[PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL

[Lukasz Majewski]

On Sun, 8 Mar 2020 22:05:42 +0100
Giulio Benetti <giulio.benetti at benettiengineering.com> wrote:

> Hi Lukasz,
> 
> On 3/8/20 9:27 PM, Lukasz Majewski wrote:
> > On Wed, 26 Feb 2020 18:15:46 +0100
> > Giulio Benetti <giulio.benetti at benettiengineering.com> wrote:
> >   
> >> mxsfb needs PLL5 as source, so let's setup it and set it as source
> >> for mxsfb(lcdif).
> >>
> >> Signed-off-by: Giulio Benetti
> >> <giulio.benetti at benettiengineering.com> ---
> >>   drivers/clk/imx/clk-imxrt1050.c | 13 ++++++++++++-
> >>   1 file changed, 12 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/clk/imx/clk-imxrt1050.c
> >> b/drivers/clk/imx/clk-imxrt1050.c index e33d426363..2819ffb9ac
> >> 100644 --- a/drivers/clk/imx/clk-imxrt1050.c
> >> +++ b/drivers/clk/imx/clk-imxrt1050.c
> >> @@ -238,9 +238,9 @@ static int imxrt1050_clk_probe(struct udevice
> >> *dev) clk_dm(IMXRT1050_CLK_LCDIF,
> >>   	       imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70,
> >> 28));
> >> -#ifdef CONFIG_SPL_BUILD
> >>   	struct clk *clk, *clk1;
> >>   
> >> +#ifdef CONFIG_SPL_BUILD
> >>   	/* bypass pll1 before setting its rate */
> >>   	clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk);
> >>   	clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
> >> @@ -271,7 +271,18 @@ static int imxrt1050_clk_probe(struct udevice
> >> *dev)
> >>   	clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1);
> >>   	clk_set_parent(clk1, clk);
> >> +#else
> >> +	/* Set PLL5 for LCDIF to its default 650Mhz */
> >> +	clk_get_by_id(IMXRT1050_CLK_PLL5_VIDEO, &clk);
> >> +	clk_enable(clk);
> >> +	clk_set_rate(clk, 650000000UL);
> >> +
> >> +	clk_get_by_id(IMXRT1050_CLK_PLL5_BYPASS, &clk1);
> >> +	clk_set_parent(clk1, clk);
> >>   
> >> +	/* Configure PLL5 as LCDIF source */
> >> +	clk_get_by_id(IMXRT1050_CLK_LCDIF_SEL, &clk1);
> >> +	clk_set_parent(clk1, clk);  
> 
> As pointed by Fabio, this ^^^ should be substituted with a using 
> assigned-parent-clocks in dts instead of being hardcoded here.

Upss.. Apparently I've missed the conversation. Thanks for pointing
this out.

> What do you think about it?

If it is relatively easy to do then I'm for it.

> 
> Thanks for reviewing and
> best regards




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200309/5b3fddc6/attachment.sig>