035: remove static clock config   Joe Hershberger
• [PATCH v2 12/12] phy: atheros: consolidate {ar8031|ar8035}_config()   Joe Hershberger
• [PATCH 1/2] drivers: net: phy: aquantia: drop XGMII as a valid system interface proto   Joe Hershberger
• [PATCH 2/2] drivers: net: phy: aquantia: make it less verbose   Joe Hershberger
• [PATCH] doc: net: Rewrite network driver documentation   Joe Hershberger
• [PATCH] net: phy: Fix overlong PHY timeout   Joe Hershberger
• [PATCH] net: eth-uclass: Do not return error when no MAC is found   Joe Hershberger
• [PATCH v2] net: phy: add XFI, USXGMII types to is_10g_interface() helper   Joe Hershberger
• [PATCH] net: phy: dp83867: Add SGMII mode type switching   Joe Hershberger
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [RFT PATCH v5 0/3] Add compressed Image booting support   Atish Patra
• [RFT PATCH v5 1/3] lib: kconfig: Add option to set BZIP2 compression method   Atish Patra
• [RFT PATCH v5 2/3] image: Add a common compression type detection function.   Atish Patra
• [RFT PATCH v5 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [PATCH v4 13/14] sifive: fix palmer's email address   Palmer Dabbelt
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Tan, Ley Foon
• [RFC PATCH 0/1] Add boot hartid to a Device tree   Atish Patra
• [PATCH v4 01/14] misc: add driver for the SiFive otp controller   Palmer Dabbelt
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• [PATCH v1 6/8] spi: dw: Add mem_ops   Sean Anderson
• [PATCH] arm: socfpga: arria10: Add save_boot_params()   Tan, Ley Foon
• [RESEND v8 7/8] dm: arm64: ls1046a: add i2c DM support   Priyanka Jain (OSS)
• [PATCH v2 0/3] arm: dts: k3-j721e: Enable OSPI1/QSPI   Lokesh Vutla
• [U-Boot] [PATCH] board: ti: README: Update OP-TEE binary name   Lokesh Vutla
• [PATCH v4 01/14] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v4 13/14] sifive: fix palmer's email address   Pragnesh Patel
• [PATCH 1/2] riscv: Fix sbi_remote_sfence_vma{,_asid}   Bin Meng
• [PATCH 2/2] riscv: Avoid calling sbi_clear_ipi()   Bin Meng
• porting marvell-nand driver for u-boot   Miquel Raynal
• [PATCH v2 0/3] arm: socfpga: arria10: Add save_boot_params()   Ley Foon Tan
• [PATCH v2 1/3] arm: socfpga: Add onchip RAM size macro   Ley Foon Tan
• [PATCH v2 2/3] configs: socfpga: Change to use SOCFPGA_PHYS_OCRAM_SIZE macro   Ley Foon Tan
• [PATCH v2 3/3] arm: socfpga: arria10: Add save_boot_params()   Ley Foon Tan
• [PATCH] net: zynq-gem: Setup and use mdio base separately   Michal Simek
• [PATCH v5 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick Delaunay
• [PATCH v5 1/5] dm: clk: add stub when CONFIG_CLK is deactivated   Patrick Delaunay
• [PATCH v5 2/5] usb: host: dwc2: add phy support   Patrick Delaunay
• [PATCH v5 3/5] usb: host: dwc2: add clk support   Patrick Delaunay
• [PATCH v5 4/5] usb: host: dwc2: force reset assert   Patrick Delaunay
• [PATCH v5 5/5] usb: host: dwc2: add trace to have clean usb start   Patrick Delaunay
• [PATCH] i2c: stm32f7_i2c: allows for any bus frequency   Patrick Delaunay
• [PATCH 0/9] ram: stm32mp1: fixes   Patrick Delaunay
• [PATCH 1/9] ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR   Patrick Delaunay
• [PATCH 2/9] ram: stm32mp1: display result for software read DQS gating   Patrick Delaunay
• [PATCH 3/9] ram: stm32mp1: don't display the prompt two times   Patrick Delaunay
• [PATCH 4/9] ram: stm32mp1: tuning: add timeout for polling BISTGSR.BDDONE   Patrick Delaunay
• [PATCH 5/9] ram: stm32mp1: tuning: deactivate derating during BIST test   Patrick Delaunay
• [PATCH 6/9] ram: stm32mp1: update BIST config for tuning   Patrick Delaunay
• [PATCH 7/9] ram: stm32mp1_ddr: fix self refresh disable during DQS training   Patrick Delaunay
• [PATCH 8/9] ram: stm32mp1: reduce delay after BIST reset for tuning   Patrick Delaunay
• [PATCH 9/9] ram: stm32mp1: the property st,phy-cal becomes optional   Patrick Delaunay
• [PATCH] arm: imx: Add support for Google's Coral Dev Board   Alifer Moraes
• [PATCH v5 1/5] dm: clk: add stub when CONFIG_CLK is deactivated   Simon Goldschmidt
• [PATCH 1/2] drivers/rng: simplify Kconfig   Sughosh Ganu
• [PATCH v2 0/3] arm: socfpga: arria10: Add save_boot_params()   Marek Vasut
• [RFC] dm: uclass: add functions to get device by platdata   Simon Glass
• [PATCH 1/3] mips: mt76x8: ddr_cal: Rename dqs_test_valid() to dqs_test_error()   Stefan Roese
• [PATCH 2/3] mips: mt76x8: ddr_cal: Change types from u32 to int in dqs_find_min/max   Stefan Roese
• [PATCH 3/3] mips: mt76x8: ddr_cal: Correct dqs_find_min/max implementations   Stefan Roese
• [RFT PATCH v5 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
• [RFT PATCH v5 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [PATCH 1/6] bcm6750: add initial support   Philippe Reynes
• [PATCH 2/6] gpio: do not include <asm/arch/gpio.h> on ARCH_BCM6750   Philippe Reynes
• [PATCH 3/6] gpio: bcm6345: allow to use this driver on arm bcm6750   Philippe Reynes
• [PATCH 4/6] nand: brcmnand: add bcm6750 support   Philippe Reynes
• [PATCH 5/6] watchdog: bcm6345: allow to use this driver on arm bcm6750   Philippe Reynes
• [PATCH 6/6] bcm96750ref1: add initial support   Philippe Reynes
• [PATCH v2] ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1   Patrick Delaunay
• [PATCH v4 00/14] RISC-V SiFive FU540 support SPL   Palmer Dabbelt
• [PATCH v1 6/8] spi: dw: Add mem_ops   Eugeniy Paltsev
• [PATCH v3 0/4] Insure 16 alignment of reserved memory in board_f.c   Patrick Delaunay
• [PATCH v3 1/4] board_f.c: Insure gd->new_bootstage alignment   Patrick Delaunay
• [PATCH v3 2/4] Revert "stm32mp1: remove the imply BOOTSTAGE"   Patrick Delaunay
• [PATCH v3 3/4] arm: set the relocated gd with gd->new_gd   Patrick Delaunay
• [PATCH v3 4/4] board_f.c: Insure 16 alignment of start_addr_sp and reserved memory   Patrick Delaunay
• [PATCH v3 4/4] board_f.c: Insure 16 alignment of start_addr_sp and reserved memory   Stephen Warren
• [RFC] dm: uclass: add functions to get device by platdata   Simon Glass
• [PATCH v1 6/8] spi: dw: Add mem_ops   Sean Anderson
• [PATCH] ARM: socfpga: Enable DM RTC bootcount on ABB SECU1   Marek Vasut
• [PATCH v1 6/8] spi: dw: Add mem_ops   Sean Anderson
• [PATCH 1/1] efi_loader: unnecessary assignment in efi_queue_event   Heinrich Schuchardt
• [PATCH 00/20] gitlab: Simplify the test script   Simon Glass
• [PATCH 01/20] sandbox: Add documentation about required/useful packages   Simon Glass
• [PATCH 02/20] main: Drop show_boot_progress() prototype   Simon Glass
• [PATCH 03/20] buildman: Document the members of BuilderJob   Simon Glass
• [PATCH 04/20] bulidman: Add support for a simple build   Simon Glass
• [PATCH 05/20] gitlab: Use the -w option for sandbox_spl   Simon Glass
• [PATCH 06/20] azure: Use the -w option for sandbox_spl   Simon Glass
• [PATCH 07/20] gitlab: Use the --board buildman flag   Simon Glass
• [PATCH 08/20] gitlab: Drop the BUILDMAN variable   Simon Glass
• [PATCH 09/20] buildman: Update help for -d   Simon Glass
• [PATCH 10/20] gitlab: Drop the buildman -d flag   Simon Glass
• [PATCH 11/20] gitlab: Drop unnecessary if..fi   Simon Glass
• [PATCH 12/20] gitlab: Use -w flag for all builds   Simon Glass
• [PATCH 13/20] gitlab: Use bash to avoid needing a_test_which_does_not_exist   Simon Glass
• [PATCH 14/20] buildman: Allow ignoring warnings in the return code   Simon Glass
• [PATCH 15/20] gitlab: Use the buildman -W flag   Simon Glass
• [PATCH 16/20] gitlab: Enable test_handoff   Simon Glass
• [PATCH 17/20] buildman: Be more selective about which directories to remove   Simon Glass
• [PATCH 18/20] buildman: Allow building within a subdir of the current dir   Simon Glass
• [PATCH 19/20] test/py: Use buildman to build U-Boot   Simon Glass
• [PATCH 20/20] gitlab: Simplify the exit code for test.py   Simon Glass
• [PATCH v4 00/11] Actions S700 SoC support   Amit Singh Tomar
• [PATCH v4 01/11] arm: actions: Add common framework for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH v4 02/11] arm: actions: rename sysmap-s900 to sysmap-owl   Amit Singh Tomar
• [PATCH v4 03/11] clk: actions: Add common clock driver   Amit Singh Tomar
• [PATCH v4 04/11] arm: add support Actions Semi S700   Amit Singh Tomar
• [PATCH v4 05/11] arm: actions: add S700 SoC device tree   Amit Singh Tomar
• [PATCH v4 06/11] arm: dts: actions: s700: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v4 07/11] arm: dts: sync dts for Action Semi S900   Amit Singh Tomar
• [PATCH v4 08/11] arm: dts: actions: s900: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v4 09/11] serial: actions: add uart support for s700   Amit Singh Tomar
• [PATCH v4 10/11] arm: add Cubieboard7 board support   Amit Singh Tomar
• [PATCH v4 11/11] doc: boards: add Cubieboard7 documentation   Amit Singh Tomar
• [PATCH 1/2] drivers/rng: simplify Kconfig   Sughosh Ganu
• Aw: [PATCH 1/1] arm: mediatek: remove unused binman config   Frank Wunderlich
• [PATCH v2 1/1] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Heinrich Schuchardt
• [PATCH v2 1/1] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Eugeniu Rosca
• [PATCH v4 03/11] clk: actions: Add common clock driver   André Przywara
• [PATCH v4 03/11] clk: actions: Add common clock driver   Amit Tomer
• [PATCH] mmc: tmio: sdhi: Add DMA transfer address alignment check at writing   Marek Vasut
• [PATCH 1/5] common: bouncebuf: Permit passing custom alignment check function   Marek Vasut
• [PATCH 2/5] ARM: rmobile: Increase malloc area size   Marek Vasut
• [PATCH 3/5] mmc: tmio: sdhi: Use bounce buffer to avoid DMA limitations   Marek Vasut
• [PATCH 4/5] mmc: Add option to adjust b_max before long read   Marek Vasut
• [PATCH 5/5] mmc: tmio: sdhi: Implement get_b_max function   Marek Vasut
• [PATCH v4 03/11] clk: actions: Add common clock driver   André Przywara
• [PATCH v2 1/1] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Heinrich Schuchardt
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Simon Glass
• [PATCH v3 1/7] x86: fsp: Allow skipping init code when chain loading   Simon Glass
• [PATCH v3 2/7] x86: apl: Skip init code when chain loading   Simon Glass
• [PATCH v3 3/7] x86: cpu: Skip init code when chain loading   Simon Glass
• [PATCH v3 4/7] pci: Avoid auto-config when chain loading   Simon Glass
• [PATCH v3 5/7] board: Add a gd flag for chain loading   Simon Glass
• [PATCH v3 6/7] x86: Add a way to detect running from coreboot   Simon Glass
• [PATCH v3 7/7] x86: Use the existing stack when chain-loading   Simon Glass
• [PATCH] image.h: isolate android_image_* functions from tooling   Eugeniu Rosca
• [PATCH v2 1/1] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Eugeniu Rosca
• [PATCH 2/4] mx6cuboxi: enable MMC iomux on board_early_init_f   Baruch Siach
• [PATCH 3/4] mx6cuboxi: customize board_boot_order to access eMMC   Baruch Siach
• [PATCH v4 00/14] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH 0/2] timer: sti: mimic Linux declaration and usage   Nicolas Heemeryck
• [PATCH 1/2] timer: sti: convert to livetree   Nicolas Heemeryck
• [PATCH 2/2] timer: sti: use clk API to get timer clock rate   Nicolas Heemeryck
• AXP813 configuration for BananaPi M3   Vagrant Cascadian
• [PATCH] image.h: isolate android_image_* functions from tooling   Heinrich Schuchardt
• [RFT PATCH v5 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Lukasz Majewski
• [PATCH 02/18] clk: imx: imxrt1050-clk: fix typo in clock name "video:"   Lukasz Majewski
• [PATCH 01/18] clk: imx: pllv3: add enable_bit   Lukasz Majewski
• [PATCH] ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S), ULCB, Ebisu   Marek Vasut
• [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Giulio Benetti
• [PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration   Peng Fan
• [PATCH] ARM: socfpga: Enable DM RTC bootcount on ABB SECU1   Tan, Ley Foon
• [PATCH 005/108] tpm: cr50: Use the correct GPIO binding   Simon Glass
• [PATCH 013/108] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
• [PATCH] arm: socfpga: increase QSPI kernel Image size for Stratix10 and Agilex   Ooi, Joyce
• [PATCH v2 00/39] dm: Add programmatic generation of ACPI tables (part A)   Simon Glass
• [PATCH v2 01/39] cpu: Support querying the address width   Simon Glass
• [PATCH v2 02/39] spi: Add SPI mode enums   Simon Glass
• [PATCH v2 03/39] tpm: cr50: Release locality on exit   Simon Glass
• [PATCH v2 04/39] tpm: cr50: Add a comment for cr50_priv   Simon Glass
• [PATCH v2 05/39] tpm: cr50: Use the correct GPIO binding   Simon Glass
• [PATCH v2 06/39] tpm: Don't cleanup unless an error happens   Simon Glass
• [PATCH v2 07/39] dm: pci: Allow disabling auto-config for a device   Simon Glass
• [PATCH v2 08/39] x86: Correct wording of coreboot source code   Simon Glass
• [PATCH v2 09/39] x86: apl: Move p2sb ofdata reading to the correct method   Simon Glass
• [PATCH v2 10/39] pci: Adjust dm_pci_read_bar32() to return errors correctly   Simon Glass
• [PATCH v2 11/39] x86: apl: Add Global NVS table header   Simon Glass
• [PATCH v2 12/39] dm: core: Add basic ACPI support   Simon Glass
• [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
• [PATCH v2 14/39] acpi: Add a simple sandbox test   Simon Glass
• [PATCH v2 15/39] x86: Move acpi_table header to main include/ directory   Simon Glass
• [PATCH v2 16/39] acpi: Add an __ACPI__ preprocessor symbol   Simon Glass
• [PATCH v2 17/39] acpi: Add a central location for table version numbers   Simon Glass
• [PATCH v2 18/39] acpi: Add support for DMAR   Simon Glass
• [PATCH v2 19/39] acpi: Move acpi_fill_header() to generic code   Simon Glass
• [PATCH v2 20/39] acpi: Add a method to write tables for a device   Simon Glass
• [PATCH v2 21/39] acpi: Convert part of acpi_table to use acpi_ctx   Simon Glass
• [PATCH v2 22/39] x86: Allow devices to write ACPI tables   Simon Glass
• [PATCH v2 23/39] acpi: Drop code for missing XSDT from acpi_write_rsdp()   Simon Glass
• [PATCH v2 24/39] acpi: Move acpi_add_table() to generic code   Simon Glass
• [PATCH v2 25/39] acpi: Put table-setup code in its own function   Simon Glass
• [PATCH v2 26/39] acpi: Move the xsdt pointer to acpi_ctx   Simon Glass
• [PATCH v2 27/39] acpi: Add an acpi command   Simon Glass
• [PATCH v2 28/39] acpi: Add some tables required by the generation code   Simon Glass
• [PATCH v2 29/39] acpi: Add generation code for devices   Simon Glass
• [PATCH v2 30/39] acpi: Add functions to generate ACPI code   Simon Glass
• [PATCH v2 31/39] gpio: Add a method to convert a GPIO to ACPI   Simon Glass
• [PATCH v2 32/39] irq: Add a method to convert an interrupt to ACPI   Simon Glass
• [PATCH v2 33/39] acpi: Add support for SSDT generation   Simon Glass
• [PATCH v2 34/39] x86: acpi: Move MADT up a bit   Simon Glass
• [PATCH v2 35/39] acpi: Record the items added to SSDT   Simon Glass
• [PATCH v2 36/39] acpi: Support ordering SSDT data by device   Simon Glass
• [PATCH v2 37/39] x86: Allow devices to write an SSDT   Simon Glass
• [PATCH v2 38/39] acpi: Add support for DSDT generation   Simon Glass
• [PATCH v2 39/39] x86: Allow devices to write to DSDT   Simon Glass
• [PATCH] board: ls1028ardb: add BOARD_LATE_INIT config   andy.tang at nxp.com
• [PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration   Jaehoon Chung
• Antwort: [PATCH v2 02/39] spi: Add SPI mode enums   Wolfgang Wallner
• Antwort: [PATCH v2 08/39] x86: Correct wording of coreboot source code   Wolfgang Wallner
• Antwort: [PATCH v2 10/39] pci: Adjust dm_pci_read_bar32() to return errors correctly   Wolfgang Wallner
• Antwort: [PATCH v2 11/39] x86: apl: Add Global NVS table header   Wolfgang Wallner
• [PATCH v2 02/39] spi: Add SPI mode enums   Andy Shevchenko
• [PATCH v2 07/39] dm: pci: Allow disabling auto-config for a device   Andy Shevchenko
• [PATCH v2 08/39] x86: Correct wording of coreboot source code   Andy Shevchenko
• [RFQ] Boot Odroid-N2   Jaehoon Chung
• [PATCH] watchdog: cadence: Remove DECLARE_GLOBAL_DATA_PTR from driver   Michal Simek
• [PATCH v3 4/4] board_f.c: Insure 16 alignment of start_addr_sp and reserved memory   Patrick DELAUNAY
• [PATCH v1 0/2] Fix A10 clock driver crash after changes in DM core   chee.hong.ang at intel.com
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   chee.hong.ang at intel.com
• [PATCH v1 2/2] clk: socfpga: Switch to use ofnode API   chee.hong.ang at intel.com
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ley Foon Tan
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Tan, Ley Foon
• [PATCH v1 2/2] clk: socfpga: Switch to use ofnode API   Tan, Ley Foon
• [PATCH v4 00/21] Enable ARM Trusted Firmware for U-Boot   chee.hong.ang at intel.com
• [PATCH v4 01/21] configs: agilex: Remove CONFIG_OF_EMBED   chee.hong.ang at intel.com
• [PATCH v4 02/21] arm: socfpga: add fit source file for pack itb with ATF   chee.hong.ang at intel.com
• [PATCH v4 03/21] arm: socfpga: Add function for checking description from FIT image   chee.hong.ang at intel.com
• [PATCH v4 04/21] arm: socfpga: Load FIT image with ATF support   chee.hong.ang at intel.com
• [PATCH v4 05/21] arm: socfpga: Override 'lowlevel_init' to support ATF   chee.hong.ang at intel.com
• [PATCH v4 06/21] configs: socfpga: Enable FIT image loading with ATF support   chee.hong.ang at intel.com
• [PATCH v4 07/21] arm: socfpga: Disable "spin-table" method for booting Linux   chee.hong.ang at intel.com
• [PATCH v4 08/21] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)   chee.hong.ang at intel.com
• [PATCH v4 09/21] arm: socfpga: Define SMC function identifiers for PSCI SiP services   chee.hong.ang at intel.com
• [PATCH v4 10/21] arm: socfpga: soc64: Remove PHY interface setup from misc arch init   chee.hong.ang at intel.com
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   chee.hong.ang at intel.com
• [PATCH v4 12/21] arch: arm: socfpga: Enable driver model for misc drivers.   chee.hong.ang at intel.com
• [PATCH v4 13/21] mmc: dwmmc: socfpga: MMC driver access System Manager via 'altera_sysmgr'   chee.hong.ang at intel.com
• [PATCH v4 14/21] arch: arm: socfpga: Add 'altr, sysmgr-syscon' for MMC node in device tree   chee.hong.ang at intel.com
• [PATCH v4 15/21] net: designware: socfpga: MAC driver access System Manager via 'altera_sysmgr'   chee.hong.ang at intel.com
• [PATCH v4 16/21] arm: socfpga: Add ATF support for Reset Manager driver   chee.hong.ang at intel.com
• [PATCH v4 17/21] arm: socfpga: stratix10: Initialize timer in SPL   chee.hong.ang at intel.com
• [PATCH v4 18/21] arm: socfpga: Add ATF support to query FPGA configuration status   chee.hong.ang at intel.com
• [PATCH v4 19/21] arm: socfpga: stratix10: Add ATF support for FPGA reconfig driver   chee.hong.ang at intel.com
• [PATCH v4 20/21] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   chee.hong.ang at intel.com
• [PATCH v4 21/21] configs: socfpga: Add defconfig for Agilex and Stratix 10 without ATF support   chee.hong.ang at intel.com
• Antwort: [PATCH v2 12/39] dm: core: Add basic ACPI support   Wolfgang Wallner
• [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Lukasz Majewski
• [PATCH v3] arm: imx6: configure NoC on i.MX6DQP   Bernhard Messerklinger
• SPL NAND FOR IMX6ULL   kavya bc
• [RFQ] Boot Odroid-N2   Jaehoon Chung
• Please pull u-boot-x86   Tom Rini
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Marek Vasut
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Ang, Chee Hong
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [PATCH v2 0/2] ARM: zynq: Start to use unified configurations   Michal Simek
• [PATCH v2 1/2] Makefile: Add environment variable DEVICE_TREE to header   Michal Simek
• [PATCH v2 2/2] ARM: zynq: Switch to single zynq configurations   Michal Simek
• [PATCH 1/2] clk: stm32mp1: correct CKSELR masks   Patrick Delaunay
• [PATCH 2/2] clk: stm32mp1: add SPI5_K support   Patrick Delaunay
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• porting marvell-nand driver for u-boot   Zak Hays
• [PATCH] net: Fix error if some network features are disabled   Krebs, Olaf
• [U-Boot] [PATCH] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Andrew F. Davis
• [PATCH 19/20] test/py: Use buildman to build U-Boot   Stephen Warren
• [PATCH] Azure/Travis: Re-sync jobs and clarify exclusions   Tom Rini
• [PATCH 19/20] test/py: Use buildman to build U-Boot   Tom Rini
• [PATCH 07/20] gitlab: Use the --board buildman flag   Tom Rini
• [PATCH 05/20] gitlab: Use the -w option for sandbox_spl   Tom Rini
• [PATCH 00/20] gitlab: Simplify the test script   Tom Rini
• [PATCH 13/20] gitlab: Use bash to avoid needing a_test_which_does_not_exist   Tom Rini
• [PATCH 12/20] gitlab: Use -w flag for all builds   Tom Rini
• [PATCH 15/20] gitlab: Use the buildman -W flag   Tom Rini
• [PATCH v1 0/6] Adding support for KSZ9131 and add it to Toradex boards   Philippe Schenker
• [PATCH v1 1/6] net: phy: micrel: Use defines for PHY_IDs and MASK   Philippe Schenker
• [PATCH v1 2/6] net: phy: micrel: Add basic support for KSZ9131   Philippe Schenker
• [PATCH v1 3/6] ARM: dts: verdin-imx8mm: Remove unsupported rxc/txc MAC dly properties   Philippe Schenker
• [PATCH v1 4/6] verdin-imx8mm: Change board phy skew values for our ksz9031   Philippe Schenker
• [PATCH v1 5/6] board: verdin-imx8mm: Add KSZ9131 phy skew settings   Philippe Schenker
• [PATCH v1 6/6] board: apalis_imx6: Add KSZ9131 phy skew settings   Philippe Schenker
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [PATCH 1/2] net: fec: Add possibility to enable TXC delay   Philippe Schenker
• [PATCH 2/2] config: apalis-imx8: Enable FEC TXC delay   Philippe Schenker
• [PATCH 1/3] nand: brcmnand: add bcmbca support   Philippe REYNES
• [PATCH 2/3] configs: use unified bcmbca nand controller   Philippe REYNES
• [PATCH 3/3] brcmnand: drop arch specific nand controller   Philippe REYNES
• [PATCH 2/4] mx6cuboxi: enable MMC iomux on board_early_init_f   Walter Lozano
• [PATCH 3/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH] arm: imx: Add support for Google's Coral Dev Board   Marco Franchi
• [PATCH] image.h: use uint32_t instead of u32 in android_image_get_dtb*   Eugeniu Rosca
• [PATCH v2] Makefile: doesn't need check stack size when dtb is not built   AKASHI Takahiro
• [PATCH 1/2] riscv: Fix sbi_remote_sfence_vma{,_asid}   Bin Meng
• [PATCH 0/5] riscv: Add new SBI v0.2 extensions support   Bin Meng
• [PATCH 1/5] riscv: Mark existing SBI as v0.1 SBI   Bin Meng
• [PATCH 2/5] riscv: Add basic support for SBI v0.2   Bin Meng
• [PATCH 3/5] riscv: Add SBI v0.2 extension definitions   Bin Meng
• [PATCH 4/5] riscv: Introduce a new config for SBI v0.1   Bin Meng
• [PATCH 5/5] riscv: Implement new SBI v0.2 extensions   Bin Meng
• [PATCH] armv8: ls1028a: add dhcp boot target device   andy.tang at nxp.com
• [PATCH v6 03/19] clk: Unconditionally recursively en-/dis-able clocks   Rick Chen
• [PATCH 1/2] riscv: Fix sbi_remote_sfence_vma{,_asid}   Rick Chen
• [PATCH v6 03/19] clk: Unconditionally recursively en-/dis-able clocks   Rick Chen
• [PATCH v6 04/19] clk: Add functions to register CCF clock structs   Rick Chen
• How to set boot count in U-boot for NXP iMX.6 Dual and Dual lite?   Pratik Rajyaguru
• [U-Boot] [PATCH] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Lokesh Vutla
• [PATCH v6 13/19] riscv: Fix race conditions when initializing IPI   Rick Chen
• [PATCH v6 19/19] riscv: Add Sipeed Maix support   Rick Chen
• [PATCH v6 18/19] riscv: Add device tree for K210 and Sipeed Maix BitM   Rick Chen
• [PATCH v4 0/4] Ensure 16 alignment of reserved memory in board_f.c   Patrick Delaunay
• [PATCH v4 1/4] board_f.c: Ensure gd->new_bootstage alignment   Patrick Delaunay
• Antwort: [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Wolfgang Wallner
• [PATCH v4 2/4] Revert "stm32mp1: remove the imply BOOTSTAGE"   Patrick Delaunay
• [PATCH v4 3/4] arm: set the relocated gd with gd->new_gd   Patrick Delaunay
• [PATCH v4 4/4] board_f.c: Ensure 16 alignment of start_addr_sp and reserved memory   Patrick Delaunay
• Antwort: [PATCH v2 15/39] x86: Move acpi_table header to main include/ directory   Wolfgang Wallner
• Antwort: [PATCH v2 16/39] acpi: Add an __ACPI__ preprocessor symbol   Wolfgang Wallner
• [PATCH 1/2] board: sama5d3_xplained: Fix SPL DTB read from NAND   Eugen.Hristev at microchip.com
• Antwort: [PATCH v2 17/39] acpi: Add a central location for table version numbers   Wolfgang Wallner
• [PATCH 1/1 v1] cmd: gpio: Correct do_gpio() return value   Alex Kiernan
• Travis job time   Stefano Babic
• [PATCH v5 1/5] dm: clk: add stub when CONFIG_CLK is deactivated   Patrick DELAUNAY
• [PATCH v1 2/2] imx: imx8qm_rom7720_a1: fix broken fsl_esdhc_imx conversion   Stefano Babic
• [PATCH v6 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick Delaunay
• [PATCH v6 1/5] dm: clk: add stub when CONFIG_CLK is deactivated   Patrick Delaunay
• [PATCH v6 2/5] usb: host: dwc2: add phy support   Patrick Delaunay
• [PATCH v6 3/5] usb: host: dwc2: add clk support   Patrick Delaunay
• [PATCH v6 4/5] usb: host: dwc2: force reset assert   Patrick Delaunay
• [PATCH v6 5/5] usb: host: dwc2: add trace to have clean usb start   Patrick Delaunay
• EFI Payload problems, Congatec x86   Kim Bøndergaard
• [PATCH] cmd: gpio: Make `gpio input` return pin value again   Alex Kiernan
• [PATCH] arm: mach-k3: Add a separate function for printing sysfw version   Lokesh Vutla
• Travis job time   Bin Meng
• Travis job time   Tom Rini
• How to set boot count in U-boot for NXP iMX.6 Dual and Dual lite?   Igor Opaniuk
• [PATCH v1 3/6] ARM: dts: verdin-imx8mm: Remove unsupported rxc/txc MAC dly properties   Igor Opaniuk
• Travis job time   Stefano Babic
• [External] Re: How to set boot count in U-boot for NXP iMX.6 Dual and Dual lite?   Pratik Rajyaguru
• Travis job time   Tom Rini
• Antwort: [PATCH v2 18/39] acpi: Add support for DMAR   Wolfgang Wallner
• Antwort: [PATCH v2 19/39] acpi: Move acpi_fill_header() to generic code   Wolfgang Wallner
• [PATCH 1/1 v1] cmd: gpio: Correct do_gpio() return value   Tom Rini
• Antwort: [PATCH v2 14/39] acpi: Add a simple sandbox test   Wolfgang Wallner
• [PATCH v6 03/19] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [External] Re: How to set boot count in U-boot for NXP iMX.6 Dual and Dual lite?   Igor Opaniuk
• [PATCH v6 13/19] riscv: Fix race conditions when initializing IPI   Sean Anderson
• [PATCH v6 18/19] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v6 19/19] riscv: Add Sipeed Maix support   Sean Anderson
• [PULL] u-boot-atmel-fixes-2020.04-a   Eugen.Hristev at microchip.com
• [PATCH 1/1 v1] cmd: gpio: Correct do_gpio() return value   Alex Kiernan
• [PATCH v1 5/6] board: verdin-imx8mm: Add KSZ9131 phy skew settings   Igor Opaniuk
• [PATCH v1 4/6] verdin-imx8mm: Change board phy skew values for our ksz9031   Igor Opaniuk
• [PATCH v2 09/39] x86: apl: Move p2sb ofdata reading to the correct method   Andy Shevchenko
• [PATCH v2 12/39] dm: core: Add basic ACPI support   Andy Shevchenko
• [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Andy Shevchenko
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
• [PATCH] stm32mp: update dependency for STM32_ETZPC   Patrick Delaunay
• [U-Boot] [PATCH v2] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Andrew F. Davis
• [U-Boot] [PATCH] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Andrew F. Davis
• [PATCH v6 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Marek Vasut
• [PATCH] stm32mp: update dependency for STM32_ETZPC   Patrice CHOTARD
• [PATCH] configs: imxrt1050-evk: enable D/I cache   sbabic at denx.de
• [PATCH v1 1/2] imx: imx8qm_rom7720: added missing USDHC Base address defines   sbabic at denx.de
• [PATCH] mx6cuboxi: don't disable fdt relocation   sbabic at denx.de
• [PATCH 2/3] ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16   sbabic at denx.de
• [PATCH 3/3] imx: mx6ul_14x14_evk: configure for 24bpp display   sbabic at denx.de
• [PATCH] imx: remove woodburn board   sbabic at denx.de
• [PATCH 3/3] mx6sxsabresd: Enable DM_PCI   sbabic at denx.de
• [PATCH] serial_lpuart: make clock failure less verbose   sbabic at denx.de
• [PATCH v2] mx6sabresd: Convert ethernet to driver model   sbabic at denx.de
• [PATCH v2] mx6sabreauto: Convert to DM_ETH   sbabic at denx.de
• [PATCH] imx8qxp_mek: Fix the console command line string   sbabic at denx.de
• [PATCH v2] arm: dts: imx8mq-evk: add phy-reset-gpios for fec1   sbabic at denx.de
• [PATCH v1 2/2] ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dly   sbabic at denx.de
• [PATCH] imx6, aristainetos2c: add da9063 pmic setup   sbabic at denx.de
• [PATCH 2/2] imx8qxp_mek: Add myself as maintainer   sbabic at denx.de
• [PATCH] imx8mm/mn: Add missing root clock entry for ARM core clock   sbabic at denx.de
• [PATCH v3] mx6slevk: Convert to DM_ETH   sbabic at denx.de
• [PATCH 1/3] ARM: dts: imx6sx: Sync with kernel 5.4.16   sbabic at denx.de
• [PATCH v2] imx: imx8qm: enable relocation of fdt and initrd   sbabic at denx.de
• [PATCH v2] imx: Makefile: added missing ahab.o   sbabic at denx.de
• [PATCH] mx7dsabresd: Boot in non secure by default   sbabic at denx.de
