[PATCH v6 5/5] usb: host: dwc2: add trace to have clean usb start

[Patrick Delaunay]

Solve issue for the display of "usb start" command on stm32mp1
because one carriage return is missing in DWC2 probe.

Before the patch:

STM32MP> usb start
starting USB...
Bus usb-otg at 49000000:    Bus usbh-ehci at 5800d000:   USB EHCI 1.00

after the patch:

STM32MP> usb start
starting USB...
Bus usb-otg at 49000000: USB DWC2
Bus usbh-ehci at 5800d000: USB EHCI 1.00

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/usb/host/dwc2.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 640ae3e730..f25ed2dab0 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -1219,6 +1219,8 @@ static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
 	if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
 		mdelay(1000);
 
+	printf("USB DWC2\n");
+
 	return 0;
 }
 
-- 
2.17.1