[PATCH V3 11/13] net: smc911x: Clean up the status handling in smc911x_recv()
Marek Vasut
marek.vasut at gmail.com
Wed Mar 25 16:36:46 CET 2020
Invert the status handling logic in smc911x_recv(), to make the
function easier to read, no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
---
V2: Simplify RX_FIFO_INF_RXSUSED mask handling
s at Invest@Invert@
V3: No change
---
drivers/net/smc911x.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 786ab220b2..4a1145e641 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -352,23 +352,25 @@ static int smc911x_recv(struct eth_device *dev)
u32 pktlen, tmplen;
u32 status;
- if ((smc911x_reg_read(priv, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
- status = smc911x_reg_read(priv, RX_STATUS_FIFO);
- pktlen = (status & RX_STS_PKT_LEN) >> 16;
+ status = smc911x_reg_read(priv, RX_FIFO_INF);
+ if (!(status & RX_FIFO_INF_RXSUSED))
+ return 0;
- smc911x_reg_write(priv, RX_CFG, 0);
+ status = smc911x_reg_read(priv, RX_STATUS_FIFO);
+ pktlen = (status & RX_STS_PKT_LEN) >> 16;
- tmplen = (pktlen + 3) / 4;
- while (tmplen--)
- *data++ = smc911x_reg_read(priv, RX_DATA_FIFO);
+ smc911x_reg_write(priv, RX_CFG, 0);
- if (status & RX_STS_ES)
- printf(DRIVERNAME
- ": dropped bad packet. Status: 0x%08x\n",
- status);
- else
- net_process_received_packet(net_rx_packets[0], pktlen);
- }
+ tmplen = (pktlen + 3) / 4;
+ while (tmplen--)
+ *data++ = smc911x_reg_read(priv, RX_DATA_FIFO);
+
+ if (status & RX_STS_ES)
+ printf(DRIVERNAME
+ ": dropped bad packet. Status: 0x%08x\n",
+ status);
+ else
+ net_process_received_packet(net_rx_packets[0], pktlen);
return 0;
}
--
2.25.1
More information about the U-Boot
mailing list