• [PATCH 1/2] mx7dsabresd: Add myself as maintainer   sbabic at denx.de
• [PATCH v1 1/2] ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 node   sbabic at denx.de
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Stefano Babic
• [PATCH v2] Makefile: doesn't need check stack size when dtb is not built   Stephen Warren
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Simon Goldschmidt
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Fabio Estevam
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Ang, Chee Hong
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Simon Goldschmidt
• [PATCH v6 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick DELAUNAY
• [PATCH v4 00/21] Enable ARM Trusted Firmware for U-Boot   Simon Goldschmidt
• [PATCH v4 12/21] arch: arm: socfpga: Enable driver model for misc drivers.   Simon Goldschmidt
• [PATCH v4 14/21] arch: arm: socfpga: Add 'altr, sysmgr-syscon' for MMC node in device tree   Simon Goldschmidt
• [PATCH] Azure/Travis: Re-sync jobs and clarify exclusions   Tom Rini
• Pull request: u-boot-net.git master   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Fabio Estevam
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Tom Rini
• [PATCH] net: eth-uclass: Do not return error when no MAC is found   Joe Hershberger
• [PATCH v2 00/12] phy: atheros: dt bindings and cleanup   Joe Hershberger
• [PATCH v2 00/12] phy: atheros: dt bindings and cleanup   Tom Rini
• [PATCH v6 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Marek Vasut
• [PATCH] net: eth-uclass: Do not return error when no MAC is found   Fabio Estevam
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Simon Goldschmidt
• [PATCH v6 4/5] usb: host: dwc2: force reset assert   Simon Goldschmidt
• [PATCH v6 1/5] dm: clk: add stub when CONFIG_CLK is deactivated   Simon Goldschmidt
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Anatolij Gustschin
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Anatolij Gustschin
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Tom Rini
• [PULL] u-boot-atmel-fixes-2020.04-a   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200310   Tom Rini
• [PATCH v2] power-domain: fix hang in endless loop on i.MX8   Tom Rini
• [PATCH 0/4] TI K3 DSP remoteproc fixes/enhancements   Suman Anna
• [PATCH 1/4] remoteproc: k3-dsp: Fix unbalanced state machine in k3_dsp_start   Suman Anna
• [PATCH 2/4] remoteproc: k3-dsp: Add a sanity check for DSP boot address alignment   Suman Anna
• [PATCH 3/4] armv8: K3: j721e: Add DSP internal memory regions in MMU table   Suman Anna
• [PATCH 4/4] remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs   Suman Anna
• [PATCH 1/1] arm: mediatek: remove unused binman config   Tom Rini
• [PATCH v2 08/39] x86: Correct wording of coreboot source code   Simon Glass
• [PATCH 19/20] test/py: Use buildman to build U-Boot   Simon Glass
• [PATCH 07/20] gitlab: Use the --board buildman flag   Simon Glass
• [PATCH] remoteproc: k3-r5: Fix rproc init failure for Main R5FSS0   Suman Anna
• [PATCH v2] Makefile: doesn't need check stack size when dtb is not built   AKASHI Takahiro
• Please pull mmc-2020-3-9   Peng Fan
• [PATCH] remoteproc: k3-r5: Fix rproc init failure on Split-mode _only_ devices   Suman Anna
• [PATCH v6 13/19] riscv: Fix race conditions when initializing IPI   Rick Chen
• [PATCH v6 18/19] riscv: Add device tree for K210 and Sipeed Maix BitM   Rick Chen
• [PATCH] cmd: gpio: Make `gpio input` return pin value again   Simon Glass
• [PATCH v6 19/19] riscv: Add Sipeed Maix support   Rick Chen
• [PATCH v6 03/19] clk: Unconditionally recursively en-/dis-able clocks   Rick Chen
• [PATCH 19/20] test/py: Use buildman to build U-Boot   Simon Glass
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Simon Glass
• [U-Boot] [PATCH v2] defconfigs: am65x_hs_evm: Sync HS and non-HS defconfigs   Lokesh Vutla
• [PATCH v4 00/21] Enable ARM Trusted Firmware for U-Boot   Ang, Chee Hong
• [PATCH v4 12/21] arch: arm: socfpga: Enable driver model for misc drivers.   Ang, Chee Hong
• [PATCH] efi_loader: get_memory_map: return parameters whenever possible   AKASHI Takahiro
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Ang, Chee Hong
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Marek Vasut
• [PATCH 0/8] Add support for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH 1/8] phy: phy-mtk-tphy: add support USB phys   Chunfeng Yun
• [PATCH 2/8] phy: phy-mtk-tphy: add support new version   Chunfeng Yun
• [PATCH 3/8] phy: phy-mtk-tphy: add a new reference clock   Chunfeng Yun
• [PATCH 4/8] dm: core: Add function to get child count of ofnode   Chunfeng Yun
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH 6/8] arm: dts: mt7629: add support usb related nodes   Chunfeng Yun
• [PATCH 7/8] dt-bindings: phy-mtk-tphy: add properties of address mapping and clocks   Chunfeng Yun
• [PATCH 8/8] dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH v5 00/14] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v5 01/14] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v5 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v5 03/14] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v5 04/14] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v5 05/14] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v5 06/14] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v5 07/14] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v5 08/14] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Ang, Chee Hong
• [PATCH v5 09/14] clk: sifive: fu540-prci: Add clock initialization for SPL   Pragnesh Patel
• [PATCH v5 10/14] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v5 11/14] configs: fu540: Add config options for U-boot SPL   Pragnesh Patel
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Pragnesh Patel
• [PATCH v5 13/14] sifive: fix palmer's email address   Pragnesh Patel
• [PATCH v5 14/14] doc: update FU540 RISC-V documentation   Pragnesh Patel
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Marek Vasut
• [PATCH v4 14/21] arch: arm: socfpga: Add 'altr, sysmgr-syscon' for MMC node in device tree   Ang, Chee Hong
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH v4 14/21] arch: arm: socfpga: Add 'altr, sysmgr-syscon' for MMC node in device tree   Marek Vasut
• [PATCH] efi_loader: get_memory_map: return parameters whenever possible   Heinrich Schuchardt
• [PATCH 1/5] riscv: Mark existing SBI as v0.1 SBI   Pragnesh Patel
• [PATCH v4 11/21] misc: altera_sysmgr: Add Altera System Manager driver   Ang, Chee Hong
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PULL] Pull request: u-boot-stm32 =u-boot-stm32-20200310   Patrick DELAUNAY
• [PATCH v2] cmd: gpio: Make `gpio input` return pin value again   Alex Kiernan
• Antwort: [PATCH v2 19/39] acpi: Move acpi_fill_header() to generic code   Wolfgang Wallner
• [PATCH 2/5] riscv: Add basic support for SBI v0.2   Pragnesh Patel
• porting marvell-nand driver for u-boot   Miquel Raynal
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ley Foon Tan
• [PATCH 1/2] net: fec: Add possibility to enable TXC delay   Oleksandr Suvorov
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [PATCH 2/2] config: apalis-imx8: Enable FEC TXC delay   Oleksandr Suvorov
• [RESEND 1/1] eth: mtk-eth: add mt7531 switch support in mediatek eth driver   Landen Chao
• [PATCH v5 01/14] misc: add driver for the SiFive otp controller   Bin Meng
• [PATCH v1 1/6] net: phy: micrel: Use defines for PHY_IDs and MASK   Oleksandr Suvorov
• [PATCH] arm: baltos: switch to driver model for the net and mdio driver   Yegor Yefremov
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Michal Simek
• [PATCH v2 1/2] net: fec: Add possibility to enable TXC delay   Philippe Schenker
• [PATCH v2 2/2] config: apalis-imx8: Enable FEC TXC delay   Philippe Schenker
• [PATCH v3 1/2] net: fec: Add possibility to enable TXC delay   Philippe Schenker
• [PATCH v3 2/2] config: apalis-imx8: Enable FEC TXC delay   Philippe Schenker
• [PATCH v2 0/5] Adding support for KSZ9131 and add it to Toradex boards   Philippe Schenker
• [PATCH v2 1/5] net: phy: micrel: Use defines for PHY_IDs and MASK   Philippe Schenker
• [PATCH v2 2/5] net: phy: micrel: Add basic support for KSZ9131   Philippe Schenker
• [PATCH v2 3/5] verdin-imx8mm: Change board phy skew values for our ksz9031   Philippe Schenker
• [PATCH v2 4/5] board: verdin-imx8mm: Add KSZ9131 phy skew settings   Philippe Schenker
• [PATCH v2 5/5] board: apalis_imx6: Add KSZ9131 phy skew settings   Philippe Schenker
• [PATCH] bootcount_ext: Add flag to enable/disable bootcount   Frédéric Danis
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Stefan Roese
• [PATCH] watchdog: Align Kconfig properties   Michal Simek
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Michal Simek
• Antwort: [PATCH v2 20/39] acpi: Add a method to write tables for a device   Wolfgang Wallner
• Antwort: [PATCH v2 22/39] x86: Allow devices to write ACPI tables   Wolfgang Wallner
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Simon Glass
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Andy Shevchenko
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Andy Shevchenko
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Marek Vasut
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Stefan Roese
• [PATCH 0/2] ARC cache subsystem updates   Eugeniy Paltsev
• [PATCH 1/2] ARC: CACHE: add support for SL$ disable   Eugeniy Paltsev
• [PATCH 2/2] ARC: CACHE: mark IOC helper functions as inlined_cachefunc   Eugeniy Paltsev
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Michal Simek
• [PATCH v2 12/39] dm: core: Add basic ACPI support   Simon Glass
• [PATCH v2 09/39] x86: apl: Move p2sb ofdata reading to the correct method   Simon Glass
• [PATCH 4/8] dm: core: Add function to get child count of ofnode   Simon Glass
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Simon Glass
• [PATCH v1 1/2] clk: socfpga: Read the clock parent's register base in probe function   Simon Glass
• [PATCH v6 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick DELAUNAY
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Michal Simek
• [PATCH] ARC: HSDK: Enable on-chip reset controller   Eugeniy Paltsev
• [PATCH v6 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Marek Vasut
• Antwort: [PATCH v2 21/39] acpi: Convert part of acpi_table to use acpi_ctx   Wolfgang Wallner
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
• [PATCH v2 09/39] x86: apl: Move p2sb ofdata reading to the correct method   Andy Shevchenko
• [PATCH v5 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Bin Meng
• [PATCH v1 4/4] ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes   Igor Opaniuk
• Antwort: [PATCH v2 24/39] acpi: Move acpi_add_table() to generic code   Wolfgang Wallner
• [PATCH v5 04/14] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Bin Meng
• [PATCH] arm64: zynqmp: Add third backup bootmode   Michal Simek
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Tom Rini
• [PATCH] versal: watchdog: Add support for Xilinx window watchdog   Michal Simek
• [PATCH v2 0/4] mx6cuboxi: enable support for OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH v2 1/4] mx6cuboxi: enable MMC and eMMC in DT for SPL   Walter Lozano
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH v2 3/4] mx6cuboxi: enable OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH v2 4/4] mx6cuboxi: remove unused code   Walter Lozano
• Antwort: [PATCH v2 25/39] acpi: Put table-setup code in its own function   Wolfgang Wallner
• Antwort: [PATCH v2 23/39] acpi: Drop code for missing XSDT from acpi_write_rsdp()   Wolfgang Wallner
• [PATCH v5 05/14] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Bin Meng
• [PATCH v5 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Bin Meng
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Igor Opaniuk
• Antwort: [PATCH v2 26/39] acpi: Move the xsdt pointer to acpi_ctx   Wolfgang Wallner
• [PATCH v5 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Bin Meng
• [PATCH] lx2160a: Add dhcp in boot_targets   Meenakshi Aggarwal
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
• [PATCH] net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII   Nicolas Saenz Julienne
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Wolfgang Denk
• AXP813 configuration for BananaPi M3   Bernhard
• [PATCH] arm: baltos: switch to driver model for the net and mdio driver   Tom Rini
• Pull request for UEFI sub-system for efi-2020-04-rc4 (3)   Heinrich Schuchardt
• [PATCH] net: eth-uclass: Do not return error when no MAC is found   Joe Hershberger
• [PATCH] net: eth-uclass: Do not return error when no MAC is found   Fabio Estevam
• [PATCH v5 00/11] Actions S700 SoC support   Amit Singh Tomar
• [PATCH v5 01/11] arm: actions: Add common framework for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH v5 02/11] arm: actions: rename sysmap-s900 to sysmap-owl   Amit Singh Tomar
• [PATCH v5 03/11] arm: dts: sync dts for Action Semi S900   Amit Singh Tomar
• [PATCH v5 04/11] arm: dts: actions: s900: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v5 05/11] clk: actions: Add common clock driver   Amit Singh Tomar
• [PATCH v5 06/11] serial: actions: add uart support for s700   Amit Singh Tomar
• [PATCH v5 07/11] arm: actions: add S700 SoC device tree   Amit Singh Tomar
• [PATCH v5 08/11] arm: dts: actions: s700: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v5 09/11] arm: add support Actions Semi S700   Amit Singh Tomar
• [PATCH v5 10/11] arm: add Cubieboard7 board support   Amit Singh Tomar
• [PATCH v5 11/11] doc: boards: add Cubieboard7 documentation   Amit Singh Tomar
• Please pull mmc-2020-3-9   Tom Rini
• [PATCH 1/1] fit: check return value of fit_image_get_data_size()   Heinrich Schuchardt
• [PATCH 1/1] fit: check return value of fit_image_get_data_size()   Simon Goldschmidt
• [PATCH 1/2] riscv: Fix sbi_remote_sfence_vma{,_asid}   Lukas Auer
• [PATCH 2/2] riscv: Avoid calling sbi_clear_ipi()   Lukas Auer
• [PATCHv2 1/8] spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries   Tom Rini
• [PATCHv2 2/8] Kconfig: Remove redundant variable sets   Tom Rini
• [PATCHv2 3/8] edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfig   Tom Rini
• [PATCHv2 4/8] mach-davinci: Hard-code the default SPL_LDSCRIPT path   Tom Rini
• [PATCHv2 5/8] Azure / GitLab / Travis: Add Kconfig unit tests to a job   Tom Rini
• [PATCHv2 6/8] scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc   Tom Rini
• [PATCHv2 7/8] kconfig / kbuild: re-sync with Linux 4.18   Tom Rini
• [PATCHv2 8/8] configs: Drop '$(ARCH)' usage in CONFIG_SPL_LDSCRIPT   Tom Rini
• [PATCH] cmd: test: Add operators to deal with hexadecimal numbers.   Christoph Muellner
• [PATCH] bootcount_ext: Add flag to enable/disable bootcount   Simon Glass
• [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Simon Glass
• [PATCH v2 17/39] acpi: Add a central location for table version numbers   Simon Glass
• [PATCH] cmd: test: Add operators to deal with hexadecimal numbers.   Simon Glass
• [PATCH v2 21/39] acpi: Convert part of acpi_table to use acpi_ctx   Simon Glass
• [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
• [PATCHv2 4/8] mach-davinci: Hard-code the default SPL_LDSCRIPT path   Lokesh Vutla
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Baruch Siach
• [PATCH 1/2] efi_loader: Implement FileLoad2 for initramfs loading   AKASHI Takahiro
• [PATCHv2 2/8] Kconfig: Remove redundant variable sets   Rick Chen
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH 4/8] dm: core: Add function to get child count of ofnode   Chunfeng Yun
• [PATCH 1/2] efi_loader: Implement FileLoad2 for initramfs loading   Ilias Apalodimas
• [PATCH 09/15] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Vignesh Raghavendra
• [PATCH 1/2] efi_loader: Implement FileLoad2 for initramfs loading   AKASHI Takahiro
• [PATCH 1/2] efi_loader: Implement FileLoad2 for initramfs loading   Ilias Apalodimas
• [PATCH 09/15] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH] cmd: test: Add operators to deal with hexadecimal numbers.   Michal Simek
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Michal Simek
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Michal Simek
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Marek Vasut
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Michal Simek
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Marek Vasut
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Michal Simek
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Marek Vasut
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ley Foon Tan
• [PATCH] arm64: zynqmp Add support for zcu102 rev1.1   Michal Simek
• [PATCH] configs: lx2160a: Access flash memory as per spi-mem   Kuldeep Singh
• [PATCH] cmd: test: Add operators to deal with hexadecimal numbers.   Christoph Müllner
• [PATCH] cmd: test: Add operators to deal with hexadecimal numbers.   Michal Simek
• [PATCH] MAINTAINERS: update entry for ARM STI   Patrice Chotard
• [PATCH v2] arm64: zynqmp Add support for zcu102 rev1.1   Michal Simek
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Michal Simek
• [PATCHv2 2/8] Kconfig: Remove redundant variable sets   Michal Simek
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [PATCH v5 03/11] arm: dts: sync dts for Action Semi S900   Andre Przywara
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• [PATCH v5 07/11] arm: actions: add S700 SoC device tree   Andre Przywara
• [PATCH v5 05/11] clk: actions: Add common clock driver   Andre Przywara
• [PATCH v5 06/11] serial: actions: add uart support for s700   Andre Przywara
• [PATCH v5 08/11] arm: dts: actions: s700: add u-boot specific dtsi file   Andre Przywara
• [PATCH v5 09/11] arm: add support Actions Semi S700   Andre Przywara
• [PATCH v5 10/11] arm: add Cubieboard7 board support   Andre Przywara
• [PATCH] watchdog: allow overriding the rate-limiting logic   Rasmus Villemoes
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Michal Simek
• [PATCH] watchdog: allow overriding the rate-limiting logic   Stefan Roese
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Michal Simek
• [PATCH 1/2] timer: sti: convert to livetree   Patrice CHOTARD
• [PATCH 2/2] timer: sti: use clk API to get timer clock rate   Patrice CHOTARD
• Antwort: Re: [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Wolfgang Wallner
• [PATCH 0/3] armv8/ls104xardb: RGMII ports require internal delay   Madalin Bucur
• [PATCH 1/3] net: fman: add support for all RGMII delay modes   Madalin Bucur
• [PATCH 2/3] armv8/ls1043ardb: RGMII ports require internal delay   Madalin Bucur
• [PATCH 3/3] armv8/ls1046ardb: RGMII ports require internal delay   Madalin Bucur
• [PATCH] usb: host: dwc3-sti-glue: Use UCLASS_NOP instead of UCLASS_MISC   Patrice Chotard
• Antwort: Re: [PATCH v2 21/39] acpi: Convert part of acpi_table to use acpi_ctx   Wolfgang Wallner
• [PATCH] usb: host: dwc3-sti-glue: Use UCLASS_NOP instead of UCLASS_MISC   Marek Vasut
• [PATCH v5 00/17] Enable ARM Trusted Firmware for U-Boot   chee.hong.ang at intel.com
• [PATCH v5 01/17] configs: agilex: Remove CONFIG_OF_EMBED   chee.hong.ang at intel.com
• [PATCH v5 02/17] arm: socfpga: add fit source file for pack itb with ATF   chee.hong.ang at intel.com
• [PATCH v5 03/17] arm: socfpga: Add function for checking description from FIT image   chee.hong.ang at intel.com
• [PATCH v5 04/17] arm: socfpga: Load FIT image with ATF support   chee.hong.ang at intel.com
• [PATCH v5 05/17] arm: socfpga: Override 'lowlevel_init' to support ATF   chee.hong.ang at intel.com
• [PATCH v5 06/17] arm: socfpga: Disable "spin-table" method for booting Linux   chee.hong.ang at intel.com
• [PATCH v5 07/17] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)   chee.hong.ang at intel.com
• [PATCH v5 08/17] arm: socfpga: Define SMC function identifiers for PSCI SiP services   chee.hong.ang at intel.com
• [PATCH v5 09/17] arm: socfpga: soc64: Remove PHY interface setup from misc arch init   chee.hong.ang at intel.com
• [PATCH v5 10/17] mmc: dwmmc: socfpga: Add ATF support for MMC driver   chee.hong.ang at intel.com
• [PATCH v5 11/17] net: designware: socfpga: Add ATF support for MAC driver   chee.hong.ang at intel.com
• [PATCH v5 12/17] arm: socfpga: Add ATF support for Reset Manager driver   chee.hong.ang at intel.com
• [PATCH v5 13/17] arm: socfpga: stratix10: Initialize timer in SPL   chee.hong.ang at intel.com
• [PATCH v5 14/17] arm: socfpga: Add ATF support to query FPGA configuration status   chee.hong.ang at intel.com
• [PATCH v5 15/17] arm: socfpga: stratix10: Add ATF support for FPGA reconfig driver   chee.hong.ang at intel.com
• [PATCH v5 16/17] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   chee.hong.ang at intel.com
• [PATCH v5 17/17] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support   chee.hong.ang at intel.com
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Michal Simek
• [PATCH 19/20] test/py: Use buildman to build U-Boot   Tom Rini
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• Antwort: [PATCH v2 27/39] acpi: Add an acpi command   Wolfgang Wallner
• [PATCH] bootcount_ext: Add flag to enable/disable bootcount   Frédéric Danis
• ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Michal Simek
• [PATCH] watchdog: allow overriding the rate-limiting logic   Rasmus Villemoes
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Andy Shevchenko
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Dalon L Westergreen
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• regression with sunxi: psci: avoid error address-of-packed-member   Nuno Gonçalves
• [PATCH v1 6/8] spi: dw: Add mem_ops   Eugeniy Paltsev
• [PATCH 00/14] net: ldpaa_eth: transition to CONFIG_DM_ETH   Ioana Ciornei
• [PATCH 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Ioana Ciornei
• [PATCH 02/14] drivers: net: ldpaa: add support for probing based on the DTS   Ioana Ciornei
• [PATCH 03/14] drivers: net: fsl-mc: add support for CONFIG_DM_ETH   Ioana Ciornei
• [PATCH 04/14] board: ls1088ardb: transition to DM_ETH   Ioana Ciornei
• [PATCH 05/14] board: ls2088ardb: transition to DM_ETH   Ioana Ciornei
• [PATCH 06/14] arm: dts: lx2160a: add external MDIO nodes   Ioana Ciornei
• [PATCH 07/14] arm: dts: ls2088a: add external MDIO nodes   Ioana Ciornei
• [PATCH 08/14] arm: dts: ls1088a: add external MDIO nodes   Ioana Ciornei
• [PATCH 09/14] arm: dts: lx2160ardb: add DPMAC and PHY nodes   Ioana Ciornei
• [PATCH 10/14] arm: dts: ls2088ardb: add DPMAC and PHY nodes   Ioana Ciornei
• [PATCH 11/14] arm: dts: ls1088ardb: add DPMAC and PHY nodes   Ioana Ciornei
• [PATCH 12/14] configs: ls1088ardb: enable CONFIG_DM_ETH and related   Ioana Ciornei
• [PATCH 13/14] configs: ls2088ardb: enable CONFIG_DM_ETH and related   Ioana Ciornei
• [PATCH 14/14] configs: lx2160ardb: enable CONFIG_DM_ETH and related   Ioana Ciornei
• regression with sunxi: psci: avoid error address-of-packed-member   Tom Rini
• [PATCH] image.h: isolate android_image_* functions from tooling   Tom Rini
• [PATCH v7 1/7] lib: rsa: decouple rsa from FIT image verification   Tom Rini
• [PATCH v7 2/7] rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config   Tom Rini
• [PATCH v7 3/7] include: image.h: add key info to image_sign_info   Tom Rini
• [PATCH v7 4/7] lib: rsa: generate additional parameters for public key   Tom Rini
• [PATCH v7 5/7] lib: rsa: add rsa_verify_with_pkey()   Tom Rini
• [PATCH v7 6/7] test: add rsa_verify() unit test   Tom Rini
• [PATCH v7 7/7] test: enable RSA library test on sandbox   Tom Rini
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH v6 03/19] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• rockchip: rk3328 clock bindings   Kurt Miller
• [PATCH v1] colibri_imx6: set gpr1 ENET_CLK_SEL   Igor Opaniuk
• [PULL] Pull request: u-boot-stm32 =u-boot-stm32-20200310   Tom Rini
• Pull request for UEFI sub-system for efi-2020-04-rc4 (3)   Tom Rini
• [PATCH] spi: use is_power_of_2 instead of hweight32 in spi_nor_write()   Rasmus Villemoes
• [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
• [PATCH] bootcount_ext: Add flag to enable/disable bootcount   Simon Glass
• [PATCH] mkimage: fit_image: Make fit header and data align to 512   Kever Yang
• [PATCH] mkimage: fit_image: Make fit header and data align to 512   Heinrich Schuchardt
• [PATCH] include/configs: ls1012afrwy: fix load address of itb with bootm command   Biwen Li
• Re: rockchip: rk3328 clock bindings【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [PATCH 1/2] drivers/rng: simplify Kconfig   Heinrich Schuchardt
• [PATCH v5 06/14] sifive: fu540: add ddr driver   Bin Meng
• [PATCH v5 07/14] sifive: dts: fu540: Add DDR controller and phy register settings   Bin Meng
• [PATCH v5 08/14] clk: sifive: fu540-prci: Add clock enable and disable ops   Bin Meng
• [PATCH v5 09/14] clk: sifive: fu540-prci: Add clock initialization for SPL   Bin Meng
• [PATCH v5 08/14] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v5 10/14] riscv: sifive: fu540: add SPL configuration   Bin Meng
• [PATCH v5 11/14] configs: fu540: Add config options for U-boot SPL   Bin Meng
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Bin Meng
• [PATCH v5 13/14] sifive: fix palmer's email address   Bin Meng
• [PATCH v5 14/14] doc: update FU540 RISC-V documentation   Bin Meng
• Antwort: [PATCH v2 30/39] acpi: Add functions to generate ACPI code   Wolfgang Wallner
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Anup Patel
• [PATCH v1] colibri_imx6: set gpr1 ENET_CLK_SEL   Oleksandr Suvorov
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Bin Meng
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Anup Patel
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Anup Patel
• [PATCH] pci-host-ecam-generic: access config space independent of system-wide bus id   Vladimir Oltean
• Antwort: [PATCH v2 31/39] gpio: Add a method to convert a GPIO to ACPI   Wolfgang Wallner
• [PATCH] pci-host-ecam-generic: access config space independent of system-wide bus id   Alexandru Marginean
• [PATCH v2] pci-host-ecam-generic: access config space independent of system-wide bus id   Vladimir Oltean
• [PATCH v5 06/14] sifive: fu540: add ddr driver   Giulio Benetti
• [PATCH] mkimage: fit_image: Make fit header and data align to 512   Rasmus Villemoes
• [PATCH] mkimage: fit_image: Make fit header and data align to 512   Tom Rini
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Bin Meng
• [PATCH v5 10/14] riscv: sifive: fu540: add SPL configuration   Bin Meng
• [PATCH v3 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig   Vladimir Oltean
• [PATCH v3] pci-host-ecam-generic: access config space independent of system-wide bus id   Vladimir Oltean
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Rasmus Villemoes
• [PATCH 1/3] watchdog: remove stale ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS from wdt.h   Rasmus Villemoes
• [PATCH 2/3] watchdog: move initr_watchdog() to wdt-uclass.c   Rasmus Villemoes
• [PATCH 3/3] watchdog: honour hw_margin_ms DT property   Rasmus Villemoes
• [PATCH] serial: mcfuart: fix uart port index   Tom Rini
• [PATCH] serial: mcfuart: renaming to a more appropriate name   Tom Rini
• [PATCH v2] Makefile: doesn't need check stack size when dtb is not built   Tom Rini
• [PATCH v2] cmd: gpio: Make `gpio input` return pin value again   Tom Rini
• [PATCH] watchdog: Align Kconfig properties   Tom Rini
• [PATCH 1/1] fit: check return value of fit_image_get_data_size()   Tom Rini
• [PATCH] MAINTAINERS: update entry for ARM STI   Tom Rini
• [PATCH 0/4] Fixes for rv1108 and rv1108-elgin-r1   Otavio Salvador
• [PATCH 1/4] ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1   Otavio Salvador
• [PATCH 2/4] elgin-rv1108: Use rk_board_late_init() for GPIO settings   Otavio Salvador
• [PATCH 3/4] elgin-rv1108: Avoid adc_channel_single_shot error   Otavio Salvador
• [PATCH 4/4] rv1108: Fix boot regression   Otavio Salvador
• [PATCHv2 6/8] scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc   Rob Herring
• [PATCHv2 6/8] scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc   Tom Rini
• [PATCH v2 0/2] timer: sti: mimic Linux declaration and usage   Nicolas Heemeryck
• [PATCH v2 1/2] timer: sti: convert to livetree   Nicolas Heemeryck
• [PATCH v2 2/2] timer: sti: use clk API to get timer clock rate   Nicolas Heemeryck
• [PATCH v2 0/4] DT related fixes for RISC-V UEFI   Atish Patra
• [PATCH v2 1/4] riscv: Add boot hartid to Device tree   Atish Patra
• [PATCH v2 2/4] cmd: bootefi: Parse reserved-memory node from DT   Atish Patra
• [PATCH v2 3/4] riscv: Provide a mechanism for riscv boards to parse reserved memory   Atish Patra
• [PATCH v2 4/4] riscv: Setup reserved-memory node for FU540   Atish Patra
• [PATCH v2 0/4] DT related fixes for RISC-V UEFI   Atish Patra
• [PATCH v2 1/4] riscv: Add boot hartid to Device tree   Atish Patra
• [PATCH v2 3/4] riscv: Provide a mechanism for riscv boards to parse reserved memory   Atish Patra
