[PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration

[Peng Fan]

Hi Jaehoon,

> Subject: [PATCH 3/3] mmc: Kconfig: remove MMC_BROKEN_CD configuration
> 
> Remove MMC_BROKEN_CD configuration.
> It doesn't need to use configuration, instead use broken-cd property.

Will this cause issue if board not use dts saying in SPL stage?

Regards,
Peng.

> 
> Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
> ---
>  configs/brppt2_defconfig    | 1 -
>  configs/ci20_mmc_defconfig  | 1 -
>  configs/meerkat96_defconfig | 1 -
>  drivers/mmc/Kconfig         | 5 -----
>  4 files changed, 8 deletions(-)
> 
> diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig index
> f94ea28376..5d1dfde36e 100644
> --- a/configs/brppt2_defconfig
> +++ b/configs/brppt2_defconfig
> @@ -68,7 +68,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y  # CONFIG_SPL_BLK is
> not set  CONFIG_BOOTCOUNT_LIMIT=y  CONFIG_SYS_I2C_MXC=y
> -CONFIG_MMC_BROKEN_CD=y  # CONFIG_SPL_DM_MMC is not set
> CONFIG_FSL_ESDHC=y  CONFIG_MTD=y diff --git
> a/configs/ci20_mmc_defconfig b/configs/ci20_mmc_defconfig index
> a0b0772f40..f31a3c44f4 100644
> --- a/configs/ci20_mmc_defconfig
> +++ b/configs/ci20_mmc_defconfig
> @@ -34,7 +34,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y  #
> CONFIG_DM_DEVICE_REMOVE is not set  CONFIG_JZ4780_EFUSE=y
> CONFIG_MMC=y -CONFIG_MMC_BROKEN_CD=y  CONFIG_DM_MMC=y  #
> CONFIG_MMC_HW_PARTITIONING is not set
> CONFIG_MMC_IO_VOLTAGE=y diff --git a/configs/meerkat96_defconfig
> b/configs/meerkat96_defconfig index 45f12115ba..d358ed23a5 100644
> --- a/configs/meerkat96_defconfig
> +++ b/configs/meerkat96_defconfig
> @@ -34,7 +34,6 @@ CONFIG_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="imx7d-meerkat96"
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_NET_RANDOM_ETHADDR=y
> -CONFIG_MMC_BROKEN_CD=y
>  CONFIG_DM_MMC=y
>  CONFIG_FSL_ESDHC=y
>  CONFIG_MTD=y
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
> 2f0eedc22f..3722e7bc13 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -18,11 +18,6 @@ config MMC_WRITE
>  	help
>  	  Enable write access to MMC and SD Cards
> 
> -config MMC_BROKEN_CD
> -	bool "Poll for broken card detection case"
> -	help
> -	  If card  detection feature is broken, just poll to detect.
> -
>  config DM_MMC
>  	bool "Enable MMC controllers using Driver Model"
>  	depends on DM
> --
> 2.25.0