[RFC PATCH v2] arch: x86: apl: Read FSP-M configuration from device-tree
Bernhard Messerklinger
bernhard.messerklinger at br-automation.com
Fri Mar 27 13:29:54 CET 2020
Move FSP-M configuration to the device-tree like it's already done for
other SoCs (Baytaril).
Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger at br-automation.com>
---
With this patch I moved the fsp-m configuration to the device-tree based
on the baytrail boards.
I have tried to build it so that only entries that differ from the
default configuration need to be added. As a minimum the ddr
configuration must be present.
If you like this way of configuration, I am also willing to do the same
for the fsp-s.
Can you please provide me some feedback?
Changes in v2:
Added commit notes
arch/x86/cpu/apollolake/fsp_m.c | 337 +++++++++++-------
arch/x86/dts/chromebook_coral.dts | 35 ++
.../asm/arch-apollolake/fsp/fsp_m_upd.h | 162 +++++++++
3 files changed, 414 insertions(+), 120 deletions(-)
diff --git a/arch/x86/cpu/apollolake/fsp_m.c b/arch/x86/cpu/apollolake/fsp_m.c
index 5308af8ed4..ee84231acb 100644
--- a/arch/x86/cpu/apollolake/fsp_m.c
+++ b/arch/x86/cpu/apollolake/fsp_m.c
@@ -12,21 +12,6 @@
#include <asm/fsp2/fsp_internal.h>
#include <dm/uclass-internal.h>
-/*
- * ODT settings:
- * If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A and HIGH for ODT_B,
- * choose ODT_A_B_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A
- * and LOW for ODT_B, choose ODT_A_B_HIGH_LOW.
- *
- * Note that the enum values correspond to the interpreted UPD fields
- * within Ch[3:0]_OdtConfig parameters.
- */
-enum {
- ODT_A_B_HIGH_LOW = 0 << 1,
- ODT_A_B_HIGH_HIGH = 1 << 1,
- N_WR_24 = 1 << 5,
-};
-
/*
* LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation.
* There are four physical LPDDR4 channels, each 32-bits wide. There are two
@@ -67,122 +52,234 @@ struct lpddr4_swizzle_cfg {
struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS];
};
-static void setup_sdram(struct fsp_m_config *cfg,
- const struct lpddr4_swizzle_cfg *swizzle_cfg)
-{
- const struct lpddr4_chan_swizzle_cfg *sch;
- /* Number of bytes to copy per DQS */
- const size_t sz = DQ_BITS_PER_DQS;
- int chan;
-
- cfg->memory_down = 1;
- cfg->scrambler_support = 1;
- cfg->channel_hash_mask = 0x36;
- cfg->slice_hash_mask = 9;
- cfg->interleaved_mode = 2;
- cfg->channels_slices_enable = 0;
- cfg->min_ref_rate2x_enable = 0;
- cfg->dual_rank_support_enable = 1;
-
- /* LPDDR4 is memory down so no SPD addresses */
- cfg->dimm0_spd_address = 0;
- cfg->dimm1_spd_address = 0;
-
- for (chan = 0; chan < 4; chan++) {
- struct fsp_ram_channel *ch = &cfg->chan[chan];
-
- ch->rank_enable = 1;
- ch->device_width = 1;
- ch->dram_density = 2;
- ch->option = 3;
- ch->odt_config = ODT_A_B_HIGH_HIGH;