• [PATCH v2 4/4] riscv: Setup reserved-memory node for FU540   Atish Patra
• [PATCH v2 2/4] cmd: bootefi: Parse reserved-memory node from DT   Atish Patra
• [PATCH v2 2/4] cmd: bootefi: Parse reserved-memory node from DT   Heinrich Schuchardt
• [PATCH 1/1] cmd: map addresses to sysmem in efidebug memmap   Heinrich Schuchardt
• [PATCH] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Pragnesh Patel
• [PATCH v2 2/4] cmd: bootefi: Parse reserved-memory node from DT   Heinrich Schuchardt
• [PATCH] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Bin Meng
• [PATCH v2 3/4] riscv: Provide a mechanism for riscv boards to parse reserved memory   Bin Meng
• [PATCH 1/1] efi_loader: create reservations after ft_board_setup   Heinrich Schuchardt
• [PATCH v2 4/4] riscv: Setup reserved-memory node for FU540   Bin Meng
• [PATCH] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Pragnesh Patel
• [PATCH v2] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Pragnesh Patel
• [PATCH 0/2] sandbox: provide memory reservations   Heinrich Schuchardt
• [PATCH 1/2] sandbox: add reserved-memory node in device tree   Heinrich Schuchardt
• [PATCH 2/2] sandbox: implement ft_board_setup()   Heinrich Schuchardt
• [PATCH 1/1] sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG   Heinrich Schuchardt
• [PATCH 1/3] watchdog: remove stale ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS from wdt.h   Stefan Roese
• [PATCH 2/3] watchdog: move initr_watchdog() to wdt-uclass.c   Stefan Roese
• [PATCH 3/3] watchdog: honour hw_margin_ms DT property   Stefan Roese
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Stefan Roese
• [RFC PATCH] cmd: mp: change the command name from cpu to mp   Pragnesh Patel
• [Patch v3 0/3] Enable octal read support for mt35xu* flashes   Kuldeep Singh
• [Patch v3 1/3] mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu*   Kuldeep Singh
• [Patch v3 2/3] arm: dts: ls1028a: Use flexspi in octal I/O mode   Kuldeep Singh
• [Patch v3 3/3] arm: dts: lx2160a: Use flexspi in octal I/O mode   Kuldeep Singh
• [RESEND Patch v2] configs: lx2160a: Enable FSPI support   Kuldeep Singh
• [PATCH v2] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Bin Meng
• [PATCH v2] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Pragnesh Patel
• [PATCH v2] riscv: ax25: cache: Remove SPL_RISCV_MMODE config check   Pragnesh Patel
• [RFC PATCH] cmd: mp: change the command name from cpu to mp   Bin Meng
• [RFC PATCH v2] cmd: mp: change the command name from cpu to mp   Pragnesh Patel
• [RFC PATCH v2] cmd: mp: change the command name from cpu to mp   Pragnesh Patel
• [RFC PATCH v2] cmd: mp: change the command name from cpu to mp   Pragnesh Patel
• [PATCH] usb: ehci: Fix "EHCI timed out on TD - token=XXXX" error on ehci-hcd   Marek Vasut
• [PATCH v4] dm: uclass: don't assign aliased seq numbers   sjg at google.com
• [PATCH 1/1] doc: driver-model: there is no UCLASS_ETHERNET   sjg at google.com
• [RFC PATCH] cmd: mp: change the command name from cpu to mp   Simon Glass
• [PATCH v2 30/39] acpi: Add functions to generate ACPI code   Simon Glass
• [PATCH 034/108] x86: acpi: Move MADT up a bit   Simon Glass
• `uclass_find_device_by_name` fails to find the device   Simon Glass
• [PATCH v3 1/9] image: android: Add functions for handling dtb field   Simon Glass
• [PATCH 2/2] test: verbatim character entry with CTRL-V   Simon Glass
• [PATCH] qemu: arm: Scan the pci bus in board_init   Simon Glass
• [PATCH 084/108] x86: acpi: Support generation of the DBG2 table   Simon Glass
• [PATCH 1/1] cmd: map addresses to sysmem in efidebug memmap   Simon Glass
• [PATCH 1/1] sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG   Simon Glass
• [PATCH 1/2] sandbox: add reserved-memory node in device tree   Simon Glass
• [PATCH 2/2] sandbox: implement ft_board_setup()   Simon Glass
• [PATCH] ARM: rmobile: Convert Gen2 Blanche to DM_SPI{,_FLASH}   Marek Vasut
• [PATCH] net: smc911x: Remove pkt_data_{push,pull}   Marek Vasut
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Marek Vasut
• [PATCHv2 7/8] kconfig / kbuild: re-sync with Linux 4.18   Masahiro Yamada
• [PATCHv2 1/8] spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries   Masahiro Yamada
• [PATCHv2 2/8] Kconfig: Remove redundant variable sets   Masahiro Yamada
• [PATCH 12/20] gitlab: Use -w flag for all builds   Simon Glass
• [PATCH 00/20] gitlab: Simplify the test script   Simon Glass
• [PATCH 1/1] sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG   Heinrich Schuchardt
• [PATCHv2 3/8] edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfig   Masahiro Yamada
• [PATCHv2 4/8] mach-davinci: Hard-code the default SPL_LDSCRIPT path   Masahiro Yamada
• [PATCHv2 8/8] configs: Drop '$(ARCH)' usage in CONFIG_SPL_LDSCRIPT   Masahiro Yamada
• [PATCH v3 1/1] cmd: bootefi: Parse reserved-memory node from DT   Heinrich Schuchardt
• [PATCH 00/20] gitlab: Simplify the test script   Tom Rini
• [PATCH 12/20] gitlab: Use -w flag for all builds   Tom Rini
• [PATCHv2 8/8] configs: Drop '$(ARCH)' usage in CONFIG_SPL_LDSCRIPT   Tom Rini
• [PATCH 00/20] gitlab: Simplify the test script   Simon Glass
• [PATCH 12/20] gitlab: Use -w flag for all builds   Simon Glass
• [PATCH 00/20] gitlab: Simplify the test script   Tom Rini
• [PATCH 12/20] gitlab: Use -w flag for all builds   Tom Rini
• [PATCH] rk3399: Add four clocks to clock driver needed by framebuffer   Peter Robinson
• [PATCH 12/20] gitlab: Use -w flag for all builds   Simon Glass
• [PATCH 1/1] sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG   Simon Glass
• [PATCH] rk3399: Add four clocks to clock driver needed by framebuffer   Wolfram Joost
• [PATCH 12/20] gitlab: Use -w flag for all builds   Tom Rini
• [PATCH 12/20] gitlab: Use -w flag for all builds   Simon Glass
• [PATCH 00/12] net: smc911x: Convert to DM   Marek Vasut
• [PATCH 01/12] net: smc911x: Remove pkt_data_{push,pull}   Marek Vasut
• [PATCH 02/12] net: smc911x: Replace malloc()+memset() with calloc()   Marek Vasut
• [PATCH 03/12] net: smc911x: Rename smc911x_rx() to smc911x_recv()   Marek Vasut
• [PATCH 04/12] net: smc911x: Invert the logic in smc911x_miiphy_{read, write}()   Marek Vasut
• [PATCH 05/12] net: smc911x: Fix potential memleak() in init fail path   Marek Vasut
• [PATCH 06/12] net: smc911x: Inline all functions from header file   Marek Vasut
• [PATCH 07/12] net: smc911x: Drop weak alias from 32bit accessors   Marek Vasut
• [PATCH 08/12] net: smc911x: Convert IO accessors to {read, write}{w, l}()   Marek Vasut
• [PATCH 09/12] net: smc911x: Pass around driver private data   Marek Vasut
• [PATCH 10/12] net: smc911x: Clean up the status handling in smc911x_recv()   Marek Vasut
• [PATCH 11/12] net: smc911x: Split non-DM specific bits from common code   Marek Vasut
• [PATCH 12/12] net: smc911x: Add DM support   Marek Vasut
• U-BOOT compatible device   Dimitris Takis
• [PATCH v2 00/23] gitlab: Simplify the test script   Simon Glass
• [PATCH v2 01/23] sandbox: Add documentation about required/useful packages   Simon Glass
• [PATCH v2 02/23] main: Drop show_boot_progress() prototype   Simon Glass
• [PATCH v2 03/23] buildman: Document the members of BuilderJob   Simon Glass
• [PATCH v2 04/23] bulidman: Add support for a simple build   Simon Glass
• [PATCH v2 05/23] buildman: Update help for -d   Simon Glass
• [PATCH v2 06/23] buildman: Allow ignoring warnings in the return code   Simon Glass
• [PATCH v2 07/23] buildman: Be more selective about which directories to remove   Simon Glass
• [PATCH v2 08/23] buildman: Allow building within a subdir of the current dir   Simon Glass
• [PATCH v2 09/23] buildman: Drop the -a option   Simon Glass
• [PATCH v2 10/23] travis: Don't copy files into .bm-work/   Simon Glass
• [PATCH v2 11/23] travis: Split the building into two parts   Simon Glass
• [PATCH v2 12/23] gitlab/azure: Use the -w option for sandbox_spl   Simon Glass
• [PATCH v2 13/23] travis/gitlab/azure: Use --board buildman flag with test.py   Simon Glass
• [PATCH v2 14/23] travis/gitlab/azure: Drop BUILDMAN variable with test.py   Simon Glass
• [PATCH v2 15/23] travis/gitlab/azure: Drop the buildman -d flag   Simon Glass
• [PATCH v2 16/23] gitlab/azure: Drop unnecessary if..fi when using test.py   Simon Glass
• [PATCH v2 17/23] gitlab/azure: Use -w flag for all test.py builds   Simon Glass
• [PATCH v2 18/23] travis/gitlab/azure: Use bash to avoid a_test_which_does_not_exist   Simon Glass
• [PATCH v2 19/23] travis/gitlab/azure: Drop the -E flag   Simon Glass
• [PATCH v2 20/23] travis/gitlab/azure: Enable test_handoff   Simon Glass
• [PATCH v2 21/23] travis/gitlab/azure: Simplify the exit code for test.py   Simon Glass
• [PATCH v2 22/23] travis/gitlab/azure: Drop repeated buildman call with test.py   Simon Glass
• [PATCH v2 23/23] test/py: Allow using buildman to build U-Boot   Simon Glass
• [PATCH] mkimage: fit_image: Make fit header and data align to 512   Punit Agrawal
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Kever Yang
• [PATCH] MAINTAINERS: update entry for ARM TI   Lokesh Vutla
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Punit Agrawal
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Punit Agrawal
• [PATCH] configs: ls1021a: Append othbootargs to bootargs   Alison Wang
• travis build fails for all arm boards   Heiko Schocher
• [PATCH] serial: mcfuart: renaming to a more appropriate name   Angelo Dureghello
• [PATCH] include/configs: ls1012aqds: add default environment variable   Biwen Li
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Kever Yang
• [PATCH] ARM: zynq: Enable i2c mux support for all boards   Michal Simek
• [PATCH] spi: use is_power_of_2 instead of hweight32 in spi_nor_write()   Vignesh Raghavendra
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Kever Yang
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Punit Agrawal
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Punit Agrawal
• [PATCH] net: eth-uclass: Fix message if mac is coming from DT or ROM   Michal Simek
• [PATCH 3/5] riscv: Add SBI v0.2 extension definitions   Pragnesh Patel
• [PATCH] MAINTAINERS: update entry for ARM TI   Vignesh Raghavendra
• [PATCH 4/5] riscv: Introduce a new config for SBI v0.1   Pragnesh Patel
• [PATCH 5/5] riscv: Implement new SBI v0.2 extensions   Pragnesh Patel
• [PATCH] mx7dsabre: Fix ramdisk_addr* for distro boot   Jan Kiszka
• [PATCH v2] mkimage: fit_image: Make fit header and data align to 512   Tom Rini
• [PATCH 0/4] Backplane KR support   Florinel Iordache
• [PATCH 1/4] phy: add support for backplane kr mode   Florinel Iordache
• [PATCH 2/4] ls1046aqds: add support for backplane kr   Florinel Iordache
• [PATCH 3/4] lx2160aqds: add support for backplane kr   Florinel Iordache
• [PATCH 4/4] t208xqds: add support for backplane kr   Florinel Iordache
• [v2, PATCH] include/configs: ls1012aqds: add default environment variable   Biwen Li
• [PATCH] watchdog: Use dev_read only if OF_PLATDATA is not enabled   Stefan Roese
• [PATCH] watchdog: Handle timer wrap around   Stefan Roese
• [PATCH] MAINTAINERS: update entry for ARM TI   Lokesh Vutla
• Please pull u-boot-marvell/master (watchdog related)   Stefan Roese
• [PATCH v2] MAINTAINERS: update entry for ARM TI   Lokesh Vutla
• [PATCH 0/4] TI K3 DSP remoteproc fixes/enhancements   Lokesh Vutla
• [PATCH] remoteproc: k3-r5: Fix rproc init failure for Main R5FSS0   Lokesh Vutla
• [PATCH] remoteproc: k3-r5: Fix rproc init failure on Split-mode _only_ devices   Lokesh Vutla
• [PATCH 3/3] watchdog: honour hw_margin_ms DT property   Rasmus Villemoes
• [PATCH 0/3] watchdog: honour hw_margin_ms property   Rasmus Villemoes
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Baruch Siach
• [PATCH] mach-snapdragon: Fix overwriting last digit of serial number   Jan-Christoph Tebbe
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Baruch Siach
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Dalon L Westergreen
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Baruch Siach
• travis build fails for all arm boards   Tom Rini
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [PATCH v2 3/4] riscv: Provide a mechanism for riscv boards to parse reserved memory   Atish Patra
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
• ext4: invalid extent block on imx7   Jan Kiszka
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [PATCH v2 4/4] riscv: Setup reserved-memory node for FU540   Atish Patra
• Please pull u-boot-marvell/master (watchdog related)   Tom Rini
• [PATCH 0/5] Misc fixes for Tegra   twarren at nvidia.com
• [PATCH 1/5] ARM: tegra: rework fdt_serial_tag_setup_one   twarren at nvidia.com
• [PATCH 2/5] t210: do not enable PLLE and UPHY PLL HW PWRSEQ   twarren at nvidia.com
• [PATCH 3/5] ARM: tegra: p2771-0000: enable PIE relocation   twarren at nvidia.com
• [PATCH 4/5] fdt: Fix 'system' command   twarren at nvidia.com
• [PATCH 5/5] ARM: Tegra: Use calc env var feature on all boards   twarren at nvidia.com
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Dalon L Westergreen
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Simon Goldschmidt
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Rasmus Villemoes
• [PATCH v2 06/23] buildman: Allow ignoring warnings in the return code   Tom Rini
• [PATCH] powerpc: allow opting out of WATCHDOG_RESET() from timer interrupt   Rasmus Villemoes
• [PATCH v2 14/23] travis/gitlab/azure: Drop BUILDMAN variable with test.py   Tom Rini
• [PATCH v2 19/23] travis/gitlab/azure: Drop the -E flag   Tom Rini
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Rasmus Villemoes
• [PATCH v2 10/23] travis: Don't copy files into .bm-work/   Tom Rini
• [PATCH v2 11/23] travis: Split the building into two parts   Tom Rini
• [PATCH v2 12/23] gitlab/azure: Use the -w option for sandbox_spl   Tom Rini
• [PATCH v2 13/23] travis/gitlab/azure: Use --board buildman flag with test.py   Tom Rini
• [PATCH v2 15/23] travis/gitlab/azure: Drop the buildman -d flag   Tom Rini
• [PATCH v2 16/23] gitlab/azure: Drop unnecessary if..fi when using test.py   Tom Rini
• [PATCH v2 17/23] gitlab/azure: Use -w flag for all test.py builds   Tom Rini
• [PATCH v2 18/23] travis/gitlab/azure: Use bash to avoid a_test_which_does_not_exist   Tom Rini
• [PATCH v2 20/23] travis/gitlab/azure: Enable test_handoff   Tom Rini
• [PATCH v2 22/23] travis/gitlab/azure: Drop repeated buildman call with test.py   Tom Rini
• [PATCH v2 23/23] test/py: Allow using buildman to build U-Boot   Tom Rini
• [PATCH resend 0/5] spi: mpc8xxx_spi: bug fixes, real ->set_speed and a pseudo-gpio driver   Rasmus Villemoes
• [PATCH 0/2] mmc: t210: fix autocal and 400KHz clock   twarren at nvidia.com
• [PATCH 1/2] mmc: t210: Add autocal and tap/trim updates for SDMMC1/3   twarren at nvidia.com
• [PATCH 2/2] mmc: t210: Fix 'bad' SD-card clock when doing 400KHz card detect   twarren at nvidia.com
• [PATCH v2 23/23] test/py: Allow using buildman to build U-Boot   Stephen Warren
• [PATCH 01/12] net: smc911x: Remove pkt_data_{push,pull}   Joe Hershberger
• [PATCH 02/12] net: smc911x: Replace malloc()+memset() with calloc()   Joe Hershberger
• [PATCH 05/12] net: smc911x: Fix potential memleak() in init fail path   Joe Hershberger
• [PATCH 06/12] net: smc911x: Inline all functions from header file   Joe Hershberger
• [PATCH 07/12] net: smc911x: Drop weak alias from 32bit accessors   Joe Hershberger
• [PATCH 08/12] net: smc911x: Convert IO accessors to {read, write}{w, l}()   Joe Hershberger
• [PATCH 09/12] net: smc911x: Pass around driver private data   Joe Hershberger
• fdtdec: what is the purpose of the compat_names array   Rasmus Villemoes
• [RFC 00/14] efi_loader: add capsule update support   AKASHI Takahiro
• [RFC 01/14] efi_loader: define OsIndicationsSupported flags   AKASHI Takahiro
• [RFC 02/14] efi_loader: define System Resource Table macros   AKASHI Takahiro
• [RFC 03/14] efi_loader: export a couple of protocol related functions   AKASHI Takahiro
• [RFC 04/14] efi_loader: correct a definition of struct efi_capsule_header   AKASHI Takahiro
• [RFC 05/14] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [RFC 06/14] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [RFC 07/14] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [RFC 08/14] efi_loader: capsule: support firmware update   AKASHI Takahiro
• [RFC 09/14] efi_loader: add simple firmware management protocol for FIT image   AKASHI Takahiro
• [RFC 10/14] efi_loader: capsule: support variable update   AKASHI Takahiro
• [RFC 11/14] efi_loader: variable: export variables table for runtime access   AKASHI Takahiro
• [RFC 12/14] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [RFC 13/14] tools: add mkeficapsule command for UEFI capsule update test   AKASHI Takahiro
• [RFC 14/14] test/py: add efi capsule test   AKASHI Takahiro
• travis build fails for all arm boards   Heiko Schocher
• [PATCH 1/4] i2c: Make deblock delay and SCL clock configurable   Heiko Schocher
• [PATCH 2/4] i2c: Export i2c_deblock_gpio_loop()   Heiko Schocher
• [PATCH 3/4] i2c: Add option to send start condition after deblocking   Heiko Schocher
• [PATCH 4/4] i2c: gpio: Run deblock sequence on probe   Heiko Schocher
• [PATCH] doc: i2c: gpio: Document deblock sequence on probe   Heiko Schocher
• [PATCH 1/2] dm: i2c-gpio: rework gpio get/set functions   Heiko Schocher
• [PATCH 2/2] dm: i2c-gpio: add support for clock stretching   Heiko Schocher
• [PATCH 1/4] i2c: designware_i2c: Fix IC_CON register setting for high speed mode   Heiko Schocher
• [PATCH 2/4] i2c: designware_i2c: check is high speed possible support   Heiko Schocher
• [PATCH 3/4] i2c: designware_i2c: remove 'has_high_speed'   Heiko Schocher
• [PATCH 4/4] i2c: designware_i2c: add 'hs_hcnt' and 'hs_lcnt' for high speed   Heiko Schocher
• [PATCH 1/2] misc: i2c_eeprom: remove pagewidth field from i2c_eeprom   Heiko Schocher
• [PATCH 2/2] misc: i2c_eeprom: store pagesize instead of pagewidth in i2c_eeprom_drv_data   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c/next   Heiko Schocher
• [PATCH 00/12] net: smc911x: Convert to DM   Masahiro Yamada
• [PATCH 02/12] net: smc911x: Replace malloc()+memset() with calloc()   Masahiro Yamada
• [PATCH 05/12] net: smc911x: Fix potential memleak() in init fail path   Masahiro Yamada
• [PATCH 06/12] net: smc911x: Inline all functions from header file   Masahiro Yamada
• [PATCH 07/12] net: smc911x: Drop weak alias from 32bit accessors   Masahiro Yamada
• [PATCH 10/12] net: smc911x: Clean up the status handling in smc911x_recv()   Masahiro Yamada
• [tiU20.01 PATCH] configs: am65x_evm_a53: Re order the overlay files   Lokesh Vutla
• [PATCH 07/12] net: smc911x: Drop weak alias from 32bit accessors   Masahiro Yamada
• [tiU20.01 PATCH] configs: am65x_evm_a53: Re order the overlay files   Lokesh Vutla
• Please pull u-boot-marvell/master (watchdog related)   Stefan Roese
• [PATCH 12/12] net: smc911x: Add DM support   Masahiro Yamada
• [RFC 01/14] efi_loader: define OsIndicationsSupported flags   Heinrich Schuchardt
• [RFC 02/14] efi_loader: define System Resource Table macros   Heinrich Schuchardt
• [RFC 03/14] efi_loader: export a couple of protocol related functions   Heinrich Schuchardt
• [RFC 04/14] efi_loader: correct a definition of struct efi_capsule_header   Heinrich Schuchardt
• [PATCH 3/3] watchdog: honour hw_margin_ms DT property   Stefan Roese
• [RFC 11/14] efi_loader: variable: export variables table for runtime access   Heinrich Schuchardt
• [PATCH v5 10/14] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [RFC 00/14] efi_loader: add capsule update support   Heinrich Schuchardt
• [RFC 13/14] tools: add mkeficapsule command for UEFI capsule update test   Heinrich Schuchardt
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [PATCH v5 10/14] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v3 1/1] cmd: bootefi: Parse reserved-memory node from DT   Patrick DELAUNAY
• [GIT PULL] TI changes for next branch targeting v2020.07   Lokesh Vutla
• [RFC 07/14] efi_loader: capsule: add memory range capsule definitions   Heinrich Schuchardt
• [PATCH v3 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig   Alexandru Marginean
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Pragnesh Patel
• [PATCH v3 0/6] Introduce DSA Ethernet switch class and Felix driver   Alexandru Marginean
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Wolfgang Denk
• [PATCH v3 1/1] cmd: bootefi: Parse reserved-memory node from DT   Heinrich Schuchardt
• [EXT] Re: [Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Kuldeep Singh
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Rasmus Villemoes
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Wolfgang Denk
• [PATCH v5 06/14] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v5 06/14] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Rasmus Villemoes
• [PATCH] Revert "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing"   Petr Štetiar
• [PATCH] Revert "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing"   Tom Rini
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Christophe Leroy
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Rasmus Villemoes
• [PATCH] Revert "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing"   André Przywara
• [PATCH] Revert "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing"   Petr Štetiar
• [PATCH 0/3] cmd: add driver, fs and part type listing commands   Niel Fourie
• [PATCH 1/3] cmd: part: Add subcommand to list supported partition tables   Niel Fourie
• [PATCH 2/3] cmd: fs: Add command to list supported fs types   Niel Fourie
• [PATCH 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Niel Fourie
• [PATCH v5 14/14] doc: update FU540 RISC-V documentation   Pragnesh Patel
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Wolfgang Denk
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Wolfgang Denk
• [PATCH v5 11/14] configs: fu540: Add config options for U-boot SPL   Pragnesh Patel
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Rasmus Villemoes
• [PATCH] Revert "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing"   Tom Rini
• [PATCH] fixdep: fix U-Boot own code to handle only valid symbol characters   Tom Rini
• [PATCH] global_data.h: make <asm-generic/global_data.h> self-contained   Tom Rini
• [PATCH] asm-generic/u-boot.h: make <asm-generic/u-boot.h> self-contained   Tom Rini
• [PATCH] debug_uart.h: make <debug_uart.h> self-contained   Tom Rini
• [PATCH] mmc: make <mmc.h> self-contained   Tom Rini
• [PATCH] spl.h: make <spl.h> self-contained   Tom Rini
• [PATCHv2 1/4] kbuild: fixdep: Resync this with v4.17   Tom Rini
• [PATCHv2 2/4] kbuild: Re-sync DTC flag logic with v4.17   Tom Rini
• [PATCHv2 3/4] scripts/Makefile.lib: Restore PCI related warnings to DTC_FLAGS   Tom Rini
• [PATCHv2 4/4] scripts/Makefile.lib: Re-add -Wno-simple_bus_reg to DTC_FLAGS   Tom Rini
• [PATCH] kbuild: remove unused dtc-version.sh script   Tom Rini
• [PATCHv2 1/8] spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries   Tom Rini
• [PATCHv2 2/8] Kconfig: Remove redundant variable sets   Tom Rini
• [PATCHv2 3/8] edminiv2: Move CONFIG_SPL_LDSCRIPT to defconfig   Tom Rini
• [PATCHv2 4/8] mach-davinci: Hard-code the default SPL_LDSCRIPT path   Tom Rini
• [PATCHv2 5/8] Azure / GitLab / Travis: Add Kconfig unit tests to a job   Tom Rini
• [PATCHv2 6/8] scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc   Tom Rini
• [PATCHv2 7/8] kconfig / kbuild: re-sync with Linux 4.18   Tom Rini
• [PATCHv2 8/8] configs: Drop '$(ARCH)' usage in CONFIG_SPL_LDSCRIPT   Tom Rini
• [PATCH 2/7] mx31pdk: Move CONFIG_SPL_LDSCRIPT to defconfig   Tom Rini
• [PATCH] ram: px30: drop non informative debug message   Miquel Raynal
• [PATCH v2 1/2] timer: sti: convert to livetree   Patrice CHOTARD
• [PATCH v2 2/2] timer: sti: use clk API to get timer clock rate   Patrice CHOTARD
• [PATCH v5 07/14] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v5 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• Append an environment variable: 'env append'   Palacios, Hector
• [PATCH v2 06/23] buildman: Allow ignoring warnings in the return code   Simon Glass
• [PATCH v2 19/23] travis/gitlab/azure: Drop the -E flag   Simon Glass
• [PATCH 0/3] cmd: add driver, fs and part type listing commands   Simon Glass
• fdtdec: what is the purpose of the compat_names array   Simon Glass
• [PATCH v2 19/23] travis/gitlab/azure: Drop the -E flag   Tom Rini
• [PATCH] Revert "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing"   Tom Rini
• [PATCH v2 14/23] travis/gitlab/azure: Drop BUILDMAN variable with test.py   Simon Glass
• [PATCH v2 19/23] travis/gitlab/azure: Drop the -E flag   Simon Glass
• [PATCH v2 14/23] travis/gitlab/azure: Drop BUILDMAN variable with test.py   Tom Rini
• [PATCH v2 19/23] travis/gitlab/azure: Drop the -E flag   Tom Rini
• [PATCH v5 05/14] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v5 04/14] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v2] bootcount_ext: Add flag to enable/disable bootcount   Frédéric Danis
• [PATCH 0/2] qspi: t210: fix claim_bus and clock/tap delays   twarren at nvidia.com
• [PATCH 1/2] qspi: t210: Fix claim_bus's use of the wrong bus/device   twarren at nvidia.com
• [PATCH 2/2] qspi: t210: Fix QSPI clock and tap delays   twarren at nvidia.com
• [PATCH 10/12] net: smc911x: Clean up the status handling in smc911x_recv()   Joe Hershberger
• [PATCH v2 0/2] Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH 11/12] net: smc911x: Split non-DM specific bits from common code   Joe Hershberger
• [PATCH 1/5] ARM: tegra: rework fdt_serial_tag_setup_one   Stephen Warren
• [PATCH 1/5] ARM: tegra: rework fdt_serial_tag_setup_one   Stephen Warren
• [PATCH 12/12] net: smc911x: Add DM support   Joe Hershberger
• [PATCH 2/5] t210: do not enable PLLE and UPHY PLL HW PWRSEQ   Stephen Warren
• [PATCH 3/5] ARM: tegra: p2771-0000: enable PIE relocation   Stephen Warren
• [PATCH v5 01/14] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH 4/5] fdt: Fix 'system' command   Stephen Warren
• [PATCH v5 02/14] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH 5/5] ARM: Tegra: Use calc env var feature on all boards   Stephen Warren
• [PATCH 1/5] ARM: tegra: rework fdt_serial_tag_setup_one   Tom Warren
• [PATCH 2/5] t210: do not enable PLLE and UPHY PLL HW PWRSEQ   Tom Warren
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Joe Hershberger
• [PATCH 4/5] fdt: Fix 'system' command   Tom Warren
• [PATCH v5 09/14] clk: sifive: fu540-prci: Add clock initialization for SPL   Pragnesh Patel
• [PATCH 5/5] ARM: Tegra: Use calc env var feature on all boards   Tom Warren
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Masahiro Yamada
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Marek Vasut
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Tom Rini
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Marek Vasut
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Tom Rini
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Marek Vasut
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Tom Rini
• [PATCH 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Sean Anderson
• [PATCH 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Joe Hershberger
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Marek Vasut
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Tom Rini
• [PATCH v6 04/19] clk: Add functions to register CCF clock structs   Sean Anderson
• [PATCH v6 13/19] riscv: Fix race conditions when initializing IPI   Sean Anderson
• [PATCH 1/5] ARM: tegra: rework fdt_serial_tag_setup_one   Tom Warren
• [PATCH v2 1/2] cmd: Add command to display or save Linux PStore dumps   Heinrich Schuchardt
• [PATCH 0/2] net: tegra: Misc network fixes   twarren at nvidia.com
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   twarren at nvidia.com
• [PATCH 2/2] tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all boards   twarren at nvidia.com
• [PATCH] powerpc: remove WATCHDOG_RESET call from wait_ticks()   Wolfgang Denk
• [PATCH v3 0/5] DT related fixes for RISC-V UEFI   Atish Patra
• [PATCH v3 1/5] riscv: Add boot hartid to Device tree   Atish Patra
• [PATCH v3 2/5] cmd: bootefi: Parse reserved-memory node from DT   Atish Patra
• [PATCH v3 3/5] riscv: Provide a mechanism to fix DT for reserved memory   Atish Patra
• [PATCH v3 4/5] riscv: Setup reserved-memory node for FU540   Atish Patra
• [PATCH v3 5/5] riscv: Copy the reserved-memory nodes to final DT   Atish Patra
• [PATCH] t210: pinmux: Remove pinmux/GPIO init from T210 boards   twarren at nvidia.com
• [PATCH v3 2/5] cmd: bootefi: Parse reserved-memory node from DT   Heinrich Schuchardt
• [PATCH 02/14] drivers: net: ldpaa: add support for probing based on the DTS   Joe Hershberger
• [PATCH 1/2] mmc: t210: Add autocal and tap/trim updates for SDMMC1/3   Jaehoon Chung
• [PATCH v2 0/3] Support SDMA mode on RPI4 target - 32bit   Jaehoon Chung
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Tom Rini
• [PATCH v2 0/3] Support SDMA mode on RPI4 target - 32bit   Peng Fan
