[PATCH 17/18] stm32mp: stm32prog: support for script

[Patrick Delaunay]

Support an U-Boot script included in uimage instead of flashlayout file
(text file in tsv format).

This feature is used to execute this script directly when U-Boot is
loaded in DDR (for update without STM32CubeProgrammer for example).

A simple example with dfu-util only is:

$> echo "dfu 0" > script.cmd
$> mkimage -C none -A arm -T script -d script.cmd script.uimg
$> mkimage -T stm32image -a 0xC0000000 -e 0xC0000000 -d script.uimg \
  script.stm32

$> dfu-util -d 0483:df11 -a 1 -D tf-a.stm32
$> dfu-util -d 0483:df11 -a 0 -D script.stm32
$> dfu-util -d 0483:df11 -a 0 -D u-boot.stm32
$> dfu-util -d 0483:df11 -a 0 -e

Then you can used dfu-utils to update your device

To increase speed, you can also switch to fastboot protocol with:
  echo "fastboot 0" > script.cmd

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 .../arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
index 15bbdc2cb6..baf9b6bd1e 100644
--- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
+++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c
@@ -6,6 +6,7 @@
 #include <common.h>
 #include <command.h>
 #include <dfu.h>
+#include <image.h>
 #include <asm/arch/stm32prog.h>
 #include "stm32prog.h"
 
@@ -44,6 +45,7 @@ static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc,
 	int dev, ret;
 	enum stm32prog_link_t link = LINK_UNDEFINED;
 	bool reset = false;
+	struct image_header_s header;
 	struct stm32prog_data *data;
 
 	if (argc < 3 ||  argc > 5)
@@ -71,6 +73,18 @@ static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc,
 	if (argc > 4)
 		size = simple_strtoul(argv[4], NULL, 16);
 
+	/* check STM32IMAGE presence */
+	if (size == 0 &&
+	    !stm32prog_header_check((struct raw_header_s *)addr, &header)) {
+		size = header.image_length + BL_HEADER_SIZE;
+
+		/* uImage detected in STM32IMAGE, execute the script */
+		if (IMAGE_FORMAT_LEGACY ==
+		    genimg_get_format((void *)(addr + BL_HEADER_SIZE)))
+			return image_source_script(addr + BL_HEADER_SIZE,
+						   "script at 1");
+	}
+
 	enable_vidconsole();
 
 	data = (struct stm32prog_data *)malloc(sizeof(*data));
-- 
2.17.1