- }
-
- /*
- * CH0_DQB byte lanes in the bit swizzle configuration field are
- * not 1:1. The mapping within the swizzling field is:
- * indices [0:7] - byte lane 1 (DQS1) DQ[8:15]
- * indices [8:15] - byte lane 0 (DQS0) DQ[0:7]
- * indices [16:23] - byte lane 3 (DQS3) DQ[24:31]
- * indices [24:31] - byte lane 2 (DQS2) DQ[16:23]
- */
- sch = &swizzle_cfg->phys[LP4_PHYS_CH0B];
- memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz);
- memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz);
- memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz);
- memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz);
-
- /*
- * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
- */
- sch = &swizzle_cfg->phys[LP4_PHYS_CH0A];
- memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz);
- memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz);
- memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz);
- memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz);
-
- sch = &swizzle_cfg->phys[LP4_PHYS_CH1B];
- memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz);
- memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz);
- memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz);
- memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz);
-
- /*
- * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
- */
- sch = &swizzle_cfg->phys[LP4_PHYS_CH1A];
- memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz);
- memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz);
- memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz);
- memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz);
-}
-
int fspm_update_config(struct udevice *dev, struct fspm_upd *upd)
{
struct fsp_m_config *cfg = &upd->config;
struct fspm_arch_upd *arch = &upd->arch;
+ char chx_buf[30];
+ const struct lpddr4_chan_swizzle_cfg *sch;
+ const struct lpddr4_swizzle_cfg *swizzle_cfg;
+ const size_t sz = DQ_BITS_PER_DQS;
+ bool tmp;
+ const u8 *gpio_table_pins;
+ const char *oem_file;
arch->nvs_buffer_ptr = NULL;
prepare_mrc_cache(upd);
arch->stack_base = (void *)0xfef96000;
arch->boot_loader_tolum_size = 0;
-
arch->boot_mode = FSP_BOOT_WITH_FULL_CONFIGURATION;
- cfg->serial_debug_port_type = 2;
- cfg->serial_debug_port_device = 2;
- cfg->serial_debug_port_stride_size = 2;
- cfg->serial_debug_port_address = 0;
-
- cfg->package = 1;
- /* Don't enforce a memory size limit */
- cfg->memory_size_limit = 0;
- cfg->low_memory_max_value = 2048; /* 2 GB */
- /* No restrictions on memory above 4GiB */
- cfg->high_memory_max_value = 0;
-
- /* Always default to attempt to use saved training data */
- cfg->disable_fast_boot = 0;
-
- const u8 *swizzle_data;
-
- swizzle_data = dev_read_u8_array_ptr(dev, "lpddr4-swizzle",
- LP4_NUM_BYTE_LANES *