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Joe Hershberger
• [PATCH] [RFC] net: smc911x: Drop the standalone EEPROM example   Marek Vasut
• [RFC 01/14] efi_loader: define OsIndicationsSupported flags   AKASHI Takahiro
• [RFC 07/14] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [RFC 13/14] tools: add mkeficapsule command for UEFI capsule update test   AKASHI Takahiro
• [PATCH 2/5] t210: do not enable PLLE and UPHY PLL HW PWRSEQ   JC Kuo
• Re: [PATCH 1/4] ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• Re: [PATCH 2/4] elgin-rv1108: Use rk_board_late_init() for GPIO settings【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• Re: [PATCH 3/4] elgin-rv1108: Avoid adc_channel_single_shot error【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [PATCH 4/4] rv1108: Fix boot regression   Kever Yang
• [RFC 11/14] efi_loader: variable: export variables table for runtime access   AKASHI Takahiro
• [RFC 00/14] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH] ram: px30: drop non informative debug message   Kever Yang
• [PATCH v2] bootcount_ext: Add flag to enable/disable bootcount   Simon Glass
• U-CLASS SPI Bus and Devices   Rudolf J Streif
• [PATCH v5 12/14] riscv: sifive: fu540: enable all cache ways from u-boot proper   Rick Chen
• [PATCH] include/configs: ls1012afrwy: delete duplicate environment variable BOOT_TARGET_DEVICES   Biwen Li
• [PATCH v2 0/3] Support SDMA mode on RPI4 target - 32bit   Jaehoon Chung
• [v2, PATCH] include/configs: ls1012afrwy: support dhcp boot   Biwen Li
• [Patch v3 1/2] configs: ls2080ardb: Make MC_INIT access flash memory as per spi-mem   Kuldeep Singh
• [Patch v3 2/2] configs: ls2080ardb: Make BOOT command access flash memory as per spi-mem   Kuldeep Singh
• [RFC 07/14] efi_loader: capsule: add memory range capsule definitions   Heinrich Schuchardt
• [RFC 07/14] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
• [RFC 09/14] efi_loader: add simple firmware management protocol for FIT image   Heinrich Schuchardt
• [RFC 09/14] efi_loader: add simple firmware management protocol for FIT image   AKASHI Takahiro
• [PATCH v2] bootcount_ext: Add flag to enable/disable bootcount   Frédéric Danis
• [PATCH 00/11] stm32mp1: migrate MTD and DFU configuration in Kconfig   Patrick Delaunay
• [PATCH 01/11] board: stm32mp1: move board_get_mtdparts in st common directory   Patrick Delaunay
• [PATCH 02/11] board: stm32mp1: move set_dfu_alt_info in st common directory   Patrick Delaunay
• [PATCH 03/11] stm32mp1: dynamically build DFU_ALT_INFO   Patrick Delaunay
• [PATCH 04/11] stm32mp1: move MTDPART configuration in Kconfig   Patrick Delaunay
• [PATCH 05/11] board: stm32mp1: reserve memory for OP-TEE in device tree   Patrick Delaunay
• [PATCH 06/11] stm32mp1: dynamically detect op-tee presence   Patrick Delaunay
• [PATCH 07/11] board: stm32mp1: use FDT address provided by TF-A at boot time   Patrick Delaunay
• [PATCH 08/11] configs: stm32mp1: remove optee defconfig   Patrick Delaunay
• [PATCH 09/11] board: stm32mp1: support boot from spi-nand   Patrick Delaunay
• [PATCH 10/11] board: stm32mp1: adapt MTD partition for BOOT from NOR or NAND   Patrick Delaunay
• [PATCH 11/11] doc: stm32mp1: update DFU support example   Patrick Delaunay
• [PATCH 00/18] stm32mp1: add command stm32prog   Patrick Delaunay
• [PATCH 01/18] usb: gadget: g_dnl: add function g_dnl_set_product   Patrick Delaunay
• [PATCH 02/18] dfu: add prototype for dfu_transaction_initiate/cleanup   Patrick Delaunay
• [PATCH 03/18] stm32mp: add function get_cpu_dev   Patrick Delaunay
• [PATCH 04/18] stm32mp: add the command stm32prog   Patrick Delaunay
• [PATCH 05/18] stm32mp: stm32prog: add flash layout parsing   Patrick Delaunay
• [PATCH 06/18] stm32mp: stm32prog: add MMC device   Patrick Delaunay
• [PATCH 07/18] stm32mp: stm32prog: add support of boot partition for eMMC device   Patrick Delaunay
• [PATCH 08/18] stm32mp: stm32prog: add upport of partial update   Patrick Delaunay
• [PATCH 09/18] stm32mp: stm32prog: add MTD devices support   Patrick Delaunay
• [PATCH 10/18] stm32mp: stm32prog: adapt the MTD partitions   Patrick Delaunay
• [PATCH 11/18] stm32mp: stm32prog: add support of ssbl copy   Patrick Delaunay
• [PATCH 12/18] stm32mp: stm32prog: add support for delete option in flashlayout   Patrick Delaunay
• [PATCH 13/18] stm32mp: stm32prog: add otp update support   Patrick Delaunay
• [PATCH 14/18] stm32mp: stm32prog: add pmic NVM update support   Patrick Delaunay
• [PATCH 15/18] stm32mp: stm32prog: add serial link support   Patrick Delaunay
• [PATCH 16/18] stm32mp: stm32prog: enable videoconsole   Patrick Delaunay
• [PATCH 17/18] stm32mp: stm32prog: support for script   Patrick Delaunay
• [PATCH 18/18] stm32mp: stm32prog: add support of RAM target   Patrick Delaunay
• Switching among serial consoles   Michal Simek
• [RFC 06/14] efi_loader: capsule: add capsule_on_disk support   Heinrich Schuchardt
• [RFC 09/14] efi_loader: add simple firmware management protocol for FIT image   Heinrich Schuchardt
• [PATCH v2 2/4] cmd: bootefi: Parse reserved-memory node from DT   Atish Patra
• [PATCH 1/2] clk: stm32mp1: correct CKSELR masks   Patrice CHOTARD
• [PATCH 2/2] clk: stm32mp1: add SPI5_K support   Patrice CHOTARD
• Pull request for UEFI sub-system for efi-2020-04-rc4 (4)   Heinrich Schuchardt
• [Uboot-stm32] [PATCH v2] ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1   Patrice CHOTARD
• [PATCH 1/9] ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR   Patrice CHOTARD
• [PATCH 2/9] ram: stm32mp1: display result for software read DQS gating   Patrice CHOTARD
• [PATCH 3/9] ram: stm32mp1: don't display the prompt two times   Patrice CHOTARD
• [PATCH 4/9] ram: stm32mp1: tuning: add timeout for polling BISTGSR.BDDONE   Patrice CHOTARD
• [PATCH 5/9] ram: stm32mp1: tuning: deactivate derating during BIST test   Patrice CHOTARD
• [PATCH 1/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH 2/5] roc-rk3399-pc: Configure the leds only during POR   Jagan Teki
• [PATCH 3/5] rockchip: tpl: Move board_early_init_f after cpu timer   Jagan Teki
• [PATCH 4/5] rockchip: tpl: Print TPL banner at end-of board_init_f   Jagan Teki
• [PATCH 5/5] rockchip: spl: Move board_early_init_f after cpu timer   Jagan Teki
• [PATCH 6/9] ram: stm32mp1: update BIST config for tuning   Patrice CHOTARD
• [PATCH 7/9] ram: stm32mp1_ddr: fix self refresh disable during DQS training   Patrice CHOTARD
• [PATCH 8/9] ram: stm32mp1: reduce delay after BIST reset for tuning   Patrice CHOTARD
• [PATCH 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Wolfgang Denk
• [PATCH 1/2] net: dwc_eth_qos: implement reset-gpios for stm32   Patrick Delaunay
• [PATCH 2/2] net: dwc_eth_qos: implement phy reg and max-speed for stm32   Patrick Delaunay
• [PATCH 9/9] ram: stm32mp1: the property st,phy-cal becomes optional   Patrice CHOTARD
• [PATCH] i2c: stm32f7_i2c: allows for any bus frequency   Patrice CHOTARD
• [RFC PATCH 0/9] produce working binaries by default   Petr Štetiar
• [RFC PATCH 1/9] Kconfig: add config options for automatic builds   Petr Štetiar
• [RFC PATCH 2/9] Makefile: export config options for automatic builds   Petr Štetiar
• [RFC PATCH 3/9] mksunxi_fit_atf.sh: produce working binaries by default   Petr Štetiar
• [RFC PATCH 4/9] make_fit_atf.py: produce working binaries by default   Petr Štetiar
• [RFC PATCH 5/9] fit_spl_optee.sh: produce working binaries by default   Petr Štetiar
• [RFC PATCH 6/9] mkimage_fit_atf.sh: produce working binaries by default   Petr Štetiar
• [RFC PATCH 7/9] fit_spl_atf.sh: produce working binaries by default   Petr Štetiar
• [RFC PATCH 8/9] k3_fit_atf.sh: produce working binaries by default   Petr Štetiar
• [RFC PATCH 9/9] mkimage_fit_opensbi.sh: produce working binaries by default   Petr Štetiar
• [PATCH] stm32mp: psci: set cntfrq register of cpu on   Patrice CHOTARD
• [PATCH] stm32mp1: add 800 MHz profile support   Patrice CHOTARD
• [Uboot-stm32] [PATCH 01/10] board: stm32mp1: update command stboard on misc_write result   Patrice CHOTARD
• [PATCH 03/10] arm: stm32mp: bsec: remove unneeded test   Patrice CHOTARD
• [Uboot-stm32] [PATCH 02/10] board: stm32mp1: read OTP in command stboard   Patrice CHOTARD
• [PATCH 04/10] arm: stm32mp: bsec: add permanent lock support in bsec driver   Patrice CHOTARD
• [Uboot-stm32] [PATCH 05/10] board: stm32mp1: stboard: lock the OTP after programming   Patrice CHOTARD
• [RFC PATCH 3/9] mksunxi_fit_atf.sh: produce working binaries by default   Harald Seiler
• [PATCH 06/10] arm: stm32mp: improve the error message for smc   Patrice CHOTARD
• Pull request: u-boot-sunxi/master   Jagan Teki
• [Uboot-stm32] [PATCH 07/10] board: stm32mp1: add finished good in board identifier OTP   Patrice CHOTARD
• [Uboot-stm32] [PATCH 08/10] board: stm32mp1: display reference only for STMicroelectronics board   Patrice CHOTARD
• [PATCH 09/10] arm: stm32mp: add function get_soc_name   Patrice CHOTARD
• [PATCH 10/10] arm: stm32mp: fdt: update kernel device tree according the part number   Patrice CHOTARD
• [PATCH v3 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Jagan Teki
• [Patch v3 1/2] configs: ls2080ardb: Make MC_INIT access flash memory as per spi-mem   Priyanka Jain (OSS)
• [Patch v3 2/2] configs: ls2080ardb: Make BOOT command access flash memory as per spi-mem   Priyanka Jain (OSS)
• [v2, PATCH] include/configs: ls1012afrwy: support dhcp boot   Priyanka Jain (OSS)
• [PATCH] include/configs: ls1012afrwy: delete duplicate environment variable BOOT_TARGET_DEVICES   Priyanka Jain (OSS)
• [v2, PATCH] include/configs: ls1012aqds: add default environment variable   Priyanka Jain (OSS)
• [PATCH 07/10] board: stm32mp1: add finished good in board identifier OTP   Wolfgang Denk
• [PATCH] configs: ls1021a: Append othbootargs to bootargs   Priyanka Jain (OSS)
• [RESEND Patch v2] configs: lx2160a: Enable FSPI support   Priyanka Jain (OSS)
• [Patch v3 1/3] mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu*   Priyanka Jain (OSS)
• [Patch v3 2/2] configs: ls2080ardb: Make BOOT command access flash memory as per spi-mem   Kuldeep Singh
• [RESEND Patch v2] configs: lx2160a: Enable FSPI support   Kuldeep Singh
• [PATCH 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Priyanka Jain (OSS)
• [PATCH] lx2160a: Add dhcp in boot_targets   Priyanka Jain (OSS)
• [PATCH] armv8: ls1028a: add dhcp boot target device   Priyanka Jain (OSS)
• [PATCH 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Ioana Ciornei
• [RESEND Patch v2] configs: lx2160a: Enable FSPI support   Kuldeep Singh
• [PATCH 02/14] drivers: net: ldpaa: add support for probing based on the DTS   Ioana Ciornei
• [PATCH] condfigs: ls1046aqds: support distro boot   Biwen Li
• [PATCH] dlmalloc: Add an option to default malloc to init   marek.bykowski at gmail.com
• [PATCH 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Niel Fourie
• [PATCH 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Niel Fourie
• [PATCH v2 0/5] sunxi: SPL SPI booting: Enable R40 and H6 SoCs   Jagan Teki
• [PATCH 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Ioana Ciornei
• [PATCH 0/2] sunxi: clean up defconfig files   Jagan Teki
• [PATCH 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Tom Rini
• [PATCH] configs: a64-olinuxino-emmc: add eMMC boot part config commands   Petr Štetiar
• [RFC 11/14] efi_loader: variable: export variables table for runtime access   Sughosh Ganu
• [U-Boot] Please pull from u-boot-i2c/next   Tom Rini
• [GIT PULL] TI changes for next branch targeting v2020.07   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• Pull request for UEFI sub-system for efi-2020-04-rc4 (4)   Tom Rini
• Pull request: u-boot-sunxi/master   Tom Rini
• [PATCH 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Priyanka Jain (OSS)
• [RFC 08/14] efi_loader: capsule: support firmware update   Sughosh Ganu
• [PATCH] image-fit: Allow loading FIT image for VxWorks   Bin Meng
• [RFC RFT PATCH] env: spl: filter the variables in default environment of SPL or TPL   Patrick Delaunay
• [PATCH v2 00/14] net: ldpaa_eth: transition to CONFIG_DM_ETH   Ioana Ciornei
• [PATCH v2 01/14] drivers: net: add Layerscape mEMAC MDIO driver   Ioana Ciornei
• [PATCH v2 02/14] drivers: net: ldpaa: add support for probing based on the DTS   Ioana Ciornei
• [PATCH v2 03/14] drivers: net: fsl-mc: add support for CONFIG_DM_ETH   Ioana Ciornei
• [PATCH v2 04/14] board: ls1088ardb: transition to DM_ETH   Ioana Ciornei
• [PATCH v2 05/14] board: ls2088ardb: transition to DM_ETH   Ioana Ciornei
• [PATCH v2 06/14] arm: dts: lx2160a: add external MDIO nodes   Ioana Ciornei
• [PATCH v2 07/14] arm: dts: ls2088a: add external MDIO nodes   Ioana Ciornei
• [PATCH v2 08/14] arm: dts: ls1088a: add external MDIO nodes   Ioana Ciornei
• [PATCH v2 09/14] arm: dts: lx2160ardb: add DPMAC and PHY nodes   Ioana Ciornei
• [PATCH v2 10/14] arm: dts: ls2088ardb: add DPMAC and PHY nodes   Ioana Ciornei
• [PATCH v2 11/14] arm: dts: ls1088ardb: add DPMAC and PHY nodes   Ioana Ciornei
• [PATCH v2 12/14] configs: ls1088ardb: enable CONFIG_DM_ETH and related   Ioana Ciornei
• [PATCH v2 13/14] configs: ls2088ardb: enable CONFIG_DM_ETH and related   Ioana Ciornei
• [PATCH v2 14/14] configs: lx2160ardb: enable CONFIG_DM_ETH and related   Ioana Ciornei
• [RFC RFT PATCH] env: spl: filter the variables in default environment of SPL or TPL   Wolfgang Denk
• [PATCH v5 00/17] Enable ARM Trusted Firmware for U-Boot   Ang, Chee Hong
• [RFC PATCH v2] cmd: mp: change the command name from cpu to mp   Bin Meng
• [PATCH v2] powerpc: allow opting out of WATCHDOG_RESET() from timer interrupt   Rasmus Villemoes
• [PATCH v3 00/23] gitlab: Simplify the test script   Simon Glass
• [PATCH v3 01/23] sandbox: Add documentation about required/useful packages   Simon Glass
• [PATCH v3 02/23] main: Drop show_boot_progress() prototype   Simon Glass
• [PATCH v3 03/23] buildman: Document the members of BuilderJob   Simon Glass
• [PATCH v3 04/23] bulidman: Add support for a simple build   Simon Glass
• [PATCH v3 05/23] buildman: Update help for -d   Simon Glass
• [PATCH v3 06/23] buildman: Allow ignoring warnings in the return code   Simon Glass
• [PATCH v3 07/23] buildman: Be more selective about which directories to remove   Simon Glass
• [PATCH v3 08/23] buildman: Allow building within a subdir of the current dir   Simon Glass
• [PATCH v3 09/23] buildman: Drop the -a option   Simon Glass
• [PATCH v3 10/23] travis: Don't copy files into .bm-work/   Simon Glass
• [PATCH v3 11/23] travis: Split the building into two parts   Simon Glass
• [PATCH v3 12/23] gitlab/azure: Use the -w option for sandbox_spl   Simon Glass
• [PATCH v3 13/23] travis/gitlab/azure: Use --board buildman flag with test.py   Simon Glass
• [PATCH v3 14/23] travis/gitlab/azure: Drop BUILDMAN variable with test.py   Simon Glass
• [PATCH v3 15/23] travis/gitlab/azure: Drop the buildman -d flag   Simon Glass
• [PATCH v3 16/23] gitlab/azure: Drop unnecessary if..fi when using test.py   Simon Glass
• [PATCH v3 17/23] gitlab/azure: Use -w flag for all test.py builds   Simon Glass
• [PATCH v3 18/23] travis/gitlab/azure: Use bash to avoid a_test_which_does_not_exist   Simon Glass
• [PATCH v3 19/23] travis/gitlab/azure: Use -W to avoid warnings check   Simon Glass
• [PATCH v3 20/23] travis/gitlab/azure: Enable test_handoff   Simon Glass
• [PATCH v3 21/23] travis/gitlab/azure: Simplify the exit code for test.py   Simon Glass
• [PATCH v3 22/23] travis/gitlab/azure: Drop repeated buildman call with test.py   Simon Glass
• [PATCH v3 23/23] test/py: Allow using buildman to build U-Boot   Simon Glass
• [RFC RFT PATCH] env: spl: filter the variables in default environment of SPL or TPL   Patrick DELAUNAY
• [PATCH v4 2/3] env: introduce macro ENV_IS_IN_SOMEWHERE   Patrick DELAUNAY
• [PATCH v4 3/3] env: Add CONFIG_ENV_FULL_SUPPORT   Patrick DELAUNAY
• Antwort: [PATCH v2 32/39] irq: Add a method to convert an interrupt to ACPI   Wolfgang Wallner
• Antwort: [PATCH v2 32/39] irq: Add a method to convert an interrupt to ACPI   Wolfgang Wallner
• [PATCH] rockchip: mkimage: Use an existing macro instead of a decimal value   Miquel Raynal
• [PATCH 1/2] mmc: t210: Add autocal and tap/trim updates for SDMMC1/3   Tom Warren
• U-CLASS SPI Bus and Devices   Rudolf J Streif
• Antwort: [PATCH v2 33/39] acpi: Add support for SSDT generation   Wolfgang Wallner
• [PATCH v2 00/14] vboot: Fix forged-configuration vulnerability   Simon Glass
• [PATCH v2 01/14] image: Correct comment for fit_conf_get_node()   Simon Glass
• [PATCH v2 02/14] image: Be a little more verbose when checking signatures   Simon Glass
• [PATCH v2 03/14] image: Return an error message from fit_config_verify_sig()   Simon Glass
• [PATCH v2 04/14] test: vboot: Drop unnecessary parameter for fit_check_sign   Simon Glass
• [PATCH v2 05/14] test: vboot: Add a test for a forged configuration   Simon Glass
• [PATCH v2 06/14] test: vboot: Parameterise the test   Simon Glass
• [PATCH v2 07/14] image: Check hash-nodes when checking configurations   Simon Glass
• [PATCH v2 08/14] image: Load the correct configuration in fit_check_sign   Simon Glass
• [PATCH v2 09/14] fit_check_sign: Allow selecting the configuration to verify   Simon Glass
• [PATCH v2 10/14] test: vboot: Tidy up the code a little   Simon Glass
• [PATCH v2 11/14] test: vboot: Fix pylint errors   Simon Glass
• [PATCH v2 12/14] image: Use constants for 'required' and 'key-name-hint'   Simon Glass
• [PATCH v2 13/14] test: vboot: Move key creation into a function   Simon Glass
• [PATCH v2 14/14] test: vboot: Reduce fake kernel size to 500 bytes   Simon Glass
• [PATCH v2 1/2] cmd: Add command to display or save Linux PStore dumps   Frédéric Danis
• [RFC 01/14] efi_loader: define OsIndicationsSupported flags   Heinrich Schuchardt
• [RFC 02/14] efi_loader: define System Resource Table macros   Heinrich Schuchardt
• [RFC 03/14] efi_loader: export a couple of protocol related functions   Heinrich Schuchardt
• [RFC 04/14] efi_loader: correct a definition of struct efi_capsule_header   Heinrich Schuchardt
• [RFC 00/14] efi_loader: add capsule update support   Sughosh Ganu
• [PATCH v3 2/5] cmd: bootefi: Parse reserved-memory node from DT   Heinrich Schuchardt
• [PATCH v6 00/12] Actions S700 SoC support   Amit Singh Tomar
• [PATCH v6 01/12] arm: actions: Add common framework for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH v6 02/12] arm: actions: rename sysmap-s900 to sysmap-owl   Amit Singh Tomar
• [PATCH v6 03/12] serial: actions: add compatible string   Amit Singh Tomar
• [PATCH v6 04/12] arm: dts: sync dts for Action Semi S900   Amit Singh Tomar
• [PATCH v6 05/12] arm: dts: actions: s900: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v6 06/12] clk: actions: Add common clock driver   Amit Singh Tomar
• [PATCH v6 07/12] arm: actions: add S700 SoC device tree   Amit Singh Tomar
• [PATCH v6 08/12] arm: dts: actions: s700: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v6 09/12] arm: add support Actions Semi S700   Amit Singh Tomar
• [PATCH v6 10/12] actions: Move defconfig options to Kconfig   Amit Singh Tomar
• [PATCH v6 11/12] arm: add Cubieboard7 board support   Amit Singh Tomar
• [PATCH v6 12/12] doc: boards: add Cubieboard7 documentation   Amit Singh Tomar
• [PATCH v2 12/14] image: Use constants for 'required' and 'key-name-hint'   Philippe REYNES
• [PATCH] menu: add support for client defined statusline function   Thirupathaiah Annapureddy
• [PATCH v3 2/5] cmd: bootefi: Parse reserved-memory node from DT   Atish Patra
• [PATCH 1/1] efi_loader: create reservations after ft_board_setup   Atish Patra
• [PATCH 1/2 v2] mmc: t210: Add autocal and tap/trim updates for SDMMC1/3   twarren at nvidia.com
• [PATCH] ARM: tegra: p2371-2180: add I2C nodes to DT   twarren at nvidia.com
• [PATCH] t210: pinmux: Remove pinmux/GPIO init from T210 boards   Stephen Warren
• [PATCH] ARM: tegra: p2371-2180: add I2C nodes to DT   Stephen Warren
• [PATCH 2/5] t210: do not enable PLLE and UPHY PLL HW PWRSEQ   Stephen Warren
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   Stephen Warren
• [PATCH 2/2] tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all boards   Stephen Warren
• [PATCH] t210: pinmux: Remove pinmux/GPIO init from T210 boards   Tom Warren
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   Tom Warren
• [PATCH 2/2] tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all boards   Tom Warren
• [PATCH v2 0/8] Cortina Access Drivers Package 2   Alex Nemirovsky
• [PATCH v2 0/8] Cortina Access Drivers Package 2   Alex Nemirovsky
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v2 2/8] board: presidio-asic: Add eMMC board support   Alex Nemirovsky
• [PATCH v2 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v2 4/8] board: presidio-asic: Add I2C support   Alex Nemirovsky
• [PATCH v2 5/8] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
• [PATCH v2 6/8] board: presidio: add LED support   Alex Nemirovsky
• [PATCH v2 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v2 8/8] board: presidio-asic: Add SPI NAND and NOR support   Alex Nemirovsky
• [PATCH 2/2] tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all boards   Stephen Warren
• [PATCH v3 1/5] riscv: Add boot hartid to Device tree   Bin Meng
• [PATCH v3 1/5] riscv: Add boot hartid to Device tree   Bin Meng
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Jaehoon Chung
• [PATCH 1/1] efi_loader: create reservations after ft_board_setup   Heinrich Schuchardt
• [PATCH 00/12] fsl: layerscape: Initialize the GIC redistributor   Zhiqiang Hou
• [PATCH 01/12] board: lx2160a: Add header file cpu_func.h   Zhiqiang Hou
• [PATCH 02/12] arm64: fsl-layerscape: Assign addr to resv_ram if enabled RESV_RAM config   Zhiqiang Hou
• [PATCH 03/12] arm64: layerscape: Move the GIC tables reserve memory function to soc.c   Zhiqiang Hou
• [PATCH 04/12] board: lx2160a: Don't program the GIC RD tables if failed to reserve memory   Zhiqiang Hou
• [PATCH 05/12] board: lx2160a: Make sure the RD tables address align to 64KB   Zhiqiang Hou
• [PATCH 06/12] fsl-layerscape: Kconfig: Select RESV_RAM config if GIC_V3_ITS is enabled   Zhiqiang Hou
• [PATCH 07/12] board: fsl: ls1088a: Initialize the GIC redistributor tables   Zhiqiang Hou
• [PATCH 08/12] configs: ls1088a: Enable GIC_V3_ITS config   Zhiqiang Hou
• [PATCH 09/12] board: fsl: ls1028a: Initialize the GIC redistributor tables   Zhiqiang Hou
• [PATCH 10/12] configs: ls1028a: Enable GIC_V3_ITS config   Zhiqiang Hou
• [PATCH 11/12] board: fsl: ls2080a: Initialize the GIC redistributor tables   Zhiqiang Hou
• [PATCH 12/12] configs: ls208xa: Enable GIC_V3_ITS config   Zhiqiang Hou
• [PATCH] board: fsl: lx2160a: fix SDHC1_DAT4 signal routing   Yangbo Lu
• [PATCH] configs: disable eMMC HS200 support on layerscape platforms   Y.b. Lu
• Antwort: [PATCH v2 33/39] acpi: Add support for SSDT generation   Wolfgang Wallner
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   Thierry Reding
• [PATCH v3] arm: imx6: configure NoC on i.MX6DQP   Filip Brozović
• [PATCH 1/4] board: freescale: ls1028a: mux changes for lpuart   andy.tang at nxp.com
• [PATCH 2/4] arm: dts: ls1028a: add lpuart nodes   andy.tang at nxp.com
• [PATCH 3/4] armv8: ls1028aqds: add lpuart dts support   andy.tang at nxp.com
• [PATCH 4/4] configs: ls1028aqds: add lpuart config   andy.tang at nxp.com
• [RFC 13/14] tools: add mkeficapsule command for UEFI capsule update test   Ilias Apalodimas
• [PATCH 07/10] board: stm32mp1: add finished good in board identifier OTP   Patrick DELAUNAY
• [PATCH] configs: disable eMMC HS200 support on layerscape platforms   Jaehoon Chung
• [PATCH v2] powerpc: allow opting out of WATCHDOG_RESET() from timer interrupt   Wolfgang Denk
• [PATCH 07/10] board: stm32mp1: add finished good in board identifier OTP   Wolfgang Denk
• [PATCH] configs: disable eMMC HS200 support on layerscape platforms   Y.b. Lu
• [2/5] roc-rk3399-pc: Configure the leds only during POR   sunil at amarulasolutions.com
• [PATCH v2 1/2] timer: sti: convert to livetree   Patrick DELAUNAY
• [PATCH v2 2/2] timer: sti: use clk API to get timer clock rate   Patrick DELAUNAY
• [RFC 11/14] efi_loader: variable: export variables table for runtime access   Ilias Apalodimas
• [PATCH 1/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL   Patrick Delaunay
• [PATCH 2/3] env: mmc: correct the offset returned by mmc_offset_try_partition   Patrick Delaunay
• [PATCH 3/3] env: mmc: add redundancy support in mmc_offset_try_partition   Patrick Delaunay
• [PATCH] configs: ls2088ardb: Correct DEFAULT_DEVICE_TREE value   Kuldeep Singh
• [PATCH v2 1/5] rockchip: Separate the reset cause from display cpuinfo   Jagan Teki
• [PATCH v2 2/5] roc-rk3399-pc: Set low power leds, power key only if POR   Jagan Teki
• [PATCH v2 3/5] rockchip: tpl: Move board_early_init_f after cpu timer   Jagan Teki
• [PATCH v2 4/5] rockchip: tpl: Print TPL banner at end-of board_init_f   Jagan Teki
• [PATCH v2 5/5] rockchip: spl: Move board_early_init_f after cpu timer   Jagan Teki
• [PATCH v2 0/8] Cortina Access Drivers Package 2   Daniel Schwierzeck
• [PATCH 1/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC   Patrick Delaunay
• [PATCH 2/3] stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent   Patrick Delaunay
• [PATCH 3/3] configs:stm32mp1: activate env config in SPL   Patrick Delaunay
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Vignesh Raghavendra
• [PATCH] configs: ls1088aqds: support distro boot   Biwen Li
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Rasmus Villemoes
• [PATCH 11/12] board: fsl: ls2080a: Initialize the GIC redistributor tables   Bin Meng
• [PATCH] configs: ls2080aqds: support distro boot   Biwen Li
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Vignesh Raghavendra
• [PATCH 0/2] uboot: fs/btrfs: Fix read error on LZO compressed extents   Qu Wenruo
• [PATCH 1/2] uboot: fs/btrfs: Use LZO_LEN to replace immediate number   Qu Wenruo
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH 0/2] uboot: fs/btrfs: Fix read error on LZO compressed extents   Qu Wenruo
• [PATCH 1/2] uboot: fs/btrfs: Use LZO_LEN to replace immediate number   Qu Wenruo
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Rasmus Villemoes
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Vignesh Raghavendra
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Matthias Brugger
• [PATCH] arm64: zynqmp Add support for zcu111 revA   Michal Simek
• [PATCH v6 03/12] serial: actions: add compatible string   André Przywara
• [PATCH v6 04/12] arm: dts: sync dts for Action Semi S900   André Przywara
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Rasmus Villemoes
• [PATCH v6 06/12] clk: actions: Add common clock driver   André Przywara
• [PATCH v6 10/12] actions: Move defconfig options to Kconfig   André Przywara
• [PATCH v6 11/12] arm: add Cubieboard7 board support   André Przywara
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   David Sterba
• [PATCH v3 3/5] riscv: Provide a mechanism to fix DT for reserved memory   Bin Meng
• [PATCH v3 4/5] riscv: Setup reserved-memory node for FU540   Bin Meng
• [PATCH v3 5/5] riscv: Copy the reserved-memory nodes to final DT   Bin Meng
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Matthias Brugger
• [PATCH 1/1] efi_loader: fix function descriptions in efi_disk.c   Heinrich Schuchardt
• [PATCH] efi_loader: simplify logical expression in efi_disk_add_dev()   Heinrich Schuchardt
• [EXT] [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Kuldeep Singh
• [EXT] [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Rasmus Villemoes
• [RFC PATCH] arch: Add explicit linker script for u-boot-elf   Michal Simek
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   Tom Warren
• [PATCH v2 0/3] cmd: add driver, fs and part type listing commands   Niel Fourie
• [PATCH v2 1/3] cmd: part: Add subcommand to list supported partition tables   Niel Fourie
• [PATCH v2 2/3] cmd: fs: Add command to list supported fs types   Niel Fourie
• [PATCH v2 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Niel Fourie
• [PATCH v2] bootcount_ext: Add flag to enable/disable bootcount   Simon Glass
• [RFC PATCH v2] cmd: mp: change the command name from cpu to mp   Simon Glass
• [PATCH v2 32/39] irq: Add a method to convert an interrupt to ACPI   Simon Glass
• [PATCH v3] arm: add acpi support for the arm   Simon Glass
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   David Sterba
• [PATCH 0/2] efi_loader: detect EFI system partition   Heinrich Schuchardt
• [PATCH 1/2] part: detect EFI system partition   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: identify EFI system partition   Heinrich Schuchardt
• [RFC 06/14] efi_loader: capsule: add capsule_on_disk support   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: description of efi_variable.c   Heinrich Schuchardt
• [RFC PATCH v2] cmd: mp: change the command name from cpu to mp   Pragnesh Patel
