[PATCH v2 09/14] arm: dts: lx2160ardb: add DPMAC and PHY nodes

[Ioana Ciornei]

In order to maintain compatibility with the Linux DTS, the entire fsl-mc
node is added but instead of being probed by a dedicated bus driver it
will be a simple-mfd.

Also, annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs and
the 2 AQR107 PHYs. Also, add phy-handles for the dpmacs to their
associated PHY.

Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
Changes in v2:
 - none

 arch/arm/dts/fsl-lx2160a-rdb.dts | 52 ++++++++++++++++++++++++++++++++
 arch/arm/dts/fsl-lx2160a.dtsi    | 45 +++++++++++++++++++++++++++
 2 files changed, 97 insertions(+)

diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index e542c6992ab8..584744368394 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -21,6 +21,58 @@
 	};
 };
 
+&dpmac3 {
+	status = "okay";
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac4 {
+	status = "okay";
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+};
+
+&dpmac17 {
+	status = "okay";
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	status = "okay";
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+	rgmii_phy1: ethernet-phy at 1 {
+		/* AR8035 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		/* Poll mode - no "interrupts" property defined */
+	};
+	rgmii_phy2: ethernet-phy at 2 {
+		/* AR8035 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		/* Poll mode - no "interrupts" property defined */
+	};
+	aquantia_phy1: ethernet-phy at 4 {
+		/* AQR107 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x4>;
+	};
+	aquantia_phy2: ethernet-phy at 5 {
+		/* AQR107 PHY - "compatible" property not strictly needed */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5>;
+	};
+};
+
 &esdhc0 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 15f18bc4a5f7..17ecdc569b37 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -364,6 +364,51 @@
 		ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>;
 	};
 
+	fsl_mc: fsl-mc at 80c000000 {
+		compatible = "fsl,qoriq-mc", "simple-mfd";
+		reg = <0x00000008 0x0c000000 0 0x40>,
+		      <0x00000000 0x08340000 0 0x40000>;
+		#address-cells = <3>;
+		#size-cells = <1>;
+
+		/*
+		 * Region type 0x0 - MC portals
+		 * Region type 0x1 - QBMAN portals
+		 */
+		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+		dpmacs {
+			compatible = "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dpmac3: dpmac at 3 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x3>;
+				status = "disabled";
+			};
+
+			dpmac4: dpmac at 4 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x4>;
+				status = "disabled";
+			};
+
+			dpmac17: dpmac at 11 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x11>;
+				status = "disabled";
+			};
+
+			dpmac18: dpmac at 12 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0x12>;
+				status = "disabled";
+			};
+		};
+	};
+
 	/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
 	emdio1: mdio at 8b96000 {
 		compatible = "fsl,ls-mdio";
-- 
2.17.1