- DQ_BITS_PER_DQS *
- LP4_NUM_PHYS_CHANNELS);
- if (!swizzle_data)
- return log_msg_ret("Cannot read swizzel data", -EINVAL);
-
- setup_sdram(cfg, (struct lpddr4_swizzle_cfg *)swizzle_data);
-
- cfg->pre_mem_gpio_table_ptr = 0;
- cfg->profile = 0xb;
- cfg->msg_level_mask = 0;
-
- /* other */
- cfg->skip_cse_rbp = 1;
- cfg->periodic_retraining_disable = 0;
- cfg->enable_s3_heci2 = 0;
+ cfg->serial_debug_port_type = dev_read_u32_default(dev,
+ "fspm,serial-debug-port-type",
+ SERIAL_DEBUG_PORT_TYPE_MMIO);
+ cfg->serial_debug_port_device = dev_read_u32_default(dev,
+ "fspm,serial-debug-port-device",
+ SERIAL_DEBUG_PORT_DEVICE_UART2);
+ if (cfg->serial_debug_port_device == SERIAL_DEBUG_PORT_DEVICE_EXTERNAL)
+ cfg->serial_debug_port_address = dev_read_u32_default(dev,
+ "fspm,serial-debug-port-address",
+ 0);
+ cfg->serial_debug_port_stride_size = dev_read_u32_default(dev,
+ "fspm,serial-debug-port-stride-size",
+ SERIAL_DEBUG_PORT_STRIDE_SIZE_4);
+ cfg->mrc_fast_boot = !dev_read_bool(dev, "fspm,disable-mrc-fast-boot");
+ cfg->igd = !dev_read_bool(dev, "fspm,disable-igd");
+ if (cfg->igd) {
+ cfg->igd_dvmt50_pre_alloc = dev_read_u32_default(dev,
+ "fspm,igd-dvmt50-pre-alloc",
+ IGD_DVMT_50_PRE_ALLOC_64M);
+ cfg->igd_aperture_size = dev_read_u32_default(dev,
+ "fspm,aperture-size",
+ IGD_APERTURE_SIZE_128M);
+ cfg->gtt_size = dev_read_u32_default(dev, "fspm,gtt-size",
+ GTT_SIZE_8M);
+ cfg->primary_video_adaptor = dev_read_u32_default(dev,
+ "fspm,primary-video-adaptor",
+ PRIMARY_VIDEO_ADAPTER_AUTO);
+ }
+ cfg->package = dev_read_u32_default(dev, "fspm,package",
+ PACKAGE_SODIMM);
+ cfg->profile = dev_read_u32_default(dev, "fspm,profile",
+ PROFILE_DDR3_1600_11_11_11);
+ cfg->memory_down = dev_read_u32_default(dev, "fspm,memory-down",
+ MEMORY_DOWN_NO);
+ if (cfg->memory_down & MEMORY_DOWN_YES) {
+ cfg->ddr3_l_page_size = dev_read_u32_default(dev,
+ "fspm,ddr3l-page-size", 1);
+ cfg->ddr3_lasr = dev_read_bool(dev, "fspm,enable-ddr3-lasr");
+ }
+ cfg->scrambler_support = dev_read_bool(dev,
+ "fspm,enable-scrambler-support");
+ tmp = dev_read_bool(dev, "enable-interleaved-mode");
+ cfg->interleaved_mode = (tmp == 0) ? INTERLEAVED_MODE_DISABLE :
+ INTERLEAVED_MODE_ENABLE;
+ cfg->channel_hash_mask = dev_read_u32_default(dev,
+ "fspm,channel-hash-mask",
+ 0);
+ cfg->slice_hash_mask = dev_read_u32_default(dev,
+ "fspm,slice-hash-mask", 0);
+ cfg->channels_slices_enable = dev_read_bool(dev,
+ "fspm,enable-channels-slices");
+ cfg->min_ref_rate2x_enable = dev_read_bool(dev,
+ "fspm,enable-min-ref-rate2x");
+ cfg->dual_rank_support_enable = !dev_read_bool(dev,
+ "fspm,disable-dual-rank-support");
+ tmp = dev_read_bool(dev, "fspm,enable-rmt-mode");
+ cfg->rmt_mode = (tmp == 0) ? RMT_MODE_DISABLE : RMT_MODE_ENABLE;