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v3 1/3] cmd: Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v3 2/3] test: Add PStore command tests   Frédéric Danis
• [PATCH v3 3/3] cmd: Fixup DT to pass PStore Ramoops parameters   Frédéric Danis
• [PATCH v2 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Sean Anderson
• [PATCH v4 0/3] Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v4 1/3] cmd: Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v4 2/3] test: Add PStore command tests   Frédéric Danis
• [PATCH v4 3/3] cmd: Fixup DT to pass PStore Ramoops parameters   Frédéric Danis
• [PATCH] cmd: ubi: add a command to rename volume   Philippe Reynes
• [PATCH v3 3/3] cmd: Fixup DT to pass PStore Ramoops parameters   Heinrich Schuchardt
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Wolfgang Denk
• [PATCH v3 2/3] test: Add PStore command tests   Wolfgang Denk
• [PATCH v3 1/5] riscv: Add boot hartid to Device tree   Atish Patra
• [PATCH] cmd: ubi: add a command to rename volume   Wolfgang Denk
• [PATCH v3 3/5] riscv: Provide a mechanism to fix DT for reserved memory   Atish Patra
• [PATCH v7 00/22] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v7 01/22] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v7 02/22] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v7 03/22] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v7 04/22] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v7 05/22] clk: Add functions to register CCF clock structs   Sean Anderson
• [PATCH v7 06/22] clk: Add K210 pll support   Sean Anderson
• [PATCH v7 07/22] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v7 08/22] clk: Add K210 clock support   Sean Anderson
• [PATCH v7 09/22] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v7 10/22] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v7 11/22] reset: Add generic reset driver   Sean Anderson
• [PATCH v7 12/22] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v7 13/22] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v7 14/22] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v7 15/22] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v7 16/22] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v7 17/22] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v7 18/22] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v7 19/22] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v7 20/22] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v7 21/22] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v7 22/22] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v3 4/5] riscv: Setup reserved-memory node for FU540   Atish Patra
• [PATCH] efi_loader: eliminate EFI_CALL() for variable access   Heinrich Schuchardt
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Heinrich Schuchardt
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v2 0/8] Cortina Access Drivers Package 2   Alex Nemirovsky
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v2 2/8] board: presidio-asic: Add eMMC board support   Alex Nemirovsky
• [PATCH v2 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v2 4/8] board: presidio-asic: Add I2C support   Alex Nemirovsky
• [PATCH v2 5/8] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
• [PATCH v2 6/8] board: presidio: add LED support   Alex Nemirovsky
• [PATCH v2 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v2 8/8] board: presidio-asic: Add SPI NAND and NOR support   Alex Nemirovsky
• [PATCH v3 4/5] riscv: Setup reserved-memory node for FU540   Bin Meng
• [PATCH v3 3/5] riscv: Provide a mechanism to fix DT for reserved memory   Bin Meng
• [PATCH] armv8: ls1028aqds: add some environments   andy.tang at nxp.com
• [PATCH 0/2] patman: Add changelog customization options   Sean Anderson
• [PATCH 1/2] patman: Add option to suppress empty changelog entries   Sean Anderson
• [PATCH 2/2] patman: Add option to disable combined changelogs   Sean Anderson
• [PATCH] clk: Add more information to debug messages   Sean Anderson
• [PATCH] docs: Fix conf.py for Sphinx 2.0   Sean Anderson
• [PATCH v2 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [PATCH 1/2 v2] armv8: ls1028aqds: add some environments   andy.tang at nxp.com
• [PATCH 2/2] armv8: ls1028a: clean up the environment variables   andy.tang at nxp.com
• [PATCH] clk: Add more information to debug messages   Lukasz Majewski
• [PATCH 11/12] board: fsl: ls2080a: Initialize the GIC redistributor tables   Z.q. Hou
• [PATCH] mtd: spi-nor-core: call WATCHDOG_RESET() in spi_nor_ready()   Vignesh Raghavendra
• [PATCH v3] lib: Improve _parse_integer_fixup_radix base 16 detection   Michal Simek
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ley Foon Tan
• [PATCH 1/2] arm64: zynqmp: Add support for debug uart also for U-Boot proper   Michal Simek
• [PATCH 2/2] arm64: zynqmp: Move timeout for clock propagation below psu_init   Michal Simek
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Kristian Amlie
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Wolfgang Denk
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Heiko Schocher
• [PATCH] configs: ls1012afrwy: fix wrong env of board   Biwen Li
• [u-boot][PATCH] spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum   Tudor.Ambarus at microchip.com
• [u-boot][PATCH 1/2] spi: atmel-quadspi: fix possible MMIO window size overrun   Tudor.Ambarus at microchip.com
• [u-boot][PATCH 2/2] spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses   Tudor.Ambarus at microchip.com
• [*** MED SPAM ***]Re: [PATCH] cmd: ubi: add a command to rename volume   Philippe REYNES
• [PATCH v2 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Niel Fourie
• [PATCH v2] cmd: ubi: add a command to rename volume   Philippe Reynes
• [PATCH v5 0/3] Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v5 1/3] cmd: Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v5 2/3] test: Add PStore command tests   Frédéric Danis
• [PATCH v5 3/3] cmd: Fixup DT to pass PStore Ramoops parameters   Frédéric Danis
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Rasmus Villemoes
• [PATCH v2 2/2] spi: allow calling WATCHDOG_RESET during long reads   Rasmus Villemoes
• [RFC PATCH 6/9] mkimage_fit_atf.sh: produce working binaries by default   Michal Simek
• [PATCH] configs: ls1012afrwy: adjust env kernel_addr_r   Biwen Li
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Wolfgang Denk
• [PATCH v3 1/2] timer: mpc83xx_timer: fix build with CONFIG_{HW_, }WATCHDOG   Rasmus Villemoes
• [PATCH v3 2/2] allow opting out of WATCHDOG_RESET() from timer interrupt   Rasmus Villemoes
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Wolfgang Denk
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Frédéric Danis
• [PATCH v3 1/2] timer: mpc83xx_timer: fix build with CONFIG_{HW_, }WATCHDOG   Wolfgang Denk
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Wolfgang Denk
• [PATCH] tools: fw_env: use erasesize from MEMGETINFO ioctl   Rasmus Villemoes
• [PATCH] tools: fw_env: use erasesize from MEMGETINFO ioctl   Wolfgang Denk
• [PATCH] tools: fw_env: use erasesize from MEMGETINFO ioctl   Rasmus Villemoes
• [PATCH] tools: fw_env: use erasesize from MEMGETINFO ioctl   Rasmus Villemoes
• [PATCH] CMD: random: fix return code   Eugeniy Paltsev
• [PATCH] mach-snapdragon: Fix overwriting last digit of serial number   Tom Rini
• [PATCH v7 00/12] Actions S700 SoC support   Amit Singh Tomar
• [PATCH v7 01/12] arm: actions: Add common framework for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH v7 02/12] arm: actions: rename sysmap-s900 to sysmap-owl   Amit Singh Tomar
• [PATCH v7 03/12] serial: actions: add compatible string   Amit Singh Tomar
• [PATCH v7 04/12] arm: dts: sync dts for Action Semi S900   Amit Singh Tomar
• [PATCH v7 05/12] arm: dts: actions: s900: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v7 06/12] clk: actions: Add common clock driver   Amit Singh Tomar
• [PATCH v7 07/12] arm: actions: add S700 SoC device tree   Amit Singh Tomar
• [PATCH v7 08/12] arm: dts: actions: s700: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v7 09/12] arm: add support Actions Semi S700   Amit Singh Tomar
• [PATCH v7 10/12] actions: Move defconfig options to Kconfig   Amit Singh Tomar
• [PATCH v7 11/12] arm: add Cubieboard7 board support   Amit Singh Tomar
• [PATCH v7 12/12] doc: boards: add Cubieboard7 documentation   Amit Singh Tomar
• [PATCH v1] x86: acpi: Add I²C timings to Intel Merrifield platform   Andy Shevchenko
• [PATCH v2] x86: acpi: Add I²C timings to Intel Merrifield platform   Andy Shevchenko
• ext4: invalid extent block on imx7   Tom Rini
• Switching among serial consoles   Tom Rini
• [PATCH] dlmalloc: Add an option to default malloc to init   Tom Rini
• [PATCH 0/2] efi_loader: correct reported length in GetNextVariable()   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: correct reported length in GetNextVariable()   Heinrich Schuchardt
• [PATCH 2/2] efi_selftest: check length report by GetNextVariableName()   Heinrich Schuchardt
• [PATCH] sunxi: Add Inet 86V Rev 2 support   Jagan Teki
• [PATCH 1/1] arm: mvebu: dts: Sort Armada series dts alphabetically   luka.kovacic at sartura.hr
• [PATCH] mtd: spi: Add Macronix MX25U3235F device   twarren at nvidia.com
• [PATCH] qspi: t210: Use dev_read calls for FDT data like base, freq   twarren at nvidia.com
• [PATCH v6 01/12] arm: actions: Add common framework for Actions Owl Semi SoCs   André Przywara
• [PATCH v2 00/10] Add support for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH v2 01/10] dm: core: Add function to get child count of ofnode or device   Chunfeng Yun
• [PATCH v2 02/10] test: dm: add test item for ofnode_get_child_count()   Chunfeng Yun
• [PATCH v2 03/10] sandbox: dts: test: add a node for ofnode_get_child_count()   Chunfeng Yun
• [PATCH v2 04/10] phy: phy-mtk-tphy: add support USB phys   Chunfeng Yun
• [PATCH v2 05/10] phy: phy-mtk-tphy: add support new version   Chunfeng Yun
• [PATCH v2 06/10] phy: phy-mtk-tphy: add a new reference clock   Chunfeng Yun
• [PATCH v2 07/10] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH v2 08/10] arm: dts: mt7629: add usb related nodes   Chunfeng Yun
• [PATCH v2 09/10] dt-bindings: phy-mtk-tphy: add properties of address mapping and clocks   Chunfeng Yun
• [PATCH v2 10/10] dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH 1/1] arm: mvebu: dts: Sort Armada series dts alphabetically   Stefan Roese
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH] patman: Update to use absolute imports   Simon Glass
• [PATCH 1/2] patman: Add option to suppress empty changelog entries   Simon Glass
• [PATCH 2/2] patman: Add option to disable combined changelogs   Simon Glass
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [RFC PATCH 6/9] mkimage_fit_atf.sh: produce working binaries by default   Petr Štetiar
• [PATCH] clk: renesas: Switch to fdtdec_get_addr_size_auto_noparent() on Gen2   Marek Vasut
• [PATCH 1/3] ARM: dts: rmobile: Add IIC3 node on Gen2 R8A7792 V2H   Marek Vasut
• [PATCH 2/3] ARM: dts: rmobile: Enable IIC3 on V2H Blanche   Marek Vasut
• [PATCH 3/3] ARM: rmobile: Implement PMIC reset on V2H Blanche   Marek Vasut
• [PATCH 05/12] net: smc911x: Fix potential memleak() in init fail path   Marek Vasut
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH] ARM: rmobile: Only register ethernet on V2H Blanche if not DM_ETH   Marek Vasut
• [PATCH 12/12] net: smc911x: Add DM support   Marek Vasut
• [PATCH 00/12] net: smc911x: Convert to DM   Marek Vasut
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH V2 00/13] net: smc911x: Convert to DM   Marek Vasut
• [PATCH V2 01/13] net: smc911x: Remove pkt_data_{push,pull}   Marek Vasut
• [PATCH V2 02/13] net: smc911x: Replace malloc()+memset() with calloc()   Marek Vasut
• [PATCH V2 03/13] net: smc911x: Rename smc911x_rx() to smc911x_recv()   Marek Vasut
• [PATCH V2 04/13] net: smc911x: Invert the logic in smc911x_miiphy_{read, write}()   Marek Vasut
• [PATCH V2 05/13] net: smc911x: Fix potential memleak() in init fail path   Marek Vasut
• [PATCH V2 06/13] net: smc911x: Pull MII registration into separate function   Marek Vasut
• [PATCH V2 07/13] net: smc911x: Inline all functions from header file   Marek Vasut
• [PATCH V2 08/13] net: smc911x: Drop weak alias from 32bit accessors   Marek Vasut
• [PATCH V2 09/13] net: smc911x: Convert IO accessors to {read, write}{w, l}()   Marek Vasut
• [PATCH V2 10/13] net: smc911x: Pass around driver private data   Marek Vasut
• [PATCH V2 11/13] net: smc911x: Clean up the status handling in smc911x_recv()   Marek Vasut
• [PATCH V2 12/13] net: smc911x: Split non-DM specific bits from common code   Marek Vasut
• [PATCH V2 13/13] net: smc911x: Add DM support   Marek Vasut
• [PATCH v8 00/12] Actions S700 SoC support   Amit Singh Tomar
• [PATCH v8 01/12] arm: actions: Add common framework for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH v8 02/12] arm: actions: rename sysmap-s900 to sysmap-owl   Amit Singh Tomar
• [PATCH v8 03/12] serial: actions: add compatible string   Amit Singh Tomar
• [PATCH v8 04/12] arm: dts: sync dts for Action Semi S900   Amit Singh Tomar
• [PATCH v8 05/12] arm: dts: actions: s900: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v8 06/12] clk: actions: Add common clock driver   Amit Singh Tomar
• [PATCH v8 07/12] arm: actions: add S700 SoC device tree   Amit Singh Tomar
• [PATCH v8 08/12] arm: dts: actions: s700: add u-boot specific dtsi file   Amit Singh Tomar
• [PATCH v8 09/12] arm: add support Actions Semi S700   Amit Singh Tomar
• [PATCH v8 10/12] actions: Move defconfig options to Kconfig   Amit Singh Tomar
• [PATCH v8 11/12] arm: add Cubieboard7 board support   Amit Singh Tomar
• [PATCH v8 12/12] doc: boards: add Cubieboard7 documentation   Amit Singh Tomar
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH 1/2] patman: Add option to suppress empty changelog entries   Sean Anderson
• bootp problems with rpi4   Nicolas Meaux
• [PATCH 2/2] patman: Add option to disable combined changelogs   Sean Anderson
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [U-Boot] Sharing a hardware lab   Simon Glass
• [PATCH 2/2] patman: Add option to disable combined changelogs   Simon Glass
• [PATCH 1/2] patman: Add option to suppress empty changelog entries   Simon Glass
• [PATCH 1/2] patman: Add option to suppress empty changelog entries   Sean Anderson
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH v8 09/12] arm: add support Actions Semi S700   André Przywara
• [PATCH v8 01/12] arm: actions: Add common framework for Actions Owl Semi SoCs   André Przywara
• [PATCH v8 00/12] Actions S700 SoC support   André Przywara
• [PATCH v1 5/8] spi: dw: Speed up transfer loops   Marek Vasut
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Marek Vasut
• [PATCH v1 1/8] doc: Fix typo in FIT documentation   Marek Vasut
• [PATCH v1 7/8] riscv: Add device tree bindings for SPI   Marek Vasut
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Sean Anderson
• [PATCH v1 7/8] riscv: Add device tree bindings for SPI   Sean Anderson
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Marek Vasut
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Sean Anderson
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Marek Vasut
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Sean Anderson
• [PATCH v1 5/8] spi: dw: Speed up transfer loops   Sean Anderson
• [PATCH v8 00/12] Actions S700 SoC support   Manivannan Sadhasivam
• [PATCH v1 2/8] spi: dw: Add device tree properties for fields in CTRL0   Marek Vasut
• [PATCH 1/1] efi_loader: description efi_convert_pointer()   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: test CalculateCrc32, CopyMem, SetMem   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix freestanding memmove()   Heinrich Schuchardt
• [U-Boot] Sharing a hardware lab   Harald Seiler
• [PATCH v2 0/2] efi_loader: correct reported length in GetNextVariable()   Heinrich Schuchardt
• [PATCH v2 1/2] efi_loader: correct reported length in GetNextVariable()   Heinrich Schuchardt
• [PATCH v2 2/2] efi_selftest: check length report by GetNextVariableName()   Heinrich Schuchardt
• [U-Boot] Sharing a hardware lab   Wolfgang Denk
• [PATCH 1/9] pci: layerscape: Split the EP and RC driver   Xiaowei Bao
• [PATCH 2/9] pci_ep: Add the init function   Xiaowei Bao
• [PATCH 3/9] armv8: dts: ls1046a: Add the PCIe EP node   Xiaowei Bao
• [PATCH 4/9] PCI_EP: layerscape: Add the multiple function supprot   Xiaowei Bao
• [PATCH 5/9] pci_ep: layerscape: Add the workaround for errata A-009460   Xiaowei Bao
• [PATCH 6/9] pci_ep: layerscape: Add Support for ls2085a and ls2080a EP mode   Xiaowei Bao
• [PATCH 7/9] pci_ep: layerscape: Add the SRIOV VFs of PF support   Xiaowei Bao
• [PATCH 8/9] pci: layerscaple: Modify the ls_pcie_dump_atu function   Xiaowei Bao
• [PATCH 9/9] pci_ep: layerscape: Add the PCIe EP mode support for lx2160a-v2   Xiaowei Bao
• [RFT PATCH v1 0/5] usb: Improve robustness of ehci-hcd controller operation   Lukasz Majewski
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Lukasz Majewski
• [RFT PATCH v1 2/5] usb: Handle XACTERR error in DATA phase of USB storage   Lukasz Majewski
• [RFT PATCH v1 3/5] usb: Add some delay to wait for slow USB devices to be operational   Lukasz Majewski
• [RFT PATCH v1 4/5] usb: Provide code to handle spinup of USB usb devices (mostly HDDs)   Lukasz Majewski
• [RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data   Lukasz Majewski
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Marek Vasut
• [RFT PATCH v1 2/5] usb: Handle XACTERR error in DATA phase of USB storage   Marek Vasut
• [RFT PATCH v1 3/5] usb: Add some delay to wait for slow USB devices to be operational   Marek Vasut
• [RFT PATCH v1 4/5] usb: Provide code to handle spinup of USB usb devices (mostly HDDs)   Marek Vasut
• [RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data   Marek Vasut
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH 1/1] efi_loader: definition of GetNextVariableName()   Heinrich Schuchardt
• [PATCH V2 02/13] net: smc911x: Replace malloc()+memset() with calloc()   Masahiro Yamada
• NanoPi NEO Board uboot 2020.01 does not load the 5.5.9 (example) kernel   ukrfoil.com, Cтудиопак Украина, Восточный регион
• [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Giulio Benetti
• [PATCH 00/18] i.MXRT1050 add LCDIF support   Giulio Benetti
• [U-Boot] Sharing a hardware lab   Simon Glass
• [PATCH v5 00/12] ClearFog Base static variant support   Joel Johnson
• [PATCH v2 1/5] cmd: mvebu: bubt: add A38x support   Joel Johnson
• [PATCH 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd   Joel Johnson
• [PATCH v2 00/19] i.MXRT1050 add LCDIF support   Giulio Benetti
• [PATCH v2 01/19] clk: imx: pllv3: add enable_bit   Giulio Benetti
• [PATCH v2 02/19] clk: imx: clk-imxrt1050: fix typo in clock name "video:"   Giulio Benetti
• [PATCH v2 03/19] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL   Giulio Benetti
• [PATCH v2 04/19] clk: imx: clk-imxrt1050: add set_parent() callback   Giulio Benetti
• [PATCH v2 05/19] videomodes: add helper function to convert from ctfb to display_timing   Giulio Benetti
• [PATCH v2 06/19] sunxi: display: use common video_ctfb_mode_to_display_timing()   Giulio Benetti
• [PATCH v2 07/19] video: mxsfb: add support for DM CLK   Giulio Benetti
• [PATCH v2 08/19] video: mxsfb: add support for i.MXRT   Giulio Benetti
• [PATCH v2 09/19] video: mxsfb: refactor for using display_timings   Giulio Benetti
• [PATCH v2 10/19] video: mxsfb: enable setting HSYNC negative polarity   Giulio Benetti
• [PATCH v2 11/19] video: mxsfb: enable setting VSYNC negative polarity   Giulio Benetti
• [PATCH v2 12/19] video: mxsfb: enable setting PIXDATA on negative edge   Giulio Benetti
• [PATCH v2 13/19] video: mxsfb: enable setting ENABLE negative polarity   Giulio Benetti
• [PATCH v2 14/19] imxrt1050_evk: add 16bpp video support if video layer enabled   Giulio Benetti
• [PATCH v2 15/19] ARM: dts: i.mxrt1050: add lcdif node   Giulio Benetti
• [PATCH v2 15/19] ARM: dts: i.mxrt1050: add lcdif node   Giulio Benetti
• [PATCH v2 16/19] ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux   Giulio Benetti
• [PATCH v2 17/19] arch: arm: dts: imxrt1050-evk: add lcdif node   Giulio Benetti
• [PATCH v2 18/19] configs: imxrt1050-evk: enable video support/console   Giulio Benetti
• [PATCH v2 19/19] configs: imxrt1050-evk: temporary disable DCACHE   Giulio Benetti
• [PATCH v2 15/19] ARM: dts: i.mxrt1050: add lcdif node   Giulio Benetti
• [PATCH v2 00/19] i.MXRT1050 add LCDIF support   Giulio Benetti
• [PATCH resend 0/2] gpio: mpc8xxx: honour shadow register when writing gpdat   Rasmus Villemoes
• [PATCH v2 0/3] Support SDMA mode on RPI4 target - 32bit   Peng Fan
• [PATCH 1/6] net: dwc_eth_qos: Fully rewrite RX descriptor field 3   Marek Vasut
• [PATCH 2/6] net: dwc_eth_qos: Correctly wrap around TX descriptor tail pointer   Marek Vasut
• [PATCH 3/6] net: dwc_eth_qos: Flush the RX descriptors on init   Marek Vasut
• [PATCH 4/6] net: dwc_eth_qos: Invalidate RX descriptor before reading   Marek Vasut
• [PATCH 5/6] net: dwc_eth_qos: Invalidate RX packet DMA buffer   Marek Vasut
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Marek Vasut
• [PATCH] arm: dts: bcm283x: Allow UARTs to work before relocation   Simon Glass
• [PATCH] rockchip: mkimage: Use an existing macro instead of a decimal value   Kever Yang
• [PATCH v2 1/2] arm: dts: bcm283x: Allow UARTs to work before relocation   Simon Glass
• [PATCH v2 2/2] arm: bcm283x: serial: Move ofdata reading to probe() method   Simon Glass
• [Patch v5 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API   Kuldeep Singh
• Pull request for UEFI sub-system for efi-2020-04-rc4 (5)   Heinrich Schuchardt
• [RFC] Sandbox reset   Heinrich Schuchardt
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Lukasz Majewski
• [RFT PATCH v1 2/5] usb: Handle XACTERR error in DATA phase of USB storage   Lukasz Majewski
• [RFT PATCH v1 3/5] usb: Add some delay to wait for slow USB devices to be operational   Lukasz Majewski
• [PATCH 1/6] net: dwc_eth_qos: Fully rewrite RX descriptor field 3   Ramon Fried
• [PATCH 2/6] net: dwc_eth_qos: Correctly wrap around TX descriptor tail pointer   Ramon Fried
• [PATCH 3/6] net: dwc_eth_qos: Flush the RX descriptors on init   Ramon Fried
• [PATCH 5/6] net: dwc_eth_qos: Invalidate RX packet DMA buffer   Ramon Fried
• [PATCH 4/6] net: dwc_eth_qos: Invalidate RX descriptor before reading   Ramon Fried
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Ramon Fried
• [RFC PATCH 0/4] qemu: arm64: Add support for uefi firmware management protocol routines   Sughosh Ganu
• [RFC PATCH 1/4] efidebug: capsule: Add a command to update capsule on disk   Sughosh Ganu
• [RFC PATCH 2/4] semihosting: Change semihosting file operation functions into global symbols   Sughosh Ganu
• [RFC PATCH 3/4] semihosting: Add support for writing to a file   Sughosh Ganu
• [RFC PATCH 4/4] qemu: arm64: Add support for efi firmware management protocol routines   Sughosh Ganu
• [RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data   Lukasz Majewski
• [RFT PATCH v1 4/5] usb: Provide code to handle spinup of USB usb devices (mostly HDDs)   Lukasz Majewski
• [PATCH 07/10] board: stm32mp1: add finished good in board identifier OTP   Patrick DELAUNAY
• [PATCH v5 00/12] ClearFog Base static variant support   Stefan Roese
• [PATCH v5 01/12] arm: mvebu: fix SerDes table alignment   Stefan Roese
• [PATCH v5 02/12] arm: mvebu: solidrun: remove hardcoded DTS MAC address   Stefan Roese
• [PATCH v5 03/12] arm: mvebu: clearfog: use Pro name by default   Stefan Roese
• [PATCH v5 04/12] arm: mvebu: clearfog: initial ClearFog Base variant   Stefan Roese
• [PATCH v5 05/12] arm: mvebu: clearfog: Add option for 2.5 Gbps SFP   Stefan Roese
• [PATCH v5 06/12] arm: mvebu: clearfog: Add SATA mode flags   Stefan Roese
• [PATCH v5 07/12] arm: mvebu: clearfog: Unify DT selection paths   Stefan Roese
• [PATCH v5 08/12] arm: mvebu: clearfog: add SPI offsets   Stefan Roese
• [PATCH v5 09/12] arm: mvebu: enable working default boot support   Stefan Roese
• [PATCH v5 10/12] arm: mvebu: clearfog: move ENV params to Kconfig   Stefan Roese
• [PATCH v5 11/12] arm: mvebu: clearfog: don't always use SPL MMC   Stefan Roese
• [PATCH v5 12/12] arm: mvebu: clearfog: Use Pro DT by default   Stefan Roese
• [PATCH v5 05/12] arm: mvebu: clearfog: Add option for 2.5 Gbps SFP   Baruch Siach
• [PATCH v5 05/12] arm: mvebu: clearfog: Add option for 2.5 Gbps SFP   Stefan Roese
• [PATCH v2 1/5] cmd: mvebu: bubt: add A38x support   Stefan Roese
• [PATCH v2 2/5] cmd: mvebu: bubt: correct U-Boot spelling   Stefan Roese
• [PATCH v2 3/5] cmd: mvebu: bubt: verify A38x target device type   Stefan Roese
• [PATCH v2 4/5] arm: mvebu: clearfog: enable bubt command   Stefan Roese
• [PATCH v2 5/5] cmd: mvebu: bubt: show image boot device   Stefan Roese
• [PATCH v2 1/5] cmd: mvebu: bubt: add A38x support   Stefan Roese
• [PATCH 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd   Stefan Roese
• [PATCH 1/3] net: fman: add support for all RGMII delay modes   Priyanka Jain (OSS)
• [PATCH 2/2] arm: mvebu: clearfog: support multiple SATA boot   Stefan Roese
• [PATCH 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd   Stefan Roese
• [U-Boot] Sharing a hardware lab   Harald Seiler
• [PATCH 2/3] armv8/ls1043ardb: RGMII ports require internal delay   Priyanka Jain (OSS)
• [PATCH 2/3] armv8/ls1043ardb: RGMII ports require internal delay   Madalin Bucur (OSS)
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Marek Vasut
• [RFC PATCH 1/4] efidebug: capsule: Add a command to update capsule on disk   Heinrich Schuchardt
• [RFT PATCH v1 2/5] usb: Handle XACTERR error in DATA phase of USB storage   Marek Vasut
• [RFT PATCH v1 3/5] usb: Add some delay to wait for slow USB devices to be operational   Marek Vasut
• [RFT PATCH v1 4/5] usb: Provide code to handle spinup of USB usb devices (mostly HDDs)   Marek Vasut
• [RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data   Marek Vasut
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Marek Vasut
• [RFC PATCH 0/4] qemu: arm64: Add support for uefi firmware management protocol routines   Heinrich Schuchardt
• [PATCH v2] net: eth-uclass: Fix message if mac is coming from DT or ROM   Michal Simek
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Ramon Fried
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Ramon Fried
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Marek Vasut
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Lukasz Majewski
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Ramon Fried
• [RFT PATCH v1 4/5] usb: Provide code to handle spinup of USB usb devices (mostly HDDs)   Lukasz Majewski
• [RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data   Lukasz Majewski
• [RFT PATCH v1 2/5] usb: Handle XACTERR error in DATA phase of USB storage   Lukasz Majewski
• adding support for locking on macronix flashes   Rasmus Villemoes
• [u-boot][PATCH 2/2] spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses   Tudor.Ambarus at microchip.com
• [PATCH v3 02/23] main: Drop show_boot_progress() prototype   Tom Rini
• [PATCH v3 06/23] buildman: Allow ignoring warnings in the return code   Tom Rini
• [PATCH v3 10/23] travis: Don't copy files into .bm-work/   Tom Rini
• [PATCH v3 12/23] gitlab/azure: Use the -w option for sandbox_spl   Tom Rini
• [PATCH v3 12/23] gitlab/azure: Use the -w option for sandbox_spl   Tom Rini
• [PATCH v3 11/23] travis: Split the building into two parts   Tom Rini
• [PATCH v3 13/23] travis/gitlab/azure: Use --board buildman flag with test.py   Tom Rini
• [PATCH v3 09/23] buildman: Drop the -a option   Tom Rini
• [PATCH v3 15/23] travis/gitlab/azure: Drop the buildman -d flag   Tom Rini
• [PATCH v3 16/23] gitlab/azure: Drop unnecessary if..fi when using test.py   Tom Rini
• [PATCH v3 17/23] gitlab/azure: Use -w flag for all test.py builds   Tom Rini
• [PATCH v3 14/23] travis/gitlab/azure: Drop BUILDMAN variable with test.py   Tom Rini
• [PATCH v3 18/23] travis/gitlab/azure: Use bash to avoid a_test_which_does_not_exist   Tom Rini
• [PATCH v3 19/23] travis/gitlab/azure: Use -W to avoid warnings check   Tom Rini
• [PATCH v3 22/23] travis/gitlab/azure: Drop repeated buildman call with test.py   Tom Rini
• [PATCH v3 20/23] travis/gitlab/azure: Enable test_handoff   Tom Rini
• [PATCH v3 21/23] travis/gitlab/azure: Simplify the exit code for test.py   Tom Rini
• [PATCH v3 23/23] test/py: Allow using buildman to build U-Boot   Tom Rini
• [RFC] Sandbox reset   Simon Glass
• [PATCH 6/6] net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor   Marek Vasut
• [PATCH 0/3] arm64: zynqmp: Add support for running U-Boot in EL3 again   Michal Simek
• [PATCH 1/3] firmware: zynqmp: Enable IPI code calling also in EL3   Michal Simek
• [PATCH 2/3] arm64: zynqmp: Reorder parameters for zynqmp_mmio_write()   Michal Simek
• [PATCH 3/3] arm64: zynqmp: Add support for u-boot.itb generation without ATF   Michal Simek
• [PATCH v1 1/8] doc: Fix typo in FIT documentation   Tom Rini
