[PATCH 02/14] drivers: net: ldpaa: add support for probing based on the DTS

Joe Hershberger joe.hershberger at ni.com
Tue Mar 17 23:52:24 CET 2020


On Thu, Mar 12, 2020 at 11:26 AM Ioana Ciornei <ioana.ciornei at nxp.com> wrote:
>
> When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe
> based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible.
> In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver
> and reuse the _open()/_tx()/_stop() functions already inplemented.
>
> For the moment, the ldpaa_eth driver will support both configurations:
> with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence
> now has a matching 'struct udevice' made mutually exclusive based on the
> state of CONFIG_DM_ETH.
>
> Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita at nxp.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
> ---
>  drivers/net/ldpaa_eth/ldpaa_eth.c | 230 +++++++++++++++++++++++++-----
>  drivers/net/ldpaa_eth/ldpaa_eth.h |   6 +
>  2 files changed, 204 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c
> index a3b9c152b256..bbfe479ed1c9 100644
> --- a/drivers/net/ldpaa_eth/ldpaa_eth.c
> +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
> @@ -12,6 +12,7 @@
>  #include <net.h>
>  #include <hwconfig.h>
>  #include <phy.h>
> +#include <miiphy.h>
>  #include <linux/compat.h>
>  #include <fsl-mc/fsl_dpmac.h>
>
> @@ -19,6 +20,7 @@
>  #include "ldpaa_eth.h"
>
>  #ifdef CONFIG_PHYLIB
> +#ifndef CONFIG_DM_ETH

Please use positive logic here and throughout. Add the DM code here
before the non-DM code.

