[PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration

[Jaehoon Chung]

On 3/9/20 9:09 AM, Peng Fan wrote:
> Hi Jaehoon,
> 
>> Subject: [PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration
>>
>> Remove MMC_BROKEN_CD configuration.
>> It doesn't need to use configuration, instead use broken-cd property.
> 
> Will this cause issue if board not use dts saying in SPL stage?

I didn't test on board, but if it will be set to MMC_CAPS_NEEDS_POLL, it will be working fine.
In ci200, i had added MMC_CAP_NEEDS_POLL by default. (So it will be working..)
But in fsl_esdhc's case, i didn't touch.. So i need to check it more.

Will resend patch this after considering SPL.

Best Regards,
Jaehoon Chung

> 
> Regards,
> Peng.
> 
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
>> ---
>>  configs/brppt2_defconfig    | 1 -
>>  configs/ci20_mmc_defconfig  | 1 -
>>  configs/meerkat96_defconfig | 1 -
>>  drivers/mmc/Kconfig         | 5 -----
>>  4 files changed, 8 deletions(-)
>>
>> diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig index
>> f94ea28376..5d1dfde36e 100644
>> --- a/configs/brppt2_defconfig
>> +++ b/configs/brppt2_defconfig
>> @@ -68,7 +68,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y  # CONFIG_SPL_BLK is
>> not set  CONFIG_BOOTCOUNT_LIMIT=y  CONFIG_SYS_I2C_MXC=y
>> -CONFIG_MMC_BROKEN_CD=y  # CONFIG_SPL_DM_MMC is not set
>> CONFIG_FSL_ESDHC=y  CONFIG_MTD=y diff --git
>> a/configs/ci20_mmc_defconfig b/configs/ci20_mmc_defconfig index
>> a0b0772f40..f31a3c44f4 100644
>> --- a/configs/ci20_mmc_defconfig
>> +++ b/configs/ci20_mmc_defconfig
>> @@ -34,7 +34,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y  #
>> CONFIG_DM_DEVICE_REMOVE is not set  CONFIG_JZ4780_EFUSE=y
>> CONFIG_MMC=y -CONFIG_MMC_BROKEN_CD=y  CONFIG_DM_MMC=y  #
>> CONFIG_MMC_HW_PARTITIONING is not set
>> CONFIG_MMC_IO_VOLTAGE=y diff --git a/configs/meerkat96_defconfig
>> b/configs/meerkat96_defconfig index 45f12115ba..d358ed23a5 100644
>> --- a/configs/meerkat96_defconfig
>> +++ b/configs/meerkat96_defconfig
>> @@ -34,7 +34,6 @@ CONFIG_OF_CONTROL=y
>>  CONFIG_DEFAULT_DEVICE_TREE="imx7d-meerkat96"
>>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>  CONFIG_NET_RANDOM_ETHADDR=y
>> -CONFIG_MMC_BROKEN_CD=y
>>  CONFIG_DM_MMC=y
>>  CONFIG_FSL_ESDHC=y
>>  CONFIG_MTD=y
>> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
>> 2f0eedc22f..3722e7bc13 100644
>> --- a/drivers/mmc/Kconfig
>> +++ b/drivers/mmc/Kconfig
>> @@ -18,11 +18,6 @@ config MMC_WRITE
>>  	help
>>  	  Enable write access to MMC and SD Cards
>>
>> -config MMC_BROKEN_CD
>> -	bool "Poll for broken card detection case"
>> -	help
>> -	  If card  detection feature is broken, just poll to detect.
>> -
>>  config DM_MMC
>>  	bool "Enable MMC controllers using Driver Model"
>>  	depends on DM
>> --
>> 2.25.0
>