• [RFC PATCH 6/9] mkimage_fit_atf.sh: produce working binaries by default   Michal Simek
• [PATCH] arm: dts: bcm283x: Allow UARTs to work before relocation   Tom Rini
• [PATCH 0/3] sunxi: produce working binaries by default   Petr Štetiar
• [PATCH 1/3] Kconfig: add config options for automatic builds   Petr Štetiar
• [PATCH 2/3] tools: add Dust based .its file templating   Petr Štetiar
• [PATCH 3/3] sunxi: replace .its file generator with Dust template   Petr Štetiar
• [PATCH 0/3] sunxi: produce working binaries by default   Peter Robinson
• [PATCH] arm64: versal: Disable DDR cache mapping if DDR is not enabled   Michal Simek
• [PATCH] arm64: xilinx: Never touch DDR if system has no DDR   Michal Simek
• [PATCH v2] watchdog: versal: Add support for Xilinx window watchdog   Michal Simek
• [RFC] Sandbox reset   Heinrich Schuchardt
• [PATCH v2 02/10] test: dm: add test item for ofnode_get_child_count()   Simon Glass
• [RFC PATCH 6/9] mkimage_fit_atf.sh: produce working binaries by default   Petr Štetiar
• [PATCH v5 04/12] arm: mvebu: clearfog: initial ClearFog Base variant   Joel Johnson
• [PATCH v2 3/5] cmd: mvebu: bubt: verify A38x target device type   Joel Johnson
• [PATCH v2 05/19] videomodes: add helper function to convert from ctfb to display_timing   Simon Glass
• Switching among serial consoles   Simon Glass
• Re: [PATCH v1] x86: acpi: Add I²C timings to Intel Merrifield platform   Simon Glass
• [RFC] Sandbox reset   Simon Glass
• [PATCH v2 01/10] dm: core: Add function to get child count of ofnode or device   Simon Glass
• [PATCH v2 03/10] sandbox: dts: test: add a node for ofnode_get_child_count()   Simon Glass
• [PATCH] CMD: random: fix return code   Simon Glass
• [PATCH v2 1/3] cmd: part: Add subcommand to list supported partition tables   Simon Glass
• [PATCH v2 2/3] cmd: fs: Add command to list supported fs types   Simon Glass
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Simon Glass
• [PATCH v2 5/8] led: led_cortina: Add CAxxx LED support   Simon Glass
• [PATCH v2 6/8] board: presidio: add LED support   Simon Glass
• [PATCH v2 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Simon Glass
• [PATCH v2] cmd: ubi: add a command to rename volume   Simon Glass
• [PATCH 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd   Joel Johnson
• [PATCH v3 0/3] Add command to display or save Linux PStore dumps   Tom Rini
• [PATCH v2 05/19] videomodes: add helper function to convert from ctfb to display_timing   Giulio Benetti
• [PATCH v2] bootcount_ext: Add flag to enable/disable bootcount   Frédéric Danis
• [PATCH 1/6] net: dwc_eth_qos: Fully rewrite RX descriptor field 3   Stephen Warren
• [PATCH v5 00/12] ClearFog Base static variant support   Baruch Siach
• [PATCH v3] cmd: ubi: add a command to rename volume   Philippe Reynes
• Pull request for UEFI sub-system for efi-2020-04-rc4 (5)   Tom Rini
• [PATCH v2] cmd: ubi: add a command to rename volume   Philippe REYNES
• [PATCH v2 1/2] arm: mvebu: clearfog: add SCSI to distro bootcmd   Joel Johnson
• [PATCH v2 2/2] arm: mvebu: clearfog: support multiple SATA boot   Joel Johnson
• [PATCH v3 1/5] cmd: mvebu: bubt: add A38x support   Joel Johnson
• [PATCH v3 2/5] cmd: mvebu: bubt: correct U-Boot spelling   Joel Johnson
• [PATCH v3 3/5] cmd: mvebu: bubt: verify A38x target device type   Joel Johnson
• [PATCH v3 4/5] arm: mvebu: clearfog: enable bubt command   Joel Johnson
• [PATCH v3 5/5] cmd: mvebu: bubt: show image boot device   Joel Johnson
• [PATCH v2] cmd: ubi: add a command to rename volume   Rasmus Villemoes
• [PATCH 1/1] test: typo decompression   Heinrich Schuchardt
• [PATCH v3 5/5] cmd: mvebu: bubt: show image boot device   Joel Johnson
• [PATCH v4] cmd: ubi: add a command to rename volume   Philippe Reynes
• [PATCH v2] cmd: ubi: add a command to rename volume   Philippe REYNES
• [PATCH v2 05/19] videomodes: add helper function to convert from ctfb to display_timing   Simon Glass
• [PATCH v2] bootcount_ext: Add flag to enable/disable bootcount   Simon Glass
• [PATCH v3] cmd: ubi: add a command to rename volume   Simon Glass
• [PATCH v4] cmd: ubi: add a command to rename volume   Simon Glass
• [PATCH 1/1] test: typo decompression   Simon Glass
• [PATCH v2 05/19] videomodes: add helper function to convert from ctfb to display_timing   Giulio Benetti
• Totally wrecked my ENV   Udo Waechter
• [PATCH v2 00/16] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v2 01/16] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v2 02/16] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v2 03/16] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v2 04/16] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v2 05/16] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v2 06/16] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v2 07/16] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v2 08/16] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v2 09/16] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v2 10/16] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v2 11/16] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v2 12/16] mtd: spi-nor-core: Use Read SR dummy cycle and address width from SFDP   Pratyush Yadav
• [PATCH v2 13/16] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v2 14/16] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v2 15/16] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v2 16/16] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [NOT FOR MERGE PATCH v2 17/16] arm: dts: k3-j721e: Update OSPI settings for octal DTR mode   Pratyush Yadav
• [PATCH v6 00/12] ClearFog Base static variant support   Joel Johnson
• [PATCH v6 01/12] arm: mvebu: fix SerDes table alignment   Joel Johnson
• [PATCH v6 02/12] arm: mvebu: solidrun: remove hardcoded DTS MAC address   Joel Johnson
• [PATCH v6 03/12] arm: mvebu: clearfog: use Pro name by default   Joel Johnson
• [PATCH v6 04/12] arm: mvebu: clearfog: initial ClearFog Base variant   Joel Johnson
• [PATCH v6 05/12] arm: mvebu: clearfog: Add option for 2.5 Gbps SFP   Joel Johnson
• [PATCH v6 06/12] arm: mvebu: clearfog: Add SATA mode flags   Joel Johnson
• [PATCH v6 07/12] arm: mvebu: clearfog: Unify DT selection paths   Joel Johnson
• [PATCH v6 08/12] arm: mvebu: clearfog: add SPI offsets   Joel Johnson
• [PATCH v6 09/12] arm: mvebu: enable working default boot support   Joel Johnson
• [PATCH v6 10/12] arm: mvebu: clearfog: move ENV params to Kconfig   Joel Johnson
• [PATCH v6 11/12] arm: mvebu: clearfog: don't always use SPL MMC   Joel Johnson
• [PATCH v6 12/12] arm: mvebu: clearfog: Use Pro DT by default   Joel Johnson
• [PATCH resend 0/2] gpio: mpc8xxx: honour shadow register when writing gpdat   Tom Rini
• [RFT PATCH v1 0/5] usb: Improve robustness of ehci-hcd controller operation   Tom Rini
• [RFT PATCH v1 0/5] usb: Improve robustness of ehci-hcd controller operation   Lukasz Majewski
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Marek Vasut
• [RFT PATCH v1 2/5] usb: Handle XACTERR error in DATA phase of USB storage   Marek Vasut
• [RFT PATCH v1 4/5] usb: Provide code to handle spinup of USB usb devices (mostly HDDs)   Marek Vasut
• [RFT PATCH v1 5/5] usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data   Marek Vasut
• [PATCH 00/12] net: smc911x: Convert to DM   Adam Ford
• [PATCH] arm: socfpga: increase QSPI kernel Image size for Stratix10 and Agilex   Tan, Ley Foon
• [PATCH] configs: ls1012afrwy: fix board name   Biwen Li
• [RFC PATCH 1/4] efidebug: capsule: Add a command to update capsule on disk   Sughosh Ganu
• [RFC PATCH 0/4] qemu: arm64: Add support for uefi firmware management protocol routines   Sughosh Ganu
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH v2 01/10] dm: core: Add function to get child count of ofnode or device   Chunfeng Yun
• [PATCH v2 03/10] sandbox: dts: test: add a node for ofnode_get_child_count()   Chunfeng Yun
• [PATCH v4 0/6] DT related fixes for RISC-V UEFI   Atish Patra
• [PATCH v4 1/6] riscv: Add boot hartid to Device tree   Atish Patra
• [PATCH v4 2/6] fdtdec: Fix boundary check   Atish Patra
• [PATCH v4 3/6] riscv: Provide a mechanism to fix DT for reserved memory   Atish Patra
• [PATCH v4 4/6] riscv: Setup reserved-memory node for FU540   Atish Patra
• [PATCH v4 5/6] riscv: Copy the reserved-memory nodes to final DT   Atish Patra
• [PATCH v4 6/6] riscv: Move all fdt fixups together   Atish Patra
• [PATCH v3 1/1] cmd: bootefi: Parse reserved-memory node from DT   Thirupathaiah Annapureddy
• [PATCH v4 3/6] riscv: Provide a mechanism to fix DT for reserved memory   Heinrich Schuchardt
• [PATCH v4 5/6] riscv: Copy the reserved-memory nodes to final DT   Heinrich Schuchardt
• [RFH] ath79: chunking diff from wndr3800 tarball   Daniel F. Dickinson
• [PATCH 1/1] efi_loader: only reserve memory if fdt node enabled   Heinrich Schuchardt
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Lukasz Majewski
• [PATCH v2 0/3] Support SDMA mode on RPI4 target - 32bit   Jaehoon Chung
• [PATCH v4 5/6] riscv: Copy the reserved-memory nodes to final DT   Atish Patra
• [PATCH v4 3/6] riscv: Provide a mechanism to fix DT for reserved memory   Atish Patra
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Jaehoon Chung
• [PATCH v2 2/2] arm: mvebu: clearfog: support multiple SATA boot   Stefan Roese
• [PATCH v3 3/5] cmd: mvebu: bubt: verify A38x target device type   Stefan Roese
• [PATCH v3 5/5] cmd: mvebu: bubt: show image boot device   Stefan Roese
• [PATCH v6 04/12] arm: mvebu: clearfog: initial ClearFog Base variant   Stefan Roese
• [PATCH v2] watchdog: versal: Add support for Xilinx window watchdog   Stefan Roese
• [PATCH v2] board: stm32mp1: add finished good in board identifier OTP   Patrick Delaunay
• [PATCHv2 0/9] fsl: layerscape: Initialize the GIC redistributor   Zhiqiang Hou
• [PATCHv2 1/9] board: lx2160a: Add header file cpu_func.h   Zhiqiang Hou
• [PATCHv2 2/9] arm64: fsl-layerscape: Assign addr to resv_ram if enabled RESV_RAM config   Zhiqiang Hou
• [PATCHv2 3/9] board: lx2160a: Don't program the GIC RD tables if failed to reserve memory   Zhiqiang Hou
• [PATCHv2 4/9] board: lx2160a: Make sure the RD tables address align to 64KB   Zhiqiang Hou
• [PATCHv2 5/9] fsl-layerscape: Kconfig: Select RESV_RAM config if GIC_V3_ITS is enabled   Zhiqiang Hou
• [PATCHv2 6/9] arm64: layerscape: Move GIC RD tables initialization to CPU setup function   Zhiqiang Hou
• [PATCHv2 7/9] configs: ls1088a: Enable GIC_V3_ITS config   Zhiqiang Hou
• [PATCHv2 8/9] configs: ls1028a: Enable GIC_V3_ITS config   Zhiqiang Hou
• [PATCHv2 9/9] configs: ls208xa: Enable GIC_V3_ITS config   Zhiqiang Hou
• [PATCH 1/2] part: detect EFI system partition   Punit Agrawal
• [PATCH 01/10] board: stm32mp1: update command stboard on misc_write result   Patrick DELAUNAY
• [PATCH 02/10] board: stm32mp1: read OTP in command stboard   Patrick DELAUNAY
• [PATCH 03/10] arm: stm32mp: bsec: remove unneeded test   Patrick DELAUNAY
• [PATCH 04/10] arm: stm32mp: bsec: add permanent lock support in bsec driver   Patrick DELAUNAY
• [PATCH 05/10] board: stm32mp1: stboard: lock the OTP after programming   Patrick DELAUNAY
• [PATCH 06/10] arm: stm32mp: improve the error message for smc   Patrick DELAUNAY
• [PATCH 08/10] board: stm32mp1: display reference only for STMicroelectronics board   Patrick DELAUNAY
• [PATCH 09/10] arm: stm32mp: add function get_soc_name   Patrick DELAUNAY
• [PATCH 10/10] arm: stm32mp: fdt: update kernel device tree according the part number   Patrick DELAUNAY
• [PATCH] stm32mp1: add 800 MHz profile support   Patrick DELAUNAY
• [PATCH 1/2] efi_loader: correct reported length in GetNextVariable()   Punit Agrawal
• [PATCH] stm32mp: psci: set cntfrq register of cpu on   Patrick DELAUNAY
• [PATCH 1/2] clk: stm32mp1: correct CKSELR masks   Patrick DELAUNAY
• [PATCH 2/2] clk: stm32mp1: add SPI5_K support   Patrick DELAUNAY
• [PATCH v2 1/2] efi_loader: correct reported length in GetNextVariable()   Punit Agrawal
• [PATCH v2] ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1   Patrick DELAUNAY
• [PATCH 1/9] ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR   Patrick DELAUNAY
• [PATCH 2/9] ram: stm32mp1: display result for software read DQS gating   Patrick DELAUNAY
• [PATCH 3/9] ram: stm32mp1: don't display the prompt two times   Patrick DELAUNAY
• [PATCH 4/9] ram: stm32mp1: tuning: add timeout for polling BISTGSR.BDDONE   Patrick DELAUNAY
• [PATCH 5/9] ram: stm32mp1: tuning: deactivate derating during BIST test   Patrick DELAUNAY
• [PATCH 6/9] ram: stm32mp1: update BIST config for tuning   Patrick DELAUNAY
• [PATCH 7/9] ram: stm32mp1_ddr: fix self refresh disable during DQS training   Patrick DELAUNAY
• [PATCH 8/9] ram: stm32mp1: reduce delay after BIST reset for tuning   Patrick DELAUNAY
• [PATCH 9/9] ram: stm32mp1: the property st,phy-cal becomes optional   Patrick DELAUNAY
• [PATCH] i2c: stm32f7_i2c: allows for any bus frequency   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v2] board: stm32mp1: add finished good in board identifier OTP   Patrice CHOTARD
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH] serial: zynq: Change uart initialization logic   Michal Simek
• [PATCH v2] tools: fw_env: use erasesize from MEMGETINFO ioctl   Rasmus Villemoes
• [PATCH v3] board: stm32mp1: add finished good in board identifier OTP   Patrick Delaunay
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Simon Glass
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Vignesh Raghavendra
• [PATCH v3 5/5] cmd: mvebu: bubt: show image boot device   Joel Johnson
• Totally wrecked my ENV   Wolfgang Denk
• [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support   Joel Johnson
• [PATCH v5 2/5] cmd: mvebu: bubt: correct U-Boot spelling   Joel Johnson
• [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type   Joel Johnson
• [PATCH v5 4/5] arm: mvebu: clearfog: enable bubt command   Joel Johnson
• [PATCH v5 5/5] cmd: mvebu: bubt: show image boot device   Joel Johnson
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Wolfgang Denk
• Seeed BeagleBone Green Wireless: U-boot cli not shown   Darren Ng
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Marek Vasut
• Totally wrecked my ENV   Udo Waechter
• [PATCH v3 0/3] cmd: add driver, fs and part type listing commands   Niel Fourie
• [PATCH v3 1/3] cmd: part: Add subcommand to list supported partition tables   Niel Fourie
• [PATCH v3 2/3] cmd: fs: Add command to list supported fs types   Niel Fourie
• [PATCH v3 3/3] cmd: dm: Fixed/Added DM driver listing subcommands   Niel Fourie
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Lukasz Majewski
• [PATCH 1/1] efi_loader: only reserve memory if fdt node enabled   Atish Patra
• [RFT PATCH v1 1/5] Revert "usb: ehci-hcd: Keep async schedule running"   Marek Vasut
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   twarren at nvidia.com
• [PATCH] ARC: fix up memory accessors   Eugeniy Paltsev
• [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Rasmus Villemoes
• [PATCH v2 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v4 5/6] riscv: Copy the reserved-memory nodes to final DT   Heinrich Schuchardt
• [PATCH] [RFC] i2c: stm32f2: FIXME: Disable I2C timing calculation   Marek Vasut
• [PATCH] [RFC] i2c: stm32f2: FIXME: Disable I2C timing calculation   Marek Vasut
• [PATCH v3 0/3] Support SDMA mode on RPI4 target - 32bit   Jaehoon Chung
• [PATCH v3 1/3] mmc: sdhci: use phys2bus macro when dma address is accessed   Jaehoon Chung
• [PATCH v3 2/3] mmc: sdhci: not return error when SDMA is not supported   Jaehoon Chung
• [PATCH v3 3/3] configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config   Jaehoon Chung
• STM32MP1 boot slow   Marek Vasut
• [PATCH v4 5/6] riscv: Copy the reserved-memory nodes to final DT   Atish Patra
• [PATCH v2] configs: ls1021a: Append othbootargs to bootargs   Alison Wang
• ext4: invalid extent block on imx7   Jan Kiszka
• [PATCH] image-fit: Allow loading FIT image for VxWorks   Bin Meng
• Update and Add features to Bosch Guardian Board   Moses Christopher
• [PATCH 1/5] am335x, guardian: fix spl usb-eth boot   Moses Christopher
• [PATCH 2/5] am335x, guardian: boot stage feedback in headless mode   Moses Christopher
• [PATCH 3/5] am335x, guardian: boot count is stored in AM3352 RTC block   Moses Christopher
• [PATCH 4/5] am335x, guardian: load env from NAND   Moses Christopher
• [PATCH 5/5] am335x, guardian: update boot mechanism   Moses Christopher
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Bin Meng
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Bin Meng
• [PATCH v1] doc: board: verdin-imx8mm: use mainline TF-A   Bin Meng
• [PATCH v2] configs: ls1021a: Append othbootargs to bootargs   Priyanka Jain (OSS)
• Re: [PATCH v1] x86: acpi: Add I²C timings to Intel Merrifield platform   Bin Meng
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Bin Meng
• [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Wolfgang Denk
• [PATCH] configs: ls1012afrwy: fix board name   Priyanka Jain (OSS)
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Marek Behun
• SPI driver for Raspberry Pi 4 (BMC2835)   J. Holland
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Marek Behun
• [PULL] Pull request: u-boot-stm/next =u-boot-stm32-20200324   Patrick DELAUNAY
• [PATCH v3] board: stm32mp1: add finished good in board identifier OTP   Patrick DELAUNAY
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH] condfigs: ls1046aqds: support distro boot   Priyanka Jain (OSS)
• bootp problems with rpi4   Matthias Brugger
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Marek Behun
• [PATCH] MAINTAINERS: add myself as maintainer of fs/btrfs   Marek Behún
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Marek Behun
• [PATCH 2/2] uboot: fs/btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Rasmus Villemoes
• Re: [PATCH v1] x86: acpi: Add I²C timings to Intel Merrifield platform   Andy Shevchenko
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Peter Robinson
• Re: [PATCH v1] x86: acpi: Add I²C timings to Intel Merrifield platform   Bin Meng
• [PATCH] net: ping: reset stored IP once the command finishes   Marek Szyprowski
• [PATCH 1/1] cmd: blkls: Add blkls command   Niel Fourie
• [RFC PATCH 1/1] Makefile: Expand legacy (non-DM) driver warnings   Niel Fourie
• [PATCH 1/1] cmd: blkls: Add blkls command   Stefan Roese
• [PATCH 1/1] cmd: blkls: Add blkls command   Niel Fourie
• [PATCH 0/7] Arm Juno board OF_CONTROL upgrade   Andre Przywara
• [PATCH 1/7] arm: juno: Fix Juno address variables   Andre Przywara
• [PATCH 2/7] uart: pl011: Add proper DM clock support   Andre Przywara
• [PATCH 3/7] arm: juno: Fix UART clock rate   Andre Przywara
• [PATCH 4/7] arm: juno: Enable OF_CONTROL   Andre Przywara
• [PATCH 5/7] arm: juno: Use PSCI based reset   Andre Przywara
• [PATCH 6/7] arm: juno: enable USB   Andre Przywara
• [PATCH 7/7] arm: vexpress64: Remove unneeded CONFIG_ check   Andre Przywara
• ext4: invalid extent block on imx7   Tom Rini
• latest u-boot branch for Marvell Armada 88F3720   Moritz Berghof
• [PATCH V2 02/13] net: smc911x: Replace malloc()+memset() with calloc()   Marek Vasut
• [PATCH 00/12] net: smc911x: Convert to DM   Marek Vasut
• [PATCH V3 00/13] net: smc911x: Convert to DM   Marek Vasut
• [PATCH V3 01/13] net: smc911x: Remove pkt_data_{push,pull}   Marek Vasut
• [PATCH V3 02/13] net: smc911x: Replace malloc()+memset() with calloc()   Marek Vasut
• [PATCH V3 03/13] net: smc911x: Rename smc911x_rx() to smc911x_recv()   Marek Vasut
• [PATCH V3 04/13] net: smc911x: Invert the logic in smc911x_miiphy_{read, write}()   Marek Vasut
• [PATCH V3 05/13] net: smc911x: Fix potential memleak() in init fail path   Marek Vasut
• [PATCH V3 06/13] net: smc911x: Pull MII registration into separate function   Marek Vasut
• [PATCH V3 07/13] net: smc911x: Inline all functions from header file   Marek Vasut
• [PATCH V3 08/13] net: smc911x: Drop weak alias from 32bit accessors   Marek Vasut
• [PATCH V3 09/13] net: smc911x: Convert IO accessors to {read, write}{w, l}()   Marek Vasut
• [PATCH V3 10/13] net: smc911x: Pass around driver private data   Marek Vasut
• [PATCH V3 11/13] net: smc911x: Clean up the status handling in smc911x_recv()   Marek Vasut
• [PATCH V3 12/13] net: smc911x: Split non-DM specific bits from common code   Marek Vasut
• [PATCH V3 13/13] net: smc911x: Add DM support   Marek Vasut
• [PATCH] arm: dts: rockchip: rk3399-roc-pc: Enable FE1.1 USB 2.0 HUB on roc-rk3399-pc   sunil at amarulasolutions.com
• STM32MP1 boot slow   Patrick DELAUNAY
• [PATCH v3 3/3] configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config   Matthias Brugger
• STM32MP1 boot slow   Marek Vasut
• [PATCH V3 10/13] net: smc911x: Pass around driver private data   Harald Seiler
• [PATCH V3 10/13] net: smc911x: Pass around driver private data   Marek Vasut
• latest u-boot branch for Marvell Armada 88F3720   Stefan Roese
• [PATCH V4 00/13] net: smc911x: Convert to DM   Marek Vasut
• [PATCH V4 01/13] net: smc911x: Remove pkt_data_{push,pull}   Marek Vasut
• [PATCH V4 02/13] net: smc911x: Replace malloc()+memset() with calloc()   Marek Vasut
• [PATCH V4 03/13] net: smc911x: Rename smc911x_rx() to smc911x_recv()   Marek Vasut
• [PATCH V4 04/13] net: smc911x: Invert the logic in smc911x_miiphy_{read, write}()   Marek Vasut
• [PATCH V4 05/13] net: smc911x: Fix potential memleak() in init fail path   Marek Vasut
• [PATCH V4 06/13] net: smc911x: Pull MII registration into separate function   Marek Vasut
• [PATCH V4 07/13] net: smc911x: Inline all functions from header file   Marek Vasut
• [PATCH V4 08/13] net: smc911x: Drop weak alias from 32bit accessors   Marek Vasut
• [PATCH V4 09/13] net: smc911x: Convert IO accessors to {read, write}{w, l}()   Marek Vasut
• [PATCH V4 10/13] net: smc911x: Pass around driver private data   Marek Vasut
• [PATCH v1] x86: acpi: Describe USB 3 host controller found on Intel Tangier   Andy Shevchenko
• [PATCH V4 11/13] net: smc911x: Clean up the status handling in smc911x_recv()   Marek Vasut
• [PATCH V4 12/13] net: smc911x: Split non-DM specific bits from common code   Marek Vasut
• [PATCH V4 13/13] net: smc911x: Add DM support   Marek Vasut
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Warren
• latest u-boot branch for Marvell Armada 88F3720   Marek Behun
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Rini
• latest u-boot branch for Marvell Armada 88F3720   Marek Behun
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   tomcwarren3959 at gmail.com
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Warren
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Rini
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Warren
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Rini
• [PATCH 01/12] net: ks8851: Replace malloc()+memset() with calloc()   Marek Vasut
• [PATCH 02/12] net: ks8851: Remove RXQCR cache   Marek Vasut
• [PATCH 03/12] net: ks8851: Use 16bit RXQCR access   Marek Vasut
• [PATCH 04/12] net: ks8851: Trim down struct ks_net   Marek Vasut
• [PATCH 05/12] net: ks8851: Remove type_frame_head   Marek Vasut
• [PATCH 06/12] net: ks8851: Clean up chip ID readout   Marek Vasut
• [PATCH 07/12] net: ks8851: Checkpatch cleanup   Marek Vasut
• [PATCH 08/12] net: ks8851: Pass around driver private data   Marek Vasut
• [PATCH 09/12] net: ks8851: Split non-DM specific bits from common code   Marek Vasut
• [PATCH 10/12] net: ks8851: Receive one packet per recv call   Marek Vasut
• [PATCH 11/12] net: ks8851: Add DM support   Marek Vasut
• [PATCH 12/12] net: ks8851: Add Kconfig entries   Marek Vasut
• [PATCH] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• ext4: invalid extent block on imx7   Jan Kiszka
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Stephen Warren
• ext4: invalid extent block on imx7   Stephen Warren
• ext4: invalid extent block on imx7   Jan Kiszka
• [PATCH] ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support   Tom Warren
• [PATCH] fs: ext4: Fix alignment of cache buffers   Jan Kiszka
• [PATCH] fs: ext4: Fix alignment of cache buffers   Tom Rini
• [PATCH] fs: ext4: Fix alignment of cache buffers   Stephen Warren
• [PATCH] MAINTAINERS: Add usb.h entry to usb   Marek Vasut
• [PATCH] dt-bindings: clock: rk3328 sync from upstream Linux kernel   Kurt Miller
• [PATCH] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• [PATCH V2] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• [PATCH v1] x86: acpi: Describe USB 3 host controller found on Intel Tangier   Bin Meng
• [PATCH 1/7] arm: juno: Fix Juno address variables   Tom Rini
• [PATCH] net: phy: micrel: ksz8061 implement errata 80000688A fix   Bryan O'Donoghue
• [PATCH v3 3/3] configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config   Jaehoon Chung
• [PATCH U-BOOT v2 0/3] fs: btrfs: Fix false LZO decompression error due to missing page boundary check   Qu Wenruo
• [PATCH U-BOOT v2 1/3] fs: btrfs: Use LZO_LEN to replace immediate number   Qu Wenruo
• [PATCH U-BOOT v2 2/3] fs: btrfs: Reject fs with sector size other than PAGE_SIZE   Qu Wenruo
• [PATCH U-BOOT v2 3/3] fs: btrfs: Fix LZO false decompression error caused by pending zero   Qu Wenruo
• [PATCH v3 0/9] Add support for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH v3 1/9] dm: core: Add function to get child count of ofnode or device   Chunfeng Yun
• [PATCH v3 2/9] test: dm: add test item for ofnode_get_child_count()   Chunfeng Yun
• [PATCH v3 3/9] phy: phy-mtk-tphy: add support USB phys   Chunfeng Yun
• [PATCH v3 4/9] phy: phy-mtk-tphy: add support new version   Chunfeng Yun
• [PATCH v3 5/9] phy: phy-mtk-tphy: add a new reference clock   Chunfeng Yun
• [PATCH v3 6/9] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH v3 7/9] arm: dts: mt7629: add usb related nodes   Chunfeng Yun
• [PATCH v3 8/9] dt-bindings: phy-mtk-tphy: add properties of address mapping and clocks   Chunfeng Yun
• [PATCH v3 9/9] dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH v3 3/3] configs: rpi_4_32b_defconfig: enable SDHCI_SDMA config   Matthias Brugger
• [PATCH V2] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Patrice CHOTARD
• [PATCH U-BOOT v2 1/3] fs: btrfs: Use LZO_LEN to replace immediate number   Marek Behun
• [PATCH U-BOOT v2 2/3] fs: btrfs: Reject fs with sector size other than PAGE_SIZE   Marek Behun
• [PATCH U-BOOT v2 3/3] fs: btrfs: Fix LZO false decompression error caused by pending zero   Marek Behun
• [PATCH] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Patrice CHOTARD
• Re: [PATCH] dt-bindings: clock: rk3328 sync from upstream Linux kernel【请注意，邮件由lists.intricate at gmail.com代发】   Kever Yang
• [PATCH 1/1] drivers: i2c: Add brcm iproc I2C driver support   Rayagonda Kokatanur
• [PATCH v1 0/2] Add roc-rk3328-cc support   Chen-Yu Tsai
• [PATCH 1/1] drivers: i2c: Add brcm iproc I2C driver support   Rayagonda Kokatanur
• [PATCH] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• [PATCH] arm: dts: rockchip: rk3399-roc-pc: Enable FE1.1 USB 2.0 HUB on roc-rk3399-pc   Kever Yang
• [PATCH v3 1/8] tool: Move ALIGN_MASK to header as common MACRO   Kever Yang
• [PATCH v3 2/8] tool: aisimage: use ALIGN instead of self defiend macro   Kever Yang
• [PATCH v3 3/8] tools: mkimage: use common ALIGN to do the size align   Kever Yang
• [PATCH v3 4/8] tools: kwbimage: use common ALIGN to do the size align   Kever Yang
• [PATCH v3 5/8] tools: imx8mimage: remove redundant code   Kever Yang
• [PATCH v3 6/8] tool: use ALIGN() to align the size   Kever Yang
• [PATCH v3 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Kever Yang
• [PATCH v3 8/8] mkimage: fit_image: Add option to make fit header align   Kever Yang
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Vignesh Raghavendra
• [PATCH v3 4/8] tools: kwbimage: use common ALIGN to do the size align   Stefan Roese
• [PATCH v2] x86: acpi: Describe USB 3 host controller found on Intel Tangier   Andy Shevchenko
• [PATCH V4 00/13] net: smc911x: Convert to DM   Adam Ford
• [PATCH V4 00/13] net: smc911x: Convert to DM   Marek Vasut
• [PATCH v2 1/1] drivers: i2c: add brcm iproc I2C driver support   Rayagonda Kokatanur
• [PATCH V4 00/13] net: smc911x: Convert to DM   Adam Ford
• [PATCH] fs: ext4: Fix alignment of cache buffers   Peter Robinson
• [PATCH v3 6/8] tool: use ALIGN() to align the size   Heinrich Schuchardt
• [PATCH 0/3] mtd: spi-nor: add support for locking on Macronix nor flashes   Rasmus Villemoes
• [PATCH 1/3] mtd: spi-nor: don't guard stm_*lock* family by preprocessor conditionals   Rasmus Villemoes
• [PATCH 2/3] mtd: spi-nor: add support for locking on Macronix nor flashes   Rasmus Villemoes
• [PATCH 3/3] mtd: spi-nor: set SPI_NOR_HAS_LOCK for Macronix mx25l3205d   Rasmus Villemoes
• Re: [PATCH 1/4] ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Otavio Salvador
• Re: [PATCH 2/4] elgin-rv1108: Use rk_board_late_init() for GPIO settings【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Otavio Salvador
• [PATCH 4/4] rv1108: Fix boot regression   Otavio Salvador