+ cfg->memory_size_limit = dev_read_u32_default(dev,
+ "fspm,memory-size-limit", 0);
+ cfg->low_memory_max_value = dev_read_u32_default(dev,
+ "fspm,low-memory-max-value", 0);
+ cfg->high_memory_max_value = dev_read_u32_default(dev,
+ "fspm,high-memory-max-value",
+ 0);
+ cfg->disable_fast_boot = dev_read_bool(dev, "fspm,disable-fast-boot");
+ cfg->dimm0_spd_address = 0;
+ cfg->dimm1_spd_address = 0;
+ if (!(cfg->memory_down & MEMORY_DOWN_YES)) {
+ cfg->dimm0_spd_address = dev_read_u32_default(dev,
+ "fspm,dimm0-spd-address", 0xa0);
+ cfg->dimm1_spd_address = dev_read_u32_default(dev,
+ "fspm,dimm1-spd-address", 0xa4);
+ }
+ if (cfg->memory_down != 0) {
+ for (int i = 0; i < FSP_DRAM_CHANNELS; i++) {
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-enable-rank", i);
+ cfg->chan[i].rank_enable = dev_read_bool(dev, chx_buf);
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-device-width", i);
+ cfg->chan[i].device_width = dev_read_u32_default(dev,
+ chx_buf, 0);
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-dram-density", i);
+ cfg->chan[i].dram_density = dev_read_u32_default(dev,
+ chx_buf, 0);
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-option", i);
+ cfg->chan[i].option = dev_read_u32_default(dev, chx_buf,
+ 0);
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-odt-config", i);
+ cfg->chan[i].odt_config = dev_read_u32_default(dev,
+ chx_buf,
+ 0);
+ cfg->chan[i].tristate_clk1 = 0;
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-enable-mode2-n", i);
+ cfg->chan[i].mode2_n = dev_read_u32_default(dev,
+ chx_buf, 0);
+ snprintf(chx_buf, sizeof(chx_buf),
+ "fspm,ch%d-odt-levels", i);
+ cfg->chan[i].odt_levels = dev_read_u32_default(dev,
+ chx_buf,
+ CHX_ODT_LEVELS_CONNECTED_TO_SOC);
+ }
+ }
+ cfg->rmt_check_run = dev_read_bool(dev,
+ "fspm,rmt-degrade-margin-check");
+ cfg->rmt_margin_check_scale_high_threshold = dev_read_u32_default(dev,
+ "fspm,rmt-margin-check-scale-high-threshold",
+ 0);
+ swizzle_cfg = (const struct lpddr4_swizzle_cfg *)dev_read_u8_array_ptr(
+ dev, "lpddr4-swizzle",
+ LP4_NUM_BYTE_LANES *
+ DQ_BITS_PER_DQS *
+ LP4_NUM_PHYS_CHANNELS);
+
+ if (swizzle_cfg) {
+ /*
+ * CH0_DQB byte lanes in the bit swizzle configuration field are
+ * not 1:1. The mapping within the swizzling field is:
+ * indices [0:7] - byte lane 1 (DQS1) DQ[8:15]
+ * indices [8:15] - byte lane 0 (DQS0) DQ[0:7]
+ * indices [16:23] - byte lane 3 (DQS3) DQ[24:31]
+ * indices [24:31] - byte lane 2 (DQS2) DQ[16:23]
+ */
+ sch = &swizzle_cfg->phys[LP4_PHYS_CH0B];
+ memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz);
+ memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz);
+ /*
+ * CH0_DQA byte lanes in the bit swizzle configuration field are
+ * 1:1.
+ */
+ sch = &swizzle_cfg->phys[LP4_PHYS_CH0A];
+ memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz);
+ memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz);
+ sch = &swizzle_cfg->phys[LP4_PHYS_CH1B];
+ memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz);
+ memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz);
+ /*
+ * CH0_DQA byte lanes in the bit swizzle configuration field are
+ * 1:1.
+ */
+ sch = &swizzle_cfg->phys[LP4_PHYS_CH1A];
+ memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz);
+ memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz);
+ memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz);
+ memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz);
+ }
+ cfg->msg_level_mask = dev_read_u32_default(dev, "fspm,msg-level-mask",
+ 0);
+ memset(cfg->pre_mem_gpio_table_pin_num, 0,
+ sizeof(cfg->pre_mem_gpio_table_pin_num));
+ gpio_table_pins = dev_read_u8_array_ptr(dev,
+ "fspm,pre-mem-gpio-table-pin-num",
+ sizeof(gpio_table_pins));
+ if (gpio_table_pins)
+ memcpy(cfg->pre_mem_gpio_table_pin_num, gpio_table_pins,
+ sizeof(gpio_table_pins));
+ cfg->pre_mem_gpio_table_ptr = dev_read_u32_default(dev,
+ "fspm,pre-mem-gpio-table-ptr",
+ 0);
+ cfg->pre_mem_gpio_table_entry_num = dev_read_u32_default(dev,
+ "fspm,pre-mem-gpio-table-entry-num",
+ 0);
+ cfg->enhance_port8xh_decoding = !dev_read_bool(dev,
+ "fspm,disable-enhance-port8xh-decoding");
+ cfg->spd_write_enable = dev_read_bool(dev, "fspm,enable-spd-write");
+ cfg->oem_loading_base = dev_read_u32_default(dev,
+ "fspm,oem-loading-base",
+ 0);
+ memset(cfg->oem_file_name, 0, sizeof(cfg->oem_file_name));
+ oem_file = dev_read_string(dev, "oem-file-name");
+ if (oem_file)
+ memcpy(cfg->oem_file_name, oem_file,
+ sizeof(cfg->oem_file_name));
+ cfg->mrc_data_saving = dev_read_bool(dev,
+ "fspm,enable_mrc-data-saving");
+ cfg->e_mmc_trace_len = dev_read_bool(dev, "emmc-trace-len-short");
+ cfg->skip_cse_rbp = dev_read_bool(dev, "fspm,enable-skip-cse-rbp");
+ cfg->npk_en = dev_read_u32_default(dev, "fspm,enable-npk", NPK_EN_AUTO);
+ cfg->fw_trace_en = !dev_read_bool(dev, "fspm,disable-fw-trace");
+ cfg->fw_trace_destination = dev_read_u32_default(dev,
+ "fspm,fw-trace-destination",
+ FW_TRACE_DESTINATION_NPK_TRACE_TO_PTI);
+ cfg->recover_dump = dev_read_bool(dev, "fspm,enable-recover-dump");
+ cfg->msc0_wrap = dev_read_u32_default(dev, "msc0-wrap", MSC_X_WRAP_1);
+ cfg->msc1_wrap = dev_read_u32_default(dev, "msc1-wrap", MSC_X_WRAP_1);
+ cfg->msc0_size = dev_read_u32_default(dev, "fspm,msc0-size",
+ MSC_X_SIZE_0M);
+ cfg->msc1_size = dev_read_u32_default(dev, "fspm,msc1-size",
+ MSC_X_SIZE_0M);
+ cfg->pti_mode = dev_read_u32_default(dev, "fspm,pti-mode", PTI_MODE_x4);
+ cfg->pti_training = dev_read_u32_default(dev, "fspm,pti-training", 0);
