[PATCH 1/2] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7

[Marek Vasut]

On 3/30/20 12:48 PM, Patrice CHOTARD wrote:
> Hi Marek

Hi,

> On 3/26/20 10:00 PM, Marek Vasut wrote:
>> Add another mux option for SDMMC2 pins 4..7, this is used on AV96 board.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>> Cc: Patrice Chotard <patrice.chotard at st.com>
>> ---
>>  arch/arm/dts/stm32mp157-pinctrl.dtsi | 21 +++++++++++++++++++++
>>  1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
>> index 81a363d93d..e25c44760e 100644
>> --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
>> +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
>> @@ -907,6 +907,27 @@
>>  				};
>>  			};
>>  
>> +			sdmmc2_d47_pins_b: sdmmc2-d47-1 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
>> +						 <STM32_PINMUX('A', 15, AF10)>, /* SDMMC2_D5 */
>> +						 <STM32_PINMUX('C', 6, AF9)>, /* SDMMC2_D6 */
>> +						 <STM32_PINMUX('C', 7, AF9)>; /* SDMMC2_D7 */
>> +					slew-rate = <1>;
>> +					drive-push-pull;
>> +					bias-pull-up;
>> +				};
>> +			};
>> +

Actually, this one is wrong, the AFs are wrong. Lemme send a V2.
The rest of the patches should be OK. Sorry for the mess up.