• Re: [PATCH 3/4] elgin-rv1108: Avoid adc_channel_single_shot error【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Otavio Salvador
• [PATCH 0/4] Fixes for rv1108 and rv1108-elgin-r1   Otavio Salvador
• SPI driver for Raspberry Pi 4 (BMC2835)   pierre fontaine
• [PATCH V4 00/13] net: smc911x: Convert to DM   Marek Vasut
• [PATCH v2 1/2] rockchip: video: Use ofnode_decode_display_timing() to parse timing   Kever Yang
• [PATCH v2 2/2] rockchip: video: Convert to use APIs which support live DT   Kever Yang
• [PATCH v1] arch: Add explicit linker script for u-boot-elf   Michal Simek
• [PATCH] net: macb: Fix incorrect write function name when MACB_ZYNQ is enabled.   Michal Simek
• [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Wolfgang Denk
• [PATCH v1] arch: Add explicit linker script for u-boot-elf   Daniel Schwierzeck
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Wolfgang Denk
• [PATCH 0/4] Fixes for rv1108 and rv1108-elgin-r1   Kever Yang
• [PATCH v1] arch: Add explicit linker script for u-boot-elf   Michal Simek
• [PATCH] ARM: omap3_logic boards: Convert to DM_ETH   Adam Ford
• [PATCH] ARM: dts: stm32: Define FMC2 base address   Marek Vasut
• [PATCH V3] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Bin Meng
• [PATCH 2/3] Dockerfile: Build GRUB UEFI target for RISC-V 32-bit   Bin Meng
• [PATCH 0/5] CMD_SAVEENV ifdef cleanup   Rasmus Villemoes
• [PATCH 3/3] Dockerfile: Build QEMU for RISC-V 32-bit   Bin Meng
• [PATCH 1/3] travis-ci: Add EFI grub2 and fit image configuration for qemu-riscv64   Bin Meng
• [PATCH 2/3] travis-ci: Add qemu-riscv32 target   Bin Meng
• [PATCH 3/3] travis-ci: Add qemu-riscv{32,64}_spl targets   Bin Meng
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Bin Meng
• [PATCH 2/4] azure/gitlab: Add qemu-riscv32 testing   Bin Meng
• [PATCH 3/4] test/py: Update u_boot_utils.find_ram_base to bypass the low 2MiB memory   Bin Meng
• [PATCH 4/4] azure/gitlab: Add RISC-V SPL testing   Bin Meng
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Tom Rini
• [PATCH 1/7] arm: juno: Fix Juno address variables   André Przywara
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Tom Rini
• [PATCH 1/7] arm: juno: Fix Juno address variables   Tom Rini
• [U-Boot] Sharing a hardware lab   Simon Glass
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Simon Glass
• STM32MP1 boot slow   Simon Glass
• [PATCH 1/1] cmd: blkls: Add blkls command   Simon Glass
• [PATCH 2/7] uart: pl011: Add proper DM clock support   Simon Glass
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Bin Meng
• STM32MP1 boot slow   Marek Vasut
• [PATCH v2 1/5] rockchip: Separate the reset cause from display cpuinfo   Suniel Mahesh
• [PATCH v2 2/5] roc-rk3399-pc: Set low power leds, power key only if POR   Suniel Mahesh
• [PATCH v2 3/5] rockchip: tpl: Move board_early_init_f after cpu timer   Suniel Mahesh
• [PATCH v2 4/5] rockchip: tpl: Print TPL banner at end-of board_init_f   Suniel Mahesh
• [PATCH v2 5/5] rockchip: spl: Move board_early_init_f after cpu timer   Suniel Mahesh
• [PATCH 2/7] uart: pl011: Add proper DM clock support   André Przywara
• [PATCH] test/py: mmc: Fix 'mmc info' testcase   Harald Seiler
• [PATCH] test/py: mmc: Fix 'mmc info' testcase   Stephen Warren
• [PATCH 1/3] travis-ci: Add EFI grub2 and fit image configuration for qemu-riscv64   Stephen Warren
• [PATCH] ARM: dts: stm32: Repair AV96 SD1 boot   Marek Vasut
• [PATCH 1/2] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Marek Vasut
• [PATCH 2/2] ARM: dts: stm32: Repair SDMMC2 operation   Marek Vasut
• [PATCH] ARM: dts: stm32: Add QSPI NOR on AV96   Marek Vasut
• [PATCH] test/py: mmc: Fix 'mmc info' testcase   Simon Glass
• [PATCH 2/7] uart: pl011: Add proper DM clock support   Simon Glass
• [PATCH] ARM: dts: stm32: Add configuration EEPROM on AV96   Marek Vasut
• [PATCH] ARM: dts: stm32: Use DT alias for the configuration EEPROM   Marek Vasut
• [PATCH] mtd: spi: Add Macronix MX25U3235F device   tomcwarren3959 at gmail.com
• [PATCH 0/3] Misc fixes for Tegra   tomcwarren3959 at gmail.com
• [PATCH 1/3] ARM: tegra: p2771-0000: enable PIE relocation   tomcwarren3959 at gmail.com
• [PATCH 2/3] fdt: Fix 'system' command   tomcwarren3959 at gmail.com
• [PATCH 3/3] ARM: tegra: p2371-2180: add I2C nodes to DT   tomcwarren3959 at gmail.com
• [PATCH 1/7] arm: juno: Fix Juno address variables   Linus Walleij
• [PATCH 0/2 v2] mmc: t210: fix autocal and 400KHz clock   tomcwarren3959 at gmail.com
• [PATCH 1/2] mmc: t210: Add autocal and tap/trim updates for SDMMC1/3   tomcwarren3959 at gmail.com
• [PATCH 2/2] mmc: t210: Fix 'bad' SD-card clock when doing 400KHz card detect   tomcwarren3959 at gmail.com
• [PATCH 2/7] uart: pl011: Add proper DM clock support   Linus Walleij
• [PATCH 0/3 v2] qspi: t210: fix claim_bus and clock/tap delays   tomcwarren3959 at gmail.com
• [PATCH 1/3] qspi: t210: Fix claim_bus's use of the wrong bus/device   tomcwarren3959 at gmail.com
• [PATCH 2/3] qspi: t210: Fix QSPI clock and tap delays   tomcwarren3959 at gmail.com
• [PATCH 3/3] qspi: t210: Use dev_read calls to get FDT data like base, freq   tomcwarren3959 at gmail.com
• [PATCH 0/2] net: tegra: Misc network fixes   tomcwarren3959 at gmail.com
• [PATCH 1/2] net: rt8169: WAR for DHCP not getting IP after kernel boot/reboot   tomcwarren3959 at gmail.com
• [PATCH 2/2] tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all Jetson boards   tomcwarren3959 at gmail.com
• [PATCH v2 0/2] allow CONFIG_SPL_SAVEENV to work with ENV_IS_IN_SPI_FLASH   Rasmus Villemoes
• [PATCH v2 1/2] env: add SAVEENV as an alias of the CMD_SAVEENV symbol   Rasmus Villemoes
• [PATCH v2 2/2] env/sf.c: honour CONFIG_SPL_SAVEENV   Rasmus Villemoes
• [PATCH 0/2] This series of patches add support for the Cortina Access   Alex Nemirovsky
• [PATCH 0/3] t210: miscellaneous patches   tomcwarren3959 at gmail.com
• [PATCH 1/3] t210: do not enable PLLE and UPHY PLL HW PWRSEQ   tomcwarren3959 at gmail.com
• [PATCH 2/3] t210: Adjust ramdisk_addr_r/fdt_addr_r to allow for large kernels   tomcwarren3959 at gmail.com
• [PATCH 3/3] t210: pinmux: Remove pinmux/GPIO init from T210 boards   tomcwarren3959 at gmail.com
• [PATCH v1 0/2] This series of patches add support for the Cortina Access   Alex Nemirovsky
• [PATCH v1 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v1 2/2] board: presidio-asic: Add RAW Parallel NAND support   Alex Nemirovsky
• [PATCH v1 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v1 2/2] board: presidio-asic: Add RAW Parallel NAND support   Alex Nemirovsky
• [PATCH 1/2] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII   Marek Vasut
• [PATCH 2/2] ARM: dts: stm32: Repair ethernet operation on AV96   Marek Vasut
• [PATCH] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Marek Vasut
• [PATCH] ARM: dts: stm32: Repair PMIC configuration on AV96   Marek Vasut
• [PATCH] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Marek Vasut
• Pull request: u-boot-rockchip-20200327   Kever Yang
• [PULL] Pull request: u-boot-stm/next =u-boot-stm32-20200324   Tom Rini
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Tom Rini
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Bin Meng
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Bin Meng
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Tom Rini
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Tom Rini
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Bin Meng
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Tom Rini
• [PATCH v3 1/8] tool: Move ALIGN_MASK to header as common MACRO   Punit Agrawal
• [PATCH] arm64: ls1012a: enable DM support for sata   Priyanka Jain (OSS)
• [Patch V4 0/3] Support SDMA mode on RPI4 target - 32bit   Jaehoon Chung
• [Patch V4 1/3] mmc: sdhci: use phys2bus macro when dma address is accessed   Jaehoon Chung
• [Patch V4 2/3] mmc: sdhci: not return error when SDMA is not supported   Jaehoon Chung
• [Patch V4 3/3] configs: rpi_4 : enable SDHCI_SDMA config   Jaehoon Chung
• [PATCH 1/1] cmd: efidebug: fix int to pointer cast   Heinrich Schuchardt
• [PATCH 0/6] rockchip: rk3328: sync dts and add ROC-RK3328-CC board   Chen-Yu Tsai
• [PATCH 1/6] rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi   Chen-Yu Tsai
• [PATCH 2/6] rockchip: dts: rk3328-evb: Move gmac2io related nodes to -u-boot.dtsi   Chen-Yu Tsai
• [PATCH 3/6] dt-bindings: clock: rk3328: sync from upstream Linux kernel   Chen-Yu Tsai
• [PATCH 4/6] dt-bindings: power: rk3328-power: sync from upstream Linux kernel   Chen-Yu Tsai
• [PATCH 5/6] rockchip: dts: rk3328: Sync device tree files from Linux   Chen-Yu Tsai
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Chen-Yu Tsai
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   David Abdurachmanov
• [PATCH 00/16] efi_loader: non-volatile and runtime variables   Heinrich Schuchardt
• [PATCH 01/16] cmd: efidebug: fix int to pointer cast   Heinrich Schuchardt
• [PATCH 02/16] efi_loader: only reserve memory if fdt node enabled   Heinrich Schuchardt
• [PATCH 03/16] efi_loader: eliminate EFI_CALL() for variable access   Heinrich Schuchardt
• [PATCH 04/16] part: detect EFI system partition   Heinrich Schuchardt
• [PATCH 05/16] efi_loader: identify EFI system partition   Heinrich Schuchardt
• [PATCH 06/16] efi_loader: keep attributes in efi_set_variable_int()   Heinrich Schuchardt
• [PATCH 07/16] efi_loader: export initialization state   Heinrich Schuchardt
• [PATCH 08/16] efi_loader: change setup sequence   Heinrich Schuchardt
• [PATCH 09/16] efi_loader: imply FAT, FAT_WRITE   Heinrich Schuchardt
• [PATCH 10/16] efi_loader: UEFI variable persistence   Heinrich Schuchardt
• [PATCH 11/16] efi_loader: export efi_convert_pointer()   Heinrich Schuchardt
• [PATCH 12/16] efi_loader: optional pointer for ConvertPointer   Heinrich Schuchardt
• [PATCH 13/16] efi_loader: memory buffer for variables   Heinrich Schuchardt
• [PATCH 14/16] efi_loader: use memory based variable storage   Heinrich Schuchardt
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   Bin Meng
• [PATCH 1/4] travis: Remove qemu-riscv64 testing   David Abdurachmanov
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Heinrich Schuchardt
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Bin Meng
• [PATCH 04/16] part: detect EFI system partition   Punit Agrawal
• [PATCH 1/6] rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi   Kever Yang
• [PATCH 2/6] rockchip: dts: rk3328-evb: Move gmac2io related nodes to -u-boot.dtsi   Kever Yang
• [PATCH 3/6] dt-bindings: clock: rk3328: sync from upstream Linux kernel   Kever Yang
• [PATCH 4/6] dt-bindings: power: rk3328-power: sync from upstream Linux kernel   Kever Yang
• [PATCH 5/6] rockchip: dts: rk3328: Sync device tree files from Linux   Kever Yang
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Kever Yang
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Kristian Amlie
• [PATCH 04/16] part: detect EFI system partition   Heinrich Schuchardt
• [PATCH 10/16] efi_loader: UEFI variable persistence   Punit Agrawal
• [PATCH 13/16] efi_loader: memory buffer for variables   Punit Agrawal
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Ley Foon Tan
• [PATCH V3] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Patrice CHOTARD
• [PATCH v7 15/22] riscv: Clean up IPI initialization code   Rick Chen
• [PATCH v7 14/22] riscv: Clear pending interrupts before enabling IPIs   Rick Chen
• [PATCH] arm: dts: rockchip: rk3399-roc-pc: Enable FE1.1 USB 2.0 HUB on roc-rk3399-pc   Jagan Teki
• [PATCH v3 0/4] This patch series introduces universtal update_uboot   Igor Opaniuk
• [PATCH v3 1/4] apalis-tk1: add update_uboot wrapper   Igor Opaniuk
• [PATCH v3 2/4] apalis_t30: add update_uboot wrapper   Igor Opaniuk
• [PATCH v3 3/4] colibri_t20: add update_uboot wrapper   Igor Opaniuk
• [PATCH v3 4/4] colibri_t30: add update_uboot wrapper   Igor Opaniuk
• [PATCH v2 00/13] bugfix/improvements for IMX-based modules   Igor Opaniuk
• [PATCH v2 01/13] ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper   Igor Opaniuk
• [PATCH v2 02/13] ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper   Igor Opaniuk
• [PATCH v2 03/13] ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes   Igor Opaniuk
• [PATCH v2 04/13] ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes   Igor Opaniuk
• [PATCH v2 05/13] colibri_imx6: set gpr1 ENET_CLK_SEL   Igor Opaniuk
• [PATCH v2 06/13] verdin-imx8mm: adjust dram size in case bl32 is used   Igor Opaniuk
• [PATCH v2 07/13] imx8mm_evk: adjust dram size in case bl32 is used   Igor Opaniuk
• [PATCH v2 08/13] verdin-imx8mm: add nfsboot wrapper to env   Igor Opaniuk
• [PATCH v2 09/13] colibri_vf: enable relocation of fdt and initrd   Igor Opaniuk
• [PATCH v2 10/13] colibri_imx7: enable relocation of fdt and initrd   Igor Opaniuk
• [PATCH v2 11/13] apalis_imx6: enable relocation of fdt and initrd   Igor Opaniuk
• [PATCH v2 12/13] colibri-imx6ull: enable relocation of fdt and initrd   Igor Opaniuk
• [PATCH v2 13/13] colibri_imx6: enable relocation of fdt and initrd   Igor Opaniuk
• [PATCH 10/16] efi_loader: UEFI variable persistence   Heinrich Schuchardt
• [PATCH v2 08/13] verdin-imx8mm: add nfsboot wrapper to env   Oleksandr Suvorov
• [PATCH 13/16] efi_loader: memory buffer for variables   Heinrich Schuchardt
• [PATCH v2 07/13] imx8mm_evk: adjust dram size in case bl32 is used   Oleksandr Suvorov
• [PATCH v3 4/4] colibri_t30: add update_uboot wrapper   Oleksandr Suvorov
• [PATCH v3 3/4] colibri_t20: add update_uboot wrapper   Oleksandr Suvorov
• [PATCH v3 2/4] apalis_t30: add update_uboot wrapper   Oleksandr Suvorov
• [PATCH v3 1/4] apalis-tk1: add update_uboot wrapper   Oleksandr Suvorov
• [PATCH] arm: dts: rockchip: rk3399-roc-pc: Enable FE1.1 USB 2.0 HUB on roc-rk3399-pc   Markus Reichl
• [PATCH v2 00/14] net: ldpaa_eth: transition to CONFIG_DM_ETH   Ioana Ciornei
• [RFC PATCH] arch: x86: apl: Read FSP-M configuration from device-tree   Bernhard Messerklinger
• [RFC PATCH v2] arch: x86: apl: Read FSP-M configuration from device-tree   Bernhard Messerklinger
• [Patch V4 3/3] configs: rpi_4 : enable SDHCI_SDMA config   Matthias Brugger
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Marek Vasut
• u-boot environment on x86   Kim Bøndergaard
• [PATCH v3 0/6] arm64: meson: add libretech-pc support   Neil Armstrong
• [PATCH 0/2] drivers/rng: add Amlogic hardware RNG driver   Neil Armstrong
• Enable USB host controller on Odroid-C2   Neil Armstrong
• [PATCH 1/3] riscv: Start using ldflags-y for 32/64bit LDFLAGS   Tom Rini
• [PATCH 2/3] mips: Start using ldflags-y for 32/64bit LDFLAGS   Tom Rini
• [PATCH 3/3] kconfig / kbuild: Re-sync with Linux 4.19   Tom Rini
• [PATCH v2 1/1] cmd: blkls: Add blkls command   Niel Fourie
• [PATCH 0/2] test/py: vboot: fix signature check on config node   Philippe Reynes
• [PATCH 1/2] test/py: vboot: add a test to check fit signature on fit with padding   Philippe Reynes
• [PATCH 2/2] rsa: sig: fix config signature check for fit with padding   Philippe Reynes
• [PATCH 0/6] rockchip: rk3328: sync dts and add ROC-RK3328-CC board   Kurt Miller
• [PATCH 2/3] mips: Start using ldflags-y for 32/64bit LDFLAGS   Daniel Schwierzeck
• [PATCH 2/3] mips: Start using ldflags-y for 32/64bit LDFLAGS   Tom Rini
• [PATCH 2/3] mips: Start using ldflags-y for 32/64bit LDFLAGS   Tom Rini
• [PATCH 0/2] drivers/rng: add Amlogic hardware RNG driver   Heinrich Schuchardt
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Tom Rini
• STM32MP1 boot slow   Patrick DELAUNAY
• STM32MP1 boot slow   Patrick DELAUNAY
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Tom Rini
• [PATCHv2] kconfig / kbuild: Re-sync with Linux 4.19   Tom Rini
• [PATCH v2 0/2] allow CONFIG_SPL_SAVEENV to work with ENV_IS_IN_SPI_FLASH   Wolfgang Denk
• [PATCH] i2c: t210: Add VI_I2C clock source support   tomcwarren3959 at gmail.com
• [PATCH] fdtdec: use full path in fdtdec_get_alias_seq comparison   Vladimir Oltean
• [PATCH 0/6] rockchip: rk3328: sync dts and add ROC-RK3328-CC board   Chen-Yu Tsai
• [PATCH v2 00/12] phy: atheros: dt bindings and cleanup   Michael Walle
• Pull request: u-boot-rockchip-20200327   Tom Rini
• [PATCH v3 1/8] tool: Move ALIGN_MASK to header as common MACRO   Tom Rini
• [PATCH v3 2/8] tool: aisimage: use ALIGN instead of self defiend macro   Tom Rini
• [PATCH v3 3/8] tools: mkimage: use common ALIGN to do the size align   Tom Rini
• [PATCH v3 5/8] tools: imx8mimage: remove redundant code   Tom Rini
• [PATCH v3 4/8] tools: kwbimage: use common ALIGN to do the size align   Tom Rini
• [PATCH v3 6/8] tool: use ALIGN() to align the size   Tom Rini
• [PATCH v3 8/8] mkimage: fit_image: Add option to make fit header align   Tom Rini
• STM32MP1 boot slow   Marek Vasut
• [RFT PATCH v5 0/3] Add compressed Image booting support   Atish Patra
• [PATCH] mtd: spi-nor: Enable dual and quad read for s25fl256s0   bacem.daassi at gmail.com
• [PATCH v3 00/21] dm: add support of new binding in gpio and pincontrol   Tom Rini
• [RFT PATCH v5 0/3] Add compressed Image booting support   Tom Rini
• [PATCH v3 00/21] dm: add support of new binding in gpio and pincontrol   Simon Glass
• [PATCH v2 1/1] cmd: blkls: Add blkls command   Simon Glass
• [PATCH 00/16] efi_loader: non-volatile and runtime variables   Simon Glass
• [PATCH 1/2] test/py: vboot: add a test to check fit signature on fit with padding   Simon Glass
• [PATCH 2/2] rsa: sig: fix config signature check for fit with padding   Simon Glass
• [PATCH v2 0/2] allow CONFIG_SPL_SAVEENV to work with ENV_IS_IN_SPI_FLASH   Rasmus Villemoes
• [PATCH 3/7] arm: juno: Fix UART clock rate   Linus Walleij
• [PATCH 4/7] arm: juno: Enable OF_CONTROL   Linus Walleij
• [PATCH 5/7] arm: juno: Use PSCI based reset   Linus Walleij
• [PATCH 6/7] arm: juno: enable USB   Linus Walleij
• [PATCH 7/7] arm: vexpress64: Remove unneeded CONFIG_ check   Linus Walleij
• [PATCH 1/1] test: typo decompression   Tom Rini
• [PATCH] MAINTAINERS: add myself as maintainer of fs/btrfs   Tom Rini
• [PATCH] fs: ext4: Fix alignment of cache buffers   Tom Rini
• [PATCH] MAINTAINERS: Add usb.h entry to usb   Tom Rini
• [PATCH] test/py: mmc: Fix 'mmc info' testcase   Tom Rini
• [PATCH 0/6] rockchip: rk3328: sync dts and add ROC-RK3328-CC board   Kurt Miller
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Bin Meng
• [PATCH V3] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• [PATCH V4] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Marek Vasut
• [PATCH] ARM: dts: stm32: Adjust PLL4 settings on AV96   Marek Vasut
• [PATCH 00/16] efi_loader: non-volatile and runtime variables   Heinrich Schuchardt
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Heinrich Schuchardt
• [RFC PATCH v2 00/13] arm: add support for SoC S5P4418   Stefan Bosch
• [RFC PATCH v2 01/13] arm: add mach-nexell (header files)   Stefan Bosch
• [RFC PATCH v2 02/13] arm: add mach-nexell (all files except header files)   Stefan Bosch
• [RFC PATCH v2 03/13] gpio: add nexell driver   Stefan Bosch
• [RFC PATCH v2 04/13] i2c: add nexell driver   Stefan Bosch
• [RFC PATCH v2 05/13] mmc: add nexell driver   Stefan Bosch
• [RFC PATCH v2 06/13] pwm: add driver for nexell   Stefan Bosch
• [RFC PATCH v2 07/13] video: add nexell video driver (soc: displaytop)   Stefan Bosch
• [RFC PATCH v2 08/13] video: add nexell video driver (soc: mlc, mipi)   Stefan Bosch
• [RFC PATCH v2 09/13] video: add nexell video driver (soc: lvds, hdmi)   Stefan Bosch
• [RFC PATCH v2 10/13] video: add nexell video driver (soc: dpc, makefile)   Stefan Bosch
• [RFC PATCH v2 11/13] video: add nexell video driver (display/video driver)   Stefan Bosch
• [RFC PATCH v2 12/13] arm: add support for SoC s5p4418 (cpu) / nanopi2 board   Stefan Bosch
• [RFC PATCH v2 13/13] arm: add (default) config for nanopi2 board   Stefan Bosch
• [PATCH 1/1] test/py: UEFI helloworld requires OF_CONTROL   Heinrich Schuchardt
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Heinrich Schuchardt
• [PATCH v2 0/5] azure/gitlab/travis: Add more RISC-V boards testing   Bin Meng
• [PATCH v2 1/5] travis: Replace pre-built ARM/ARM64 GRUB images with the one built from source   Bin Meng
• [PATCH v2 2/5] travis: Build GRUB image for RISC-V 32-bit and 64-bit   Bin Meng
• [PATCH v2 3/5] azure/gitlab/travis: Add qemu-riscv32 testing   Bin Meng
• [PATCH v2 4/5] test/py: Update u_boot_utils.find_ram_base to bypass the low 2MiB memory   Bin Meng
• [PATCH v2 5/5] azure/gitlab/travis: Add RISC-V SPL testing   Bin Meng
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jagan Teki
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jonas Smedegaard
• [PATCH v2 0/2] test/py: vboot: fix signature check on config node   Philippe Reynes
• [PATCH v2 1/2] test/py: vboot: add a test to check fit signature on fit with padding   Philippe Reynes
• [PATCH v2 2/2] rsa: sig: fix config signature check for fit with padding   Philippe Reynes
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   André Przywara
• [PATCH v3 1/2] sunxi: fix support board-specific CONFIG_PREBOOT   Jagan Teki
• [PATCH] common/board_f: Make reserve_mmu generic   Ovidiu Panait
• [PATCH 1/2] dm: core: Add logging on unbind failure   Simon Glass
• [PATCH 2/2] dm: core: Add a way to skip powering down power domains   Simon Glass
• [PATCH v3 00/21] dm: add support of new binding in gpio and pincontrol   Simon Glass
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Simon Glass
• [PATCH v3 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Simon Glass
• [PATCH v2 1/2] rockchip: video: Use ofnode_decode_display_timing() to parse timing   Simon Glass
• [PATCH v2 2/2] rockchip: video: Convert to use APIs which support live DT   Simon Glass
• [PATCH] fdtdec: use full path in fdtdec_get_alias_seq comparison   Simon Glass
• [RFC PATCH 1/1] Makefile: Expand legacy (non-DM) driver warnings   Simon Glass
• [PATCH] fdtdec: use full path in fdtdec_get_alias_seq comparison   Vladimir Oltean
• [U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support   Vagrant Cascadian
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Simon Glass
• [PATCH] fdtdec: use full path in fdtdec_get_alias_seq comparison   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support   Peter Robinson
• [PATCH] fdtdec: use full path in fdtdec_get_alias_seq comparison   Vladimir Oltean
• [PATCH] fdtdec: use full path in fdtdec_get_alias_seq comparison   Simon Glass
• [PATCH] common/board_f: Make reserve_mmu generic   Simon Glass
• [RFC PATCH v2] arch: x86: apl: Read FSP-M configuration from device-tree   Simon Glass
• [PATCH v3 0/7] x86: Improve support for chain-loading U-Boot   Simon Glass
• [PATCH v3] arm: add acpi support for the arm   Simon Glass
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Simon Glass
• [PATCH v2 2/2] rockchip: video: Convert to use APIs which support live DT   Kever Yang
• [PATCH 0/4] Fixes for rv1108 and rv1108-elgin-r1   Kever Yang
• [PATCH v2 2/2] rockchip: video: Convert to use APIs which support live DT   Simon Glass
• [PATCH 2/2] rockchip: video: Convert to use APIs which support live DT   Simon Glass
• [PATCH 0/3] Support reading an u32 from a multi-value property   Dario Binacchi
• [PATCH 1/3] dm: test: add test case for dev_read_u64 function   Dario Binacchi
• [PATCH 2/3] dm: core: support reading a single indexed u32 value   Dario Binacchi
• [PATCH 3/3] dm: core: refactor functions reading an u32 from dt   Dario Binacchi
• [PATCH v6 00/17] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v6 01/17] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v6 02/17] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v6 03/17] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v6 04/17] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v6 05/17] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v6 06/17] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v6 07/17] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v6 08/17] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v6 09/17] clk: sifive: fu540-prci: Add clock initialization for SPL   Pragnesh Patel
• [PATCH v6 10/17] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v6 11/17] sifive: dts: fu540: Enable gpio in U-Boot SPL   Pragnesh Patel
• [PATCH v6 12/17] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v6 13/17] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v6 14/17] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v6 15/17] riscv: sifive: fu540: enable all cache ways from u-boot proper   Pragnesh Patel
• [PATCH v6 16/17] sifive: fix palmer's email address   Pragnesh Patel
• [PATCH v6 17/17] doc: update FU540 RISC-V documentation   Pragnesh Patel
• [PATCH v2 0/3] common/board_f: Make reserve_mmu generic   Ovidiu Panait
• [PATCH v2 1/3] common/board_f: Move arm-specific reserve_mmu to arch/arm/lib/cache.c   Ovidiu Panait
• [PATCH v2 2/3] arm: asm/cache.c: Introduce arm_reserve_mmu   Ovidiu Panait
• [PATCH v2 3/3] common/board_f: Make reserve_mmu generic   Ovidiu Panait
• [PATCH 1/1] cmd: mmc: fix typo 'a EMMC'   Heinrich Schuchardt
• Bug#955310: u-boot-tools: update list of architectures in mkimage   Vagrant Cascadian
• Pull request for UEFI sub-system for efi-2020-04-rc4 (6)   Heinrich Schuchardt
• eMMC: power on protection of boot areas   Heinrich Schuchardt
• [PATCH v1] x86: acpi: Refactor XSDT handling in acpi_add_table()   Andy Shevchenko
• [PATCH] usb: max3420: add the gadget driver   jassisinghbrar at gmail.com
• [PATCH] usb: max3420: add the gadget driver   jassisinghbrar at gmail.com
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Tan, Ley Foon
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Marek Vasut
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Tan, Ley Foon
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Marek Vasut
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Tan, Ley Foon
• [PATCH v3 8/8] mkimage: fit_image: Add option to make fit header align   Kever Yang
• [PATCH 1/3] riscv: Start using ldflags-y for 32/64bit LDFLAGS   Rick Chen
• [RFC 0/7] mx6cuboxi: enable OF_PLATDATA with MMC support   Walter Lozano
• [RFC 1/7] mmc: fsl_esdhc_imx: add OF_PLATDATA support   Walter Lozano
• [RFC 2/7] mmc: fsl_esdhc_imx: add ofdata_to_platdata support   Walter Lozano
• [RFC 3/7] dtoc: update dtb_platdata to support cd-gpio   Walter Lozano
• [RFC 4/7] dm: uclass: add functions to get device by platdata   Walter Lozano
• [RFC 5/7] gpio: mxc_gpio: add OF_PLATDATA support   Walter Lozano
• [RFC 6/7] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled   Walter Lozano
• [RFC 7/7] mx6cuboxi: enable OF_PLATDATA   Walter Lozano
• [RFC 0/7] mx6cuboxi: enable OF_PLATDATA with MMC support   Baruch Siach
• [PATCH v4 1/8] tool: Move ALIGN_MASK to header as common MACRO   Kever Yang
• [PATCH v4 2/8] tool: aisimage: use ALIGN instead of self defiend macro   Kever Yang
• [PATCH v4 3/8] tools: mkimage: use common ALIGN to do the size align   Kever Yang
• [PATCH v4 4/8] tools: kwbimage: use common ALIGN to do the size align   Kever Yang
• [PATCH v4 5/8] tools: imx8mimage: remove redundant code   Kever Yang
• [PATCH v4 6/8] tool: use ALIGN() to align the size   Kever Yang
• [PATCH v4 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Kever Yang
• [PATCH v4 8/8] mkimage: fit_image: Add option to make fit header align   Kever Yang
• [Patch V4 3/3] configs: rpi_4 : enable SDHCI_SDMA config   Jaehoon Chung
• [PATCH v8 00/12] Actions S700 SoC support   Manivannan Sadhasivam
• [PATCH 0/6] rockchip: rk3328: sync dts and add ROC-RK3328-CC board   Chen-Yu Tsai
• [PATCHv2] kconfig / kbuild: Re-sync with Linux 4.19   Masahiro Yamada
• [PATCH 0/4] mmc: manage boot area protection   Heinrich Schuchardt
• [PATCH 1/4] mmc: EXT_CSD registers for write protection   Heinrich Schuchardt
• [PATCH 2/4] mmc: export mmc_send_ext_csd()   Heinrich Schuchardt
• [PATCH 3/4] cmd: mmc: display write protect state of boot partition   Heinrich Schuchardt
• [PATCH 4/4] cmd: mmc: provide boot area protection command   Heinrich Schuchardt
• [PATCH 0/3] Program GIC LPI configuration table   Wasim Khan
• [PATCH v4 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Heinrich Schuchardt
• Antwort: Re: [RFC PATCH v2] arch: x86: apl: Read FSP-M configuration from device-tree   Bernhard Messerklinger
• [PATCH v4 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Kever Yang
• [PATCH 1/2] efi_loader: correct reported length in GetNextVariable()   AKASHI Takahiro
• [PATCH v7 04/22] clk: Fix clk_get_by_* handling of index   Rick Chen
• [PATCH 2/2] efi_selftest: check length report by GetNextVariableName()   AKASHI Takahiro
• [PATCH 1/1] efi_loader: definition of GetNextVariableName()   AKASHI Takahiro
• [PATCH v7 05/22] clk: Add functions to register CCF clock structs   Rick Chen
• [PATCH] efi_loader: eliminate EFI_CALL() for variable access   AKASHI Takahiro
• [PATCH v7 22/22] riscv: Add Sipeed Maix support   Rick Chen
• Pull request: u-boot-sunxi/master   Jagan Teki
• x86: apl: PCI enumeration issue   Bernhard Messerklinger
• [PATCH v7 15/22] riscv: Clean up IPI initialization code   Rick Chen