+ cfg->pti_speed = dev_read_u32_default(dev, "fspm,pti-speed",
+ PTI_SPEED_QUARTER);
+ cfg->punit_mlvl = dev_read_u32_default(dev, "fspm,punit-mlvl", 0);
+ cfg->pmc_mlvl = dev_read_u32_default(dev, "fspm,pmc-mlvl", 0);
+ cfg->sw_trace_en = dev_read_bool(dev, "fspm,enable-sw-trace");
+ cfg->periodic_retraining_disable = dev_read_bool(dev,
+ "fspm,disable-periodic-retraining");
+ cfg->enable_reset_system = dev_read_bool(dev, "enable-reset-system");
+ cfg->enable_s3_heci2 = !dev_read_bool(dev, "fspm,disable-s3-heci2");
return 0;
}
diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts
index af52e11c89..a205430abf 100644
--- a/arch/x86/dts/chromebook_coral.dts
+++ b/arch/x86/dts/chromebook_coral.dts
@@ -21,6 +21,7 @@
#include <asm/arch-apollolake/iomap.h>
#include <asm/arch-apollolake/pm.h>
#include <dt-bindings/clock/intel-clock.h>
+#include <asm/arch-apollolake/fsp/fsp_m_upd.h>
/ {
model = "Google Coral";
@@ -436,6 +437,40 @@
PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
>;
+ fspm,package = <PACKAGE_BGA>;
+ fspm,profile = <PROFILE_LPDDR4_2400_24_22_22>;
+ fspm,memory-down = <MEMORY_DOWN_YES>;
+ fspm,enable-scrambler-support;
+ fspm,enable-interleaved-mode = <INTERLEAVED_MODE_ENABLE>;
+ fspm,channel-hash-mask = <0x36>;
+ fspm,slice-hash-mask = <0x9>;
+ fspm,low-memory-max-value = <2048>;
+ fspm,ch0-enable-rank;
+ fspm,ch0-device-width = <CHX_DEVICE_WIDTH_X16>;
+ fspm,ch0-dram-density = <CHX_DEVICE_DENSITY_8GB>;
+ fspm,ch0-option = <(CHX_OPTION_RANK_INTERLEAVING |
+ CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
+ fspm,ch0-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
+ fspm,ch1-enable-rank;
+ fspm,ch1-device-width = <CHX_DEVICE_WIDTH_X16>;
+ fspm,ch1-dram-density = <CHX_DEVICE_DENSITY_8GB>;
+ fspm,ch1-option = <(CHX_OPTION_RANK_INTERLEAVING |
+ CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
+ fspm,ch1-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
+ fspm,ch2-enable-rank;
+ fspm,ch2-device-width = <CHX_DEVICE_WIDTH_X16>;
+ fspm,ch2-dram-density = <CHX_DEVICE_DENSITY_8GB>;
+ fspm,ch2-option = <(CHX_OPTION_RANK_INTERLEAVING |
+ CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
+ fspm,ch2-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
+ fspm,ch3-enable-rank;
+ fspm,ch3-device-width = <CHX_DEVICE_WIDTH_X16>;
+ fspm,ch3-dram-density = <CHX_DEVICE_DENSITY_8GB>;
+ fspm,ch3-option = <(CHX_OPTION_RANK_INTERLEAVING |
+ CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
+ fspm,ch3-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
+ fspm,enable-skip-cse-rbp;
+
lpddr4-swizzle = /bits/ 8 <
/* LP4_PHYS_CH0A */
diff --git a/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h b/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h
index 93bee5b2d1..de7cdacde4 100644
