[PATCH 5/9] ram: stm32mp1: tuning: deactivate derating during BIST test

[Patrick DELAUNAY]

Hi,

> From: Patrick DELAUNAY <patrick.delaunay at st.com>
> Sent: vendredi 6 mars 2020 11:14
> 
> The derating (timing parameter derating using MR4 read value) can't be activated
> during BIST test, as the MR4 read answer will be not understood by BIST
> (BISTGSR.BDONE bit stay at 0, BISTWCSR.DXWCNT = 0x206 instead of
> BISTWCR.BWCNT = 0x200).
> 
> This patch only impacts the tuning on LPDDR2/LPDDR3, if
> derateen.derate_enable = 1.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---

Applied to u-boot-stm/next, thanks!

Regards

Patrick