• [RFC 06/14] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH] arm: stm32mp1: activate data cache in SPL and before relocation   Patrick Delaunay
• x86: apl: PCI enumeration issue   Bin Meng
• Antwort: Re: [RFC PATCH v2] arch: x86: apl: Read FSP-M configuration from device-tree   Bernhard Messerklinger
• STM32MP1 boot slow   Patrick DELAUNAY
• [PATCH v4 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Heinrich Schuchardt
• [RFC PATCH v2] arch: x86: apl: Read FSP-M configuration from device-tree   Bin Meng
• Antwort: Re: x86: apl: PCI enumeration issue   Bernhard Messerklinger
• [PATCH] efi_loader: eliminate EFI_CALL() for variable access   Heinrich Schuchardt
• [PATCH] dm: spi: fix CPHA and implement CPOL for soft-spi   J. Holland
• x86: apl: PCI enumeration issue   Bin Meng
• [PATCH v7 22/22] riscv: Add Sipeed Maix support   Sean Anderson
• Antwort: Re: Re: x86: apl: PCI enumeration issue   Bernhard Messerklinger
• [PATCH] efi_loader: eliminate EFI_CALL() for variable access   AKASHI Takahiro
• x86: apl: PCI enumeration issue   Bin Meng
• [PATCH v2 1/1] cmd: blkls: Add blkls command   Stefan Roese
• [PATCH] ARM: dts: stm32: Repair AV96 SD1 boot   Patrice CHOTARD
• [PATCH 1/1] vexpress_ca9x4: Enable use of correct DTB file and restore EFI loader.   Kristian Amlie
• Issue enabling TPM 2.0 on RPI   J. Holland
• [PATCH 00/10] meson: enable USB Gadget support fot GXL/GXM SoCs   Neil Armstrong
• [PATCH 01/10] generic-phy: add generic_phy_get_by_node()   Neil Armstrong
• [PATCH 02/10] phy: meson-gxl-usb: add set_mode call to force switch to peripheral mode   Neil Armstrong
• [PATCH 03/10] arm: meson-gx: add board_usb_init()/cleanup() for USB gadget   Neil Armstrong
• [PATCH 04/10] arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot   Neil Armstrong
• [PATCH 05/10] configs: libretech-cc: Enable USB gadget with Mass Storage function   Neil Armstrong
• [PATCH 06/10] configs: libretech-ac: Enable USB gadget with Mass Storage function   Neil Armstrong
• [PATCH 07/10] configs: khadas-vim2: Enable USB gadget with Mass Storage function   Neil Armstrong
• [PATCH 08/10] configs: khadas-vim: Enable USB gadget with Mass Storage function   Neil Armstrong
• [PATCH 09/10] configs: libretech-s905d-pc: Enable USB gadget with Mass Storage function   Neil Armstrong
• [PATCH 10/10] configs: libretech-s912-pc: Enable USB gadget with Mass Storage function   Neil Armstrong
• [PULL] u-boot-usb/next   Marek Vasut
• SPI driver for Raspberry Pi 4 (BMC2835)   J. Holland
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Bin Meng
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Marek Vasut
• [PATCH] image-fit: Allow loading FIT image for VxWorks   Bin Meng
• [PATCH] arm: stm32mp1: activate data cache in SPL and before relocation   Marek Vasut
• [PATCH 10/16] efi_loader: UEFI variable persistence   Punit Agrawal
• pull request of u-boot-fsl-qoriq for v2020.04   Priyanka Jain
• [PATCH] ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocation   Priyanka Jain (OSS)
• STM32MP1 boot slow   Marek Vasut
• [PATCH V4] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2   Patrice CHOTARD
• [PATCH v2] board: lx2160a: Correct board fixup for PCIe nodes   Priyanka Jain (OSS)
• [PATCH 0/3] Program GIC LPI configuration table   Priyanka Jain (OSS)
• [PATCH 1/2] arm64: ls1028a: remove fdt_high environment variable   Priyanka Jain (OSS)
• [PATCH] lx2160a : Add emmc in boot_targets environment variable   Priyanka Jain (OSS)
• [PATCH 1/1] armv8: ls1028a: Update secure boot headers offset   Priyanka Jain (OSS)
• [PATCH] lx2160a : Remove default VID setting   Priyanka Jain (OSS)
• [PATCH] board: ls1028ardb: add BOARD_LATE_INIT config   Priyanka Jain (OSS)
• [PATCH v2 0/2] allow CONFIG_SPL_SAVEENV to work with ENV_IS_IN_SPI_FLASH   Wolfgang Denk
• [PATCH] armv8: ls1028a: add dhcp boot target device   Priyanka Jain (OSS)
• [PATCH] lx2160a: Add dhcp in boot_targets   Priyanka Jain (OSS)
• [PATCH 1/3] net: fman: add support for all RGMII delay modes   Priyanka Jain (OSS)
• [PATCH] ARM: dts: stm32: Define FMC2 base address   Patrice CHOTARD
• [PATCH 1/2] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Patrice CHOTARD
• [PATCH 13/16] efi_loader: memory buffer for variables   Punit Agrawal
• [PATCH V2 1/2] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Marek Vasut
• [PATCH V2 2/2] ARM: dts: stm32: Repair SDMMC2 operation   Marek Vasut
• [PATCH 1/2] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Marek Vasut
• [PATCH] include/configs: ls1012afrwy: fix load address of itb with bootm command   Priyanka Jain (OSS)
• [PATCH v3] pci-host-ecam-generic: access config space independent of system-wide bus id   Priyanka Jain (OSS)
• [PATCH] board: fsl: lx2160a: fix SDHC1_DAT4 signal routing   Priyanka Jain (OSS)
• [PATCH] configs: ls1088aqds: support distro boot   Priyanka Jain (OSS)
• [PATCH] configs: ls2080aqds: support distro boot   Priyanka Jain (OSS)
• [PATCH 1/2 v2] armv8: ls1028aqds: add some environments   Priyanka Jain (OSS)
• [PATCH v2] arch: Add explicit linker script for u-boot-elf   Michal Simek
• [PATCH] configs: ls1012afrwy: fix wrong env of board   Priyanka Jain (OSS)
• [RESEND v8 6/8] dm: arm64: ls1043a: add i2c DM support   Priyanka Jain (OSS)
• [PATCH 1/2] configs: arm64: ls1012afrdm Enable CONFIG_BLK   Priyanka Jain (OSS)
• [PATCH 1/1] configs: ls1012ardb: secure boot: Add PFE config   Priyanka Jain (OSS)
• [PATCH] configs: disable eMMC HS200 support on layerscape platforms   Priyanka Jain (OSS)
• [PATCH] configs: ls1021a: Append othbootargs to bootargs   Priyanka Jain (OSS)
• [PATCH] configs: ls1012afrwy: adjust env kernel_addr_r   Priyanka Jain (OSS)
• [Patch v2] arm: dts: lx2160aqds: Add FSPI node properties   Priyanka Jain (OSS)
• [RESEND Patch v2] configs: lx2160a: Enable FSPI support   Priyanka Jain (OSS)
• [PATCH] configs: lx2160a: Define ENV_ADDR value   Priyanka Jain (OSS)
• [PATCH] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Patrice CHOTARD
• [PATCH] configs: lx2160a: Access flash memory as per spi-mem   Priyanka Jain (OSS)
• [Patch v3 3/3] arm: dts: lx2160a: Use flexspi in octal I/O mode   Priyanka Jain (OSS)
• [PATCH] ARM: dts: stm32: Add QSPI NOR on AV96   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add configuration EEPROM on AV96   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Marek Vasut
• [PATCH] ARM: dts: stm32: Use DT alias for the configuration EEPROM   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Repair PMIC configuration on AV96   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Patrice CHOTARD
• [PATCH 1/2] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII   Patrice CHOTARD
• [PATCH 2/2] ARM: dts: stm32: Repair ethernet operation on AV96   Patrice CHOTARD
• [RFC PATCH v3] arch: x86: apl: Read FSP-M configuration from device-tree   Bernhard Messerklinger
• [PATCH] arm: stm32mp1: activate data cache in SPL and before relocation   Patrick DELAUNAY
• [PATCH] arm: stm32mp1: activate data cache in SPL and before relocation   Marek Vasut
• [RFC 0/7] mx6cuboxi: enable OF_PLATDATA with MMC support   Walter Lozano
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v3 1/1] cmd: blkls: Add blkls command   Niel Fourie
• [PATCH v3 00/17] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v3 01/17] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v3 02/17] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v3 03/17] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v3 04/17] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v3 05/17] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v3 06/17] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v3 07/17] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v3 08/17] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v3 09/17] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v3 10/17] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v3 11/17] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v3 12/17] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v3 13/17] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v3 14/17] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v3 16/17] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v3 17/17] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• [RFC PATCH 1/1] Makefile: Expand legacy (non-DM) driver warnings   Niel Fourie
• [PATCH] fs: btrfs: support sparse extents   Marek Behún
• [PATCH v2] fs: btrfs: support sparse extents   Marek Behún
• [PATCH] fs: btrfs: support sparse extents   Marek Behun
• [PATCH u-boot-marvell 1/4] arm: mvebu: turris_mox: Fix early SPI communication   Marek Behún
• [PATCH u-boot-marvell 2/4] arm: mvebu: dts: turris_mox: update sdhci properties   Marek Behún
• [PATCH u-boot-marvell 3/4] arm: mvebu: turris_mox: Setup Linux's device tree before boot   Marek Behún
• [PATCH u-boot-marvell 4/4] arm: mvebu: dts: turris_mox: fix USB3 regulator   Marek Behún
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Jagan Teki
• [PATCH v2 0/4] rockchip: rk3399: Fix HDMI out   Jagan Teki
• [PATCH v2 1/4] arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates   Jagan Teki
• [PATCH v2 2/4] video: rockchip: Fix vop modes for rk3399   Jagan Teki
• [PATCH v2 3/4] rockchip: Enable pre console for rk3399   Jagan Teki
• [PATCH v2 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI   Jagan Teki
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Chen-Yu Tsai
• Pull request for UEFI sub-system for efi-2020-04-rc4 (6)   Tom Rini
• [PATCH v2 1/4] arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates   Mark Kettenis
• [PATCH v2 0/3] ARC: IO: rework IO accessors   Eugeniy Paltsev
• [PATCH v2 1/3] ARC: IO: add volatile to accessors   Eugeniy Paltsev
• [PATCH v2 2/3] ARC: IO: add compiler barriers to IO accessors   Eugeniy Paltsev
• [PATCH v2 3/3] ARC: IO: add MB for __raw_* memory accessors   Eugeniy Paltsev
• [PATCH] net: macb: Fix incorrect write function name when MACB_ZYNQ is enabled.   Joe Hershberger
• [PATCH] net: phy: micrel: ksz8061 implement errata 80000688A fix   Joe Hershberger
• [PATCH v2 0/3] ARC: IO: rework IO accessors   Alexey Brodkin
• [PATCH 1/1] cmd: mmc: fix typo 'a EMMC'   Jaehoon Chung
• [PATCH v2 00/14] vboot: Fix forged-configuration vulnerability   Simon Glass
• [PATCH v3 00/29] dm: Add programmatic generation of ACPI tables (part A)   Simon Glass
• [PATCH v3 01/29] cpu: Support querying the address width   Simon Glass
• [PATCH v3 02/29] spi: Add SPI mode enums   Simon Glass
• [PATCH v3 03/29] tpm: cr50: Release locality on exit   Simon Glass
• [PATCH v3 04/29] tpm: cr50: Add a comment for cr50_priv   Simon Glass
• [PATCH v3 05/29] tpm: cr50: Use the correct GPIO binding   Simon Glass
• [PATCH v3 06/29] tpm: Don't cleanup unless an error happens   Simon Glass
• [PATCH v3 07/29] dm: pci: Allow disabling auto-config for a device   Simon Glass
• [PATCH v3 08/29] x86: Correct wording of coreboot source code   Simon Glass
• [PATCH v3 09/29] x86: apl: Move p2sb ofdata reading to the correct method   Simon Glass
• [PATCH v3 10/29] pci: Adjust dm_pci_read_bar32() to return errors correctly   Simon Glass
• [PATCH v3 11/29] x86: apl: Add Global NVS table header   Simon Glass
• [PATCH v3 12/29] dm: core: Add basic ACPI support   Simon Glass
• [PATCH v3 13/29] dts: Add a binding for hid-over-i2c   Simon Glass
• [PATCH v3 14/29] acpi: Add a binding for ACPI settings in the device tree   Simon Glass
• [PATCH v3 15/29] acpi: Add a simple sandbox test   Simon Glass
• [PATCH v3 16/29] x86: Move acpi_s3.h to include/acpi/   Simon Glass
• [PATCH v3 17/29] x86: Move acpi_table header to main include/ directory   Simon Glass
• [PATCH v3 18/29] acpi: Add an __ACPI__ preprocessor symbol   Simon Glass
• [PATCH v3 19/29] acpi: Add a central location for table version numbers   Simon Glass
• [PATCH v3 20/29] acpi: Add support for DMAR   Simon Glass
• [PATCH v3 21/29] test: Add hexdump.h to the unit test header   Simon Glass
• [PATCH v3 22/29] acpi: Add a method to write tables for a device   Simon Glass
• [PATCH v3 23/29] acpi: Convert part of acpi_table to use acpi_ctx   Simon Glass
• [PATCH v3 24/29] x86: Allow devices to write ACPI tables   Simon Glass
• [PATCH v3 25/29] acpi: Drop code for missing XSDT from acpi_write_rsdp()   Simon Glass
• [PATCH v3 26/29] acpi: Move acpi_add_table() to generic code   Simon Glass
• [PATCH v3 27/29] acpi: Put table-setup code in its own function   Simon Glass
• [PATCH v3 28/29] acpi: Move the xsdt pointer to acpi_ctx   Simon Glass
• [PATCH v3 29/29] acpi: Add an acpi command   Simon Glass
• Pull request: u-boot-sunxi/master   Tom Rini
• pull request of u-boot-fsl-qoriq for v2020.04   Tom Rini
• [PATCH v4 8/8] mkimage: fit_image: Add option to make fit header align   Tom Rini
• [PATCH v2] arch: Add explicit linker script for u-boot-elf   Tom Rini
• [ANN] U-Boot v2020.04-rc4 released   Tom Rini
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH v4 0/8] Cortina Access Drivers Package 2   Alex Nemirovsky
• [PATCH v4 1/8] mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs   Alex Nemirovsky
• [PATCH v1 1/2] mtd: rawnand: ca_nand: add Cortina Access Parallel NAND controller support   Alex Nemirovsky
• [PATCH v4 2/8] board: presidio-asic: Add eMMC board support   Alex Nemirovsky
• [PATCH v1 2/2] board: presidio-asic: Add RAW Parallel NAND support   Alex Nemirovsky
• [PATCH v4 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v4 4/8] board: presidio-asic: Add I2C support   Alex Nemirovsky
• [PATCH v4 5/8] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
• [PATCH v4 6/8] board: presidio: add LED support   Alex Nemirovsky
• [PATCH v4 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v4 8/8] board: presidio-asic: Add SPI NAND and NOR support   Alex Nemirovsky
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Simon Glass
• [PATCH v2 1/3] common/board_f: Move arm-specific reserve_mmu to arch/arm/lib/cache.c   Simon Glass
• [PATCH v2 2/3] arm: asm/cache.c: Introduce arm_reserve_mmu   Simon Glass
• [PATCH v2 3/3] common/board_f: Make reserve_mmu generic   Simon Glass
• [RFC PATCH 1/1] Makefile: Expand legacy (non-DM) driver warnings   Simon Glass
• [PATCH v4 7/8] libfdt: Make fdtdec_get_child_count() available for HOST   Simon Glass
• [PATCH 1/3] dm: test: add test case for dev_read_u64 function   Simon Glass
• [PATCH 2/3] dm: core: support reading a single indexed u32 value   Simon Glass
• [PATCH 3/3] dm: core: refactor functions reading an u32 from dt   Simon Glass
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Tan, Ley Foon
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH RESEND] arm: dts: agilex: Enable QSPI   Marek Vasut
• [PATCH v2] arm: dts: agilex: Enable QSPI   Ley Foon Tan
• [PATCH V2 00/14] ARM: stm32: Fix Avenger96   Marek Vasut
• [PATCH V2 01/14] ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96   Marek Vasut
• [PATCH V2 02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins   Marek Vasut
• [PATCH V2 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96   Marek Vasut
• [PATCH V2 04/14] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Marek Vasut
• [PATCH V2 05/14] ARM: dts: stm32: Repair SDMMC2 operation   Marek Vasut
• [PATCH V2 06/14] ARM: dts: stm32: Add QSPI NOR on AV96   Marek Vasut
• [PATCH V2 07/14] ARM: dts: stm32: Use DT alias for the configuration EEPROM   Marek Vasut
• [PATCH V2 08/14] ARM: dts: stm32: Add configuration EEPROM on AV96   Marek Vasut
• [PATCH V2 09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII   Marek Vasut
• [PATCH V2 10/14] ARM: dts: stm32: Repair ethernet operation on AV96   Marek Vasut
• [PATCH V2 11/14] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Marek Vasut
• [PATCH V2 12/14] ARM: dts: stm32: Repair PMIC configuration on AV96   Marek Vasut
• [PATCH V2 13/14] ARM: dts: stm32: Adjust PLL4 settings on AV96   Marek Vasut
• [PATCH V2 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Marek Vasut
• [PATCH v2] arm: dts: agilex: Enable QSPI   Marek Vasut
• [PATCH v2] arm: dts: agilex: Enable QSPI   Tan, Ley Foon
• u-boot environment on x86   AKASHI Takahiro
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Marek Vasut
• [PULL] u-boot-socfpga/master   Marek Vasut
• [RFC PATCH 1/4] efidebug: capsule: Add a command to update capsule on disk   Takahiro Akashi
• [RFC 00/14] efi_loader: add capsule update support   AKASHI Takahiro
• [PATCH v8 00/12] Actions S700 SoC support   Amit Tomer
• [PATCH 12/16] efi_loader: optional pointer for ConvertPointer   AKASHI Takahiro
• [PATCH 09/16] efi_loader: imply FAT, FAT_WRITE   AKASHI Takahiro
• [PATCH v1 0/4] fix memory leak and compilation warning and rearrange code   Rayagonda Kokatanur
• [PATCH v1 1/4] drivers: mmc: iproc_sdhci: fix possible memory leak   Rayagonda Kokatanur
• [PATCH v1 2/4] drivers: mmc: iproc_sdhci: enable broken R1B response quirk   Rayagonda Kokatanur
• [PATCH v1 3/4] drivers: mmc: iproc_sdhci: fix compilation warning   Rayagonda Kokatanur
• [PATCH v1 4/4] drivers: mmc: iproc_sdhci: move host.mmc init before sdhci_setup_cfg   Rayagonda Kokatanur
• [PATCH v1 2/4] drivers: mmc: iproc_sdhci: enable broken R1B response quirk   Jaehoon Chung
• [RFC PATCH 4/4] qemu: arm64: Add support for efi firmware management protocol routines   Takahiro Akashi
• u-boot environment on x86   Kim Bøndergaard
• [PATCH v2 1/4] arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates   Jagan Teki
• [PATCH 15/16] efi_loader: enable UEFI variables at runtime   Heinrich Schuchardt
• [PATCH 15/16] efi_selftest: adjust runtime test for variables   Heinrich Schuchardt
• [PATCH 16/16] efi_selftest: adjust runtime test for variables   Heinrich Schuchardt
• [PATCH v1 1/1] driver: watchdog: get timeout and clock from dt file   Rayagonda Kokatanur
• Pull request for UEFI sub-system for efi-2020-04-rc5   Heinrich Schuchardt
• [PATCH v3 00/29] dm: Add programmatic generation of ACPI tables (part A)   Heinrich Schuchardt
• [PATCH 09/16] efi_loader: imply FAT, FAT_WRITE   Heinrich Schuchardt
• [PATCH 12/16] efi_loader: optional pointer for ConvertPointer   Heinrich Schuchardt
• [PATCH v1 1/1] driver: watchdog: get timeout and clock from dt file   Stefan Roese
• [PATCH] rockchip: px30: add -u-boot dtsi for soc   Kever Yang
• [PATCH] rockchip: px30-evb: remove redundant include file   Kever Yang
• [PATCH v1 2/4] drivers: mmc: iproc_sdhci: enable broken R1B response quirk   Rayagonda Kokatanur
• [PATCH 09/16] efi_loader: imply FAT, FAT_WRITE   AKASHI Takahiro
• [PATCH 12/16] efi_loader: optional pointer for ConvertPointer   AKASHI Takahiro
• Antwort: [PATCH v3 11/29] x86: apl: Add Global NVS table header   Wolfgang Wallner
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Patrice CHOTARD
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ley Foon Tan
• Antwort: [PATCH v3 12/29] dm: core: Add basic ACPI support   Wolfgang Wallner
• [PATCH 09/16] efi_loader: imply FAT, FAT_WRITE   Mark Kettenis
• [PATCH] configs: ls1012afrwy: drop env qspi_bootcmd   Biwen Li
• [PATCH V2 01/14] ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96   Patrice CHOTARD
• [PATCH V2 02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins   Patrice CHOTARD
• [PATCH V2 04/14] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Patrice CHOTARD
• [PATCH V2 05/14] ARM: dts: stm32: Repair SDMMC2 operation   Patrice CHOTARD
• [PATCH V2 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96   Patrice CHOTARD
• [PATCH V2 06/14] ARM: dts: stm32: Add QSPI NOR on AV96   Patrice CHOTARD
• [PATCH V2 07/14] ARM: dts: stm32: Use DT alias for the configuration EEPROM   Patrice CHOTARD
• [PATCH V2 08/14] ARM: dts: stm32: Add configuration EEPROM on AV96   Patrice CHOTARD
• [PATCH V2 09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII   Patrice CHOTARD
• [PATCH V2 10/14] ARM: dts: stm32: Repair ethernet operation on AV96   Patrice CHOTARD
• [PATCH V2 11/14] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Patrice CHOTARD
• [PATCH V2 12/14] ARM: dts: stm32: Repair PMIC configuration on AV96   Patrice CHOTARD
• [PATCH V2 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Patrice CHOTARD
• [PATCH V2 13/14] ARM: dts: stm32: Adjust PLL4 settings on AV96   Patrice CHOTARD
• [PATCH] Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"   Ye Li
• [PATCH v2] x86: acpi: Describe USB 3 host controller found on Intel Tangier   Bin Meng
• [PATCH 1/5] arm: dts: rockchip: rk3399: add and enable rng node   Lin Jinhan
• [PATCH 2/5] arm: dts: rockchip: px30: add and enable rng node   Lin Jinhan
• [PATCH 3/5] rockchip: rng: Add a driver for random number generator(rng) device   Lin Jinhan
• [PATCH 4/5] rockchip: rk3399: Enable CONFIG_RNG_ROCKCHIP   Lin Jinhan
• [PATCH 5/5] rockchip: px30: Enable CONFIG_RNG_ROCKCHIP   Lin Jinhan
• [PATCH] Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"   Fabio Estevam
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Bin Meng
• [PATCH] mtd: spi: Add Macronix MX25U3235F device   Peter Robinson
• [PATCH u-boot-marvell 1/4] arm: mvebu: turris_mox: Fix early SPI communication   Stefan Roese
• [PATCH u-boot-marvell 4/4] arm: mvebu: dts: turris_mox: fix USB3 regulator   Stefan Roese
• [PATCH u-boot-marvell 2/4] arm: mvebu: dts: turris_mox: update sdhci properties   Stefan Roese
• [PATCH u-boot-marvell 3/4] arm: mvebu: turris_mox: Setup Linux's device tree before boot   Stefan Roese
• [PATCH 1/3] ARM: tegra: p2771-0000: enable PIE relocation   Peter Robinson
• [PATCH 3/3] ARM: tegra: p2371-2180: add I2C nodes to DT   Peter Robinson
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Jagan Teki
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Chen-Yu Tsai
• [PATCH] Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"   Tom Rini
• [PATCH] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Corentin Labbe
• [PATCH resend 0/2] gpio: mpc8xxx: honour shadow register when writing gpdat   Rasmus Villemoes
• [PATCH V2 01/14] ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96   Patrick DELAUNAY
• [PATCH V2 02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins   Patrick DELAUNAY
• [PATCH 6/6] rockchip: rk3328: Add support for ROC-RK3328-CC board   Jagan Teki
• [PATCH V2 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96   Patrick DELAUNAY
• [PATCH V2 04/14] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Patrick DELAUNAY
• [PATCH V2 05/14] ARM: dts: stm32: Repair SDMMC2 operation   Patrick DELAUNAY
• [PATCH v8 00/12] Actions S700 SoC support   Manivannan Sadhasivam
• [PATCH 09/16] efi_loader: imply FAT, FAT_WRITE   Heinrich Schuchardt
• [PATCH] x86: spi: Only use the fast SPI peripheral when support   Simon Glass
• [PATCH] fdtdec: support multiple phandles in memory carveout   Laurentiu Tudor
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH v2 00/14] vboot: Fix forged-configuration vulnerability   Tom Rini
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [PATCH V2 06/14] ARM: dts: stm32: Add QSPI NOR on AV96   Patrick DELAUNAY
• [PATCH V2 05/14] ARM: dts: stm32: Repair SDMMC2 operation   Patrick DELAUNAY
• [PATCH V2 07/14] ARM: dts: stm32: Use DT alias for the configuration EEPROM   Patrick DELAUNAY
• [PATCH V2 08/14] ARM: dts: stm32: Add configuration EEPROM on AV96   Patrick DELAUNAY
• [PATCH V2 09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII   Patrick DELAUNAY
• [PATCH V2 10/14] ARM: dts: stm32: Repair ethernet operation on AV96   Patrick DELAUNAY
• [PATCH V2 11/14] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Patrick DELAUNAY
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Patrice CHOTARD
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Simon Glass
• [PATCH v2 0/3] ARC: IO: rework IO accessors   Tom Rini
• [PATCH V2 13/14] ARM: dts: stm32: Adjust PLL4 settings on AV96   Patrick DELAUNAY
• [PATCH 4/5] rockchip: rk3399: Enable CONFIG_RNG_ROCKCHIP   Peter Robinson
• [RFC PATCH 6/9] mkimage_fit_atf.sh: produce working binaries by default   Tom Rini
• [PATCH V2 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Patrick DELAUNAY
• [PATCH 1/3] Dockerfile: Install riscv32 toolchain from kernel.org   Tom Rini
• [PATCH V2 00/14] ARM: stm32: Fix Avenger96   Patrick DELAUNAY
• [PATCH 01/16] arm: stm32mp: update dependency for STM32_ETZPC   Patrick Delaunay
• [PATCH 02/16] arm: stm32mp: remove dependency for STM32KEY   Patrick Delaunay
• [PATCH 03/16] arm: stm32mp: reset to default environment when serial# change   Patrick Delaunay
• [PATCH 04/16] arm: stm32mp: detect U-Boot version used to save environment   Patrick Delaunay
• [PATCH 05/16] arm: stm32mp: spl: add bsec driver in SPL   Patrick Delaunay
• [PATCH 06/16] arm: stm32mp: spl: display error in board_init_f   Patrick Delaunay
• [PATCH 07/16] board: stm32mp1: Keep error led ON in case of low power detection   Patrick Delaunay
• [PATCH 08/16] board: stm32mp1: update management of boot-led   Patrick Delaunay
• [PATCH 09/16] board: stm32mp1: gt9147 IRQ before reset on EV1   Patrick Delaunay
• [PATCH 10/16] board: stm32mp1: set environment variable fdtfile   Patrick Delaunay
• [PATCH 11/16] board: stm32mp1: check env_get result in board_late_init   Patrick Delaunay
• [PATCH 12/16] board: stm32mp1: add timeout for I/O compensation ready   Patrick Delaunay
• [PATCH 13/16] gpio: stm32: support gpio ops in SPL   Patrick Delaunay
• [PATCH 14/16] ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX   Patrick Delaunay
• [PATCH 15/16] configs: stm32mp1: activate Ethernet PHY Realtek   Patrick Delaunay
• [PATCH 16/16] configs: stm32mp1: activate CONFIG_ERRNO_STR   Patrick Delaunay
• [PATCH 5/8] xhci: mediatek: Add support for MTK xHCI host controller   Marek Vasut
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Marek Vasut
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Simon Glass
• [U-Boot] Please pull last-minute fixes for ARC   Alexey Brodkin
• [U-Boot] [PATCH v1 2/2] gpio: stm32f7: Fix SPL code size   Patrick DELAUNAY
• [PATCH V2 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Marek Vasut
• [PATCH V2 06/14] ARM: dts: stm32: Add QSPI NOR on AV96   Marek Vasut
• [PATCH V2 00/14] ARM: stm32: Fix Avenger96   Marek Vasut
• [PATCH V2 11/14] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Marek Vasut
• [PATCH] rockchip: sdram: fix DRAM bank declaration around OP-TEE   Justin Swartz
• [PATCH 1/1] mmc: adjust Kconfig for mmc sub-commands   Heinrich Schuchardt
• [PATCH V3 00/14] ARM: stm32: Fix Avenger96   Marek Vasut
• [PATCH V3 01/14] ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96   Marek Vasut
• [PATCH V3 02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins   Marek Vasut
• [PATCH V3 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96   Marek Vasut
• [PATCH V3 04/14] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7   Marek Vasut
• [PATCH V3 05/14] ARM: dts: stm32: Repair SDMMC2 operation   Marek Vasut
• [PATCH V3 06/14] ARM: dts: stm32: Add QSPI NOR on AV96   Marek Vasut
• [PATCH V3 07/14] ARM: dts: stm32: Use DT alias for the configuration EEPROM   Marek Vasut
• [PATCH V3 08/14] ARM: dts: stm32: Add configuration EEPROM on AV96   Marek Vasut
• [PATCH V3 09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII   Marek Vasut
• [PATCH V3 10/14] ARM: dts: stm32: Repair ethernet operation on AV96   Marek Vasut
• [PATCH V3 11/14] ARM: dts: stm32: Add missing ethernet PHY reset on AV96   Marek Vasut
• [PATCH V3 12/14] ARM: dts: stm32: Repair PMIC configuration on AV96   Marek Vasut
• [PATCH V3 13/14] ARM: dts: stm32: Adjust PLL4 settings on AV96   Marek Vasut
• [PATCH V3 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board   Marek Vasut
• [PATCH v3 29/29] acpi: Add an acpi command   Leif Lindholm
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-socfpga/master   Tom Rini
• Pull request for UEFI sub-system for efi-2020-04-rc5   Tom Rini
• [PATCH resend 1/2] gpio: mpc8xxx: don't modify gpdat when setting gpio as input   Tom Rini
• [PATCH resend 2/2] gpio: mpc8xxx: don't do RMW on gpdat register when setting value   Tom Rini
• [PATCH resend 1/5] gpio/mpc83xx_spisel_boot.c: gpio driver for SPISEL_BOOT signal   Tom Rini
• [PATCH resend 2/5] gazerbeam: add clocks property to SPI node   Tom Rini
• [PATCH resend 3/5] mpc8xxx_spi: put max_cs to use   Tom Rini
• [PATCH resend 4/5] mpc8xxx_spi: always use 8-bit characters, don't read or write garbage   Tom Rini
• [PATCH resend 5/5] mpc8xxx_spi: implement real ->set_speed   Tom Rini
• [PATCH] image-fit: Allow loading FIT image for VxWorks   Tom Rini
• [PATCH] net: macb: Fix incorrect write function name when MACB_ZYNQ is enabled.   Tom Rini
• [PATCH 1/1] cmd: mmc: fix typo 'a EMMC'   Tom Rini
• [U-Boot] Please pull last-minute fixes for ARC   Tom Rini
• Antwort: [PATCH v3 13/29] dts: Add a binding for hid-over-i2c   Wolfgang Wallner
• Antwort: [PATCH v3 19/29] acpi: Add a central location for table version numbers   Wolfgang Wallner
• Antwort: [PATCH v3 20/29] acpi: Add support for DMAR   Wolfgang Wallner
• buildman summary quesiton   Trevor Woerner