--- a/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h
+++ b/arch/x86/include/asm/arch-apollolake/fsp/fsp_m_upd.h
@@ -7,6 +7,7 @@
#ifndef __ASM_ARCH_FSP_M_UDP_H
#define __ASM_ARCH_FSP_M_UDP_H
+#ifndef __ASSEMBLY__
#include <asm/fsp2/fsp_api.h>
#define FSP_DRAM_CHANNELS 4
@@ -119,5 +120,166 @@ struct __packed fspm_upd {
u8 unused_upd_space2[158];
u16 upd_terminator;
};
+#endif
+
+#define SERIAL_DEBUG_PORT_TYPE_NONE 0
+#define SERIAL_DEBUG_PORT_TYPE_IO 1
+#define SERIAL_DEBUG_PORT_TYPE_MMIO 2
+
+#define SERIAL_DEBUG_PORT_DEVICE_UART0 0
+#define SERIAL_DEBUG_PORT_DEVICE_UART1 1
+#define SERIAL_DEBUG_PORT_DEVICE_UART2 2
+#define SERIAL_DEBUG_PORT_DEVICE_EXTERNAL 3
+
+#define SERIAL_DEBUG_PORT_STRIDE_SIZE_1 0
+#define SERIAL_DEBUG_PORT_STRIDE_SIZE_4 2
+
+#define IGD_DVMT_50_PRE_ALLOC_64M 0x02
+#define IGD_DVMT_50_PRE_ALLOC_96M 0x03
+#define IGD_DVMT_50_PRE_ALLOC_128M 0x04
+#define IGD_DVMT_50_PRE_ALLOC_160M 0x05
+#define IGD_DVMT_50_PRE_ALLOC_192M 0x06
+#define IGD_DVMT_50_PRE_ALLOC_224M 0x07
+#define IGD_DVMT_50_PRE_ALLOC_256M 0x08
+#define IGD_DVMT_50_PRE_ALLOC_288M 0x09
+#define IGD_DVMT_50_PRE_ALLOC_320M 0x0a
+#define IGD_DVMT_50_PRE_ALLOC_352M 0x0b
+#define IGD_DVMT_50_PRE_ALLOC_384M 0x0c
+#define IGD_DVMT_50_PRE_ALLOC_416M 0x0d
+#define IGD_DVMT_50_PRE_ALLOC_448M 0x0e
+#define IGD_DVMT_50_PRE_ALLOC_480M 0x0f
+#define IGD_DVMT_50_PRE_ALLOC_512M 0x10
+
+#define IGD_APERTURE_SIZE_128M 0x1
+#define IGD_APERTURE_SIZE_256M 0x2
+#define IGD_APERTURE_SIZE_512M 0x3
+
+#define GTT_SIZE_2M 1
+#define GTT_SIZE_4M 2
+#define GTT_SIZE_8M 3
+
+#define PRIMARY_VIDEO_ADAPTER_AUTO 0
+#define PRIMARY_VIDEO_ADAPTER_IGD 2
+#define PRIMARY_VIDEO_ADAPTER_PCI 3
+
+#define PACKAGE_SODIMM 0
+#define PACKAGE_BGA 1
+#define PACKAGE_BGA_MIRRORED 2
+#define PACKAGE_SODIMM_UDIMM_RANK_MIRRORED 3
+
+#define PROFILE_WIO2_800_7_8_8 0x1
+#define PROFILE_WIO2_1066_9_10_10 0x2
+#define PROFILE_LPDDR3_1066_8_10_10 0x3
+#define PROFILE_LPDDR3_1333_10_12_12 0x4
+#define PROFILE_LPDDR3_1600_12_15_15 0x5
+#define PROFILE_LPDDR3_1866_14_17_17 0x6
+#define PROFILE_LPDDR3_2133_16_20_20 0x7
+#define PROFILE_LPDDR4_1066_10_10_10 0x8
+#define PROFILE_LPDDR4_1600_14_15_15 0x9
+#define PROFILE_LPDDR4_2133_20_20_20 0xa
+#define PROFILE_LPDDR4_2400_24_22_22 0xb
+#define PROFILE_LPDDR4_2666_24_24_24 0xc
+#define PROFILE_LPDDR4_2933_28_27_27 0xd
+#define PROFILE_LPDDR4_3200_28_29_29 0xe
+#define PROFILE_DDR3_1066_6_6_6 0xf
+#define PROFILE_DDR3_1066_7_7_7 0x10
+#define PROFILE_DDR3_1066_8_8_8 0x11
+#define PROFILE_DDR3_1333_7_7_7 0x12
+#define PROFILE_DDR3_1333_8_8_8 0x13
+#define PROFILE_DDR3_1333_9_9_9 0x14
+#define PROFILE_DDR3_1333_10_10_10 0x15
+#define PROFILE_DDR3_1600_8_8_8 0x16
+#define PROFILE_DDR3_1600_9_9_9 0x17
+#define PROFILE_DDR3_1600_10_10_10 0x18
