[PATCH 3/3] configs:stm32mp1: activate env config in SPL
Patrick Delaunay
patrick.delaunay at st.com
Thu Mar 19 11:21:14 CET 2020
Activate env config in SPL with CONFIG_SPL_ENV_SUPPORT
and use CONFIG_IS_ENABLED macro to test the activated
CONFIG_$(SPL_)ENV_IS_IN_... in env_get_location.
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
board/st/stm32mp1/stm32mp1.c | 8 ++++----
configs/stm32mp15_basic_defconfig | 3 +++
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index effba41ad1..474033d640 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -785,21 +785,21 @@ enum env_location env_get_location(enum env_operation op, int prio)
return ENVL_UNKNOWN;
switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
-#ifdef CONFIG_ENV_IS_IN_MMC
+#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC)
case BOOT_FLASH_SD:
case BOOT_FLASH_EMMC:
return ENVL_MMC;
#endif
-#ifdef CONFIG_ENV_IS_IN_EXT4
+#if CONFIG_IS_ENABLED(ENV_IS_IN_EXT4)
case BOOT_FLASH_SD:
case BOOT_FLASH_EMMC:
return ENVL_EXT4;
#endif
-#ifdef CONFIG_ENV_IS_IN_UBI
+#if CONFIG_IS_ENABLED(ENV_IS_IN_UBI)
case BOOT_FLASH_NAND:
return ENVL_UBI;
#endif
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#if CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH)
case BOOT_FLASH_NOR:
return ENVL_SPI_FLASH;
#endif
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index dd55a8b632..c63002628c 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -16,6 +16,7 @@ CONFIG_FIT=y
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
+CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
@@ -63,6 +64,8 @@ CONFIG_ENV_UBI_PART="UBI"
CONFIG_ENV_UBI_VOLUME="uboot_config"
CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_SPL_ENV_IS_NOWHERE is not set
+# CONFIG_SPL_ENV_IS_IN_SPI_FLASH is not set
CONFIG_STM32_ADC=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
--
2.17.1
More information about the U-Boot
mailing list