[PATCH V3 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96

Marek Vasut marex at denx.de
Tue Mar 31 19:51:25 CEST 2020


The SD uses different pinmux for the D123DIRline, use such a pinmux,
otherwise there is a pinmux collision on the AV96. Add missing SD
voltage regulator switch and enable SDR104 operation.

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
---
V2: New patch
V3: No change
---
 .../arm/dts/stm32mp157a-avenger96-u-boot.dtsi |  2 +-
 arch/arm/dts/stm32mp157a-avenger96.dts        | 25 ++++++++++++++++---
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
index 8dcd8866e8..47bfbb8d77 100644
--- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
@@ -150,7 +150,7 @@
 	};
 };
 
-&sdmmc1_dir_pins_a {
+&sdmmc1_dir_pins_b {
 	u-boot,dm-spl;
 	pins1 {
 		u-boot,dm-spl;
diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index 3065593bf2..1e9b45b69d 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -76,6 +76,20 @@
 			default-state = "off";
 		};
 	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
 };
 
 &ethernet0 {
@@ -296,15 +310,18 @@
 
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
+	sd-uhs-sdr104;
 	bus-width = <4>;
 	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
 	status = "okay";
 };
 
-- 
2.25.1



More information about the U-Boot mailing list