+#define PROFILE_DDR3_1600_11_11_11 0x19
+#define PROFILE_DDR3_1866_10_10_10 0x1a
+#define PROFILE_DDR3_1866_11_11_11 0x1b
+#define PROFILE_DDR3_1866_12_12_12 0x1c
+#define PROFILE_DDR3_1866_13_13_13 0x1d
+#define PROFILE_DDR3_2133_11_11_11 0x1e
+#define PROFILE_DDR3_2133_12_12_12 0x1f
+#define PROFILE_DDR3_2133_13_13_13 0x20
+#define PROFILE_DDR3_2133_14_14_14 0x21
+#define PROFILE_DDR4_1333_10_10_10 0x22
+#define PROFILE_DDR4_1600_10_10_10 0x23
+#define PROFILE_DDR4_1600_11_11_11 0x24
+#define PROFILE_DDR4_1600_12_12_12 0x25
+#define PROFILE_DDR4_1866_12_12_12 0x26
+#define PROFILE_DDR4_1866_13_13_13 0x27
+#define PROFILE_DDR4_1866_14_14_14 0x28
+#define PROFILE_DDR4_2133_14_14_14 0x29
+#define PROFILE_DDR4_2133_15_15_15 0x2a
+#define PROFILE_DDR4_2133_16_16_16 0x2b
+#define PROFILE_DDR4_2400_15_15_15 0x2c
+#define PROFILE_DDR4_2400_16_16_16 0x2d
+#define PROFILE_DDR4_2400_17_17_17 0x2e
+#define PROFILE_DDR4_2400_18_18_18 0x2f
+
+#define MEMORY_DOWN_NO 0
+#define MEMORY_DOWN_YES 1
+#define MEMORY_DOWN_MD_SODIMM 2
+#define MEMORY_DOWN_LPDDR4 3
+
+#define INTERLEAVED_MODE_DISABLE 0
+#define INTERLEAVED_MODE_ENABLE 2
+
+#define RMT_MODE_DISABLE 0
+#define RMT_MODE_ENABLE 3
+
+#define CHX_DEVICE_WIDTH_X8 0
+#define CHX_DEVICE_WIDTH_X16 1
+#define CHX_DEVICE_WIDTH_X32 2
+#define CHX_DEVICE_WIDTH_X64 3
+
+#define CHX_DEVICE_DENSITY_4GB 0
+#define CHX_DEVICE_DENSITY_6GB 1
+#define CHX_DEVICE_DENSITY_8GB 2
+#define CHX_DEVICE_DENSITY_12GB 3
+#define CHX_DEVICE_DENSITY_16GB 4
+#define CHX_DEVICE_DENSITY_2GB 5
+
+#define CHX_OPTION_RANK_INTERLEAVING 0x1
+#define CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE 0x2
+#define CHX_OPTION_CH1_CLK_DISABLE 0x4
+#define CHX_OPTION_ADDRESS_MAP_2KB 0x10
+
+#define CHX_ODT_CONFIG_DDR3_RX_ODT 0x1
+#define CHX_ODT_CONFIG_DDR4_CA_ODT 0x2
+#define CHX_ODT_CONFIG_DDR3L_TX_ODT 0x10
+
+#define CHX_ODT_LEVELS_CONNECTED_TO_SOC 0x0
+#define CHX_ODT_LEVELS_HELD_HIGH 0x1
+
+#define NPK_EN_DISABLE 0
+#define NPK_EN_ENABLE 1
+#define NPK_EN_DEBUGGER 2
+#define NPK_EN_AUTO 3
+
+#define FW_TRACE_DESTINATION_NPK_TRACE_TO_MEMORY 1
+#define FW_TRACE_DESTINATION_NPK_TRACE_TO_DCI 2
+#define FW_TRACE_DESTINATION_NPK_NPK_TRACE_TO_BSSB 3
+#define FW_TRACE_DESTINATION_NPK_TRACE_TO_PTI 4
+
+#define MSC_X_WRAP_0 0
+#define MSC_X_WRAP_1 1
+
+#define MSC_X_SIZE_0M 0
+#define MSC_X_SIZE_1M 1
+#define MSC_X_SIZE_8M 2
+#define MSC_X_SIZE_64M 3
+#define MSC_X_SIZE_128M 4
+#define MSC_X_SIZE_256M 5
+#define MSC_X_SIZE_512M 6
+#define MSC_X_SIZE_1GB 7
+
+#define PTI_MODE_0 0
+#define PTI_MODE_x4 1
+#define PTI_MODE_x8 2
+#define PTI_MODE_x12 3
+#define PTI_MODE_x16 4
+
+#define PTI_SPEED_FULL 0
+#define PTI_SPEED_HALF 1
+#define PTI_SPEED_QUARTER 2
#endif
--
2.25.1
More information about the U-Boot
mailing list