>  static int init_phy(struct eth_device *dev)
>  {
>         struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv;
> @@ -62,6 +64,19 @@ static int init_phy(struct eth_device *dev)
>
>         return ret;
>  }
> +#else
> +static void init_phy(struct udevice *dev)
> +{
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +
> +       priv->phy = dm_eth_phy_connect(dev);
> +
> +       if (!priv->phy)
> +               return;
> +
> +       phy_config(priv->phy);
> +}
> +#endif
>  #endif
>
>  #ifdef DEBUG
> @@ -128,9 +143,15 @@ static void ldpaa_eth_get_dpni_counter(void)
>         }
>  }
>
> +#ifdef CONFIG_DM_ETH
> +static void ldpaa_eth_get_dpmac_counter(struct udevice *dev)
> +{
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +#else
>  static void ldpaa_eth_get_dpmac_counter(struct eth_device *net_dev)
>  {
>         struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv;
> +#endif
>         int err = 0;
>         u64 value;
>
> @@ -263,9 +284,16 @@ error:
>         return;
>  }
>
> +#ifdef CONFIG_DM_ETH
> +static int ldpaa_eth_pull_dequeue_rx(struct udevice *dev,
> +                                    int flags, uchar **packetp)
> +{
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +#else
>  static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev)
>  {
>         struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)dev->priv;
> +#endif
>         const struct ldpaa_dq *dq;
>         const struct dpaa_fd *fd;
>         int i = 5, err = 0, status;
> @@ -322,9 +350,15 @@ static int ldpaa_eth_pull_dequeue_rx(struct eth_device *dev)
>         return err;
>  }
>
> +#ifdef CONFIG_DM_ETH
> +static int ldpaa_eth_tx(struct udevice *dev, void *buf, int len)
> +{
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +#else
>  static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len)
>  {
>         struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv;
> +#endif
>         struct dpaa_fd fd;
>         u64 buffer_start;
>         int data_offset, err;
> @@ -400,15 +434,32 @@ error:
>         return err;
>  }
>
> +static struct phy_device *ldpaa_get_phydev(struct ldpaa_eth_priv *priv)
> +{
> +#ifdef CONFIG_DM_ETH
> +       return priv->phy;
> +#else
> +#ifdef CONFIG_PHYLIB
> +       struct phy_device *phydev = NULL;
> +       int phy_num;
> +
> +       /* start the phy devices one by one and update the dpmac state */
> +       for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
> +               phydev = wriop_get_phy_dev(priv->dpmac_id, phy_num);
> +               if (phydev)
> +                       return phydev;
> +       }
> +       return NULL;
> +#endif
> +#endif
> +}
> +
>  static int ldpaa_get_dpmac_state(struct ldpaa_eth_priv *priv,
>                                  struct dpmac_link_state *state)
>  {
>         phy_interface_t enet_if;
> -       int phys_detected;
> -#ifdef CONFIG_PHYLIB
>         struct phy_device *phydev = NULL;
> -       int err, phy_num;
> -#endif
> +       int err;
>
>         /* let's start off with maximum capabilities */
>         enet_if = wriop_get_enet_if(priv->dpmac_id);
> @@ -420,39 +471,28 @@ static int ldpaa_get_dpmac_state(struct ldpaa_eth_priv *priv,
>                 state->rate = SPEED_1000;
>                 break;
>         }
> -       state->up = 1;
>
> -       phys_detected = 0;
> -#ifdef CONFIG_PHYLIB
> +       state->up = 1;
>         state->options |= DPMAC_LINK_OPT_AUTONEG;
> +       phydev = ldpaa_get_phydev(priv);
>
> -       /* start the phy devices one by one and update the dpmac state */
> -       for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
> -               phydev = wriop_get_phy_dev(priv->dpmac_id, phy_num);
> -               if (!phydev)
> -                       continue;
> -
> -               phys_detected++;
> +       if (phydev) {
>                 err = phy_startup(phydev);
>                 if (err) {
>                         printf("%s: Could not initialize\n", phydev->dev->name);
>                         state->up = 0;
> -                       break;
> -               }
> -               if (phydev->link) {
> +               } else if (phydev->link) {
>                         state->rate = min(state->rate, (uint32_t)phydev->speed);
>                         if (!phydev->duplex)
>                                 state->options |= DPMAC_LINK_OPT_HALF_DUPLEX;
>                         if (!phydev->autoneg)
>                                 state->options &= ~DPMAC_LINK_OPT_AUTONEG;
>                 } else {
> -                       /* break out of loop even if one phy is down */
>                         state->up = 0;
> -                       break;
>                 }
>         }
> -#endif
> -       if (!phys_detected)
> +
> +       if (!phydev)
>                 state->options &= ~DPMAC_LINK_OPT_AUTONEG;
>
>         if (!state->up) {
> @@ -464,9 +504,16 @@ static int ldpaa_get_dpmac_state(struct ldpaa_eth_priv *priv,
>         return 0;
>  }
>
> +#ifdef CONFIG_DM_ETH
> +static int ldpaa_eth_open(struct udevice *dev)
> +{
> +       struct eth_pdata *plat = dev_get_platdata(dev);
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +#else
>  static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
>  {
>         struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv;
> +#endif
>         struct dpmac_link_state dpmac_link_state = { 0 };
>  #ifdef DEBUG
>         struct dpni_link_state link_state;
> @@ -474,8 +521,13 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
>         int err = 0;
>         struct dpni_queue d_queue;
>
> +#ifdef CONFIG_DM_ETH
> +       if (eth_is_active(dev))
> +               return 0;
> +#else
>         if (net_dev->state == ETH_STATE_ACTIVE)
>                 return 0;
> +#endif
>
>         if (get_mc_boot_status() != 0) {
>                 printf("ERROR (MC is not booted)\n");
> @@ -515,8 +567,13 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd)
>         if (err)
>                 goto err_dpni_bind;
>
> +#ifdef CONFIG_DM_ETH
> +       err = dpni_add_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS,
> +                               dflt_dpni->dpni_handle, plat->enetaddr);
> +#else
>         err = dpni_add_mac_addr(dflt_mc_io, MC_CMD_NO_FLAGS,
>                                 dflt_dpni->dpni_handle, net_dev->enetaddr);
> +#endif
>         if (err) {
>                 printf("dpni_add_mac_addr() failed\n");
>                 return err;
> @@ -589,22 +646,34 @@ err_dpmac_setup:
>         return err;
>  }
>
> +#ifdef CONFIG_DM_ETH
> +static void ldpaa_eth_stop(struct udevice *dev)
> +{
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +#else
>  static void ldpaa_eth_stop(struct eth_device *net_dev)
>  {
>         struct ldpaa_eth_priv *priv = (struct ldpaa_eth_priv *)net_dev->priv;
> -       int err = 0;
> -#ifdef CONFIG_PHYLIB
> -       struct phy_device *phydev = NULL;
> -       int phy_num;
>  #endif
> +       struct phy_device *phydev = NULL;
> +       int err = 0;
>
> +#ifdef CONFIG_DM_ETH
> +       if (!eth_is_active(dev))
> +               return;
> +#else
>         if ((net_dev->state == ETH_STATE_PASSIVE) ||
>             (net_dev->state == ETH_STATE_INIT))
>                 return;
> +#endif
>
>  #ifdef DEBUG
>         ldpaa_eth_get_dpni_counter();
> +#ifdef CONFIG_DM_ETH
> +       ldpaa_eth_get_dpmac_counter(dev);
> +#else
>         ldpaa_eth_get_dpmac_counter(net_dev);
> +#endif
>  #endif
>
>         err = dprc_disconnect(dflt_mc_io, MC_CMD_NO_FLAGS,
> @@ -628,13 +697,9 @@ static void ldpaa_eth_stop(struct eth_device *net_dev)
>         if (err < 0)
>                 printf("dpni_disable() failed\n");
>
> -#ifdef CONFIG_PHYLIB
> -       for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
> -               phydev = wriop_get_phy_dev(priv->dpmac_id, phy_num);
> -               if (phydev)
> -                       phy_shutdown(phydev);
> -       }
> -#endif
> +       phydev = ldpaa_get_phydev(priv);
> +       if (phydev)
> +               phy_shutdown(phydev);
>
>         /* Free DPBP handle and reset. */
>         ldpaa_dpbp_free();
> @@ -1027,6 +1092,7 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv)
>         return 0;
>  }
>
> +#ifndef CONFIG_DM_ETH

Use positive logic

>  static int ldpaa_eth_netdev_init(struct eth_device *net_dev,
>                                  phy_interface_t enet_if)
>  {
> @@ -1099,3 +1165,103 @@ err_netdev_init:
>
>         return err;
>  }
> +#else
> +
> +static int ldpaa_eth_probe(struct udevice *dev)
> +{
> +       struct ofnode_phandle_args phandle;
> +
> +       /* Nothing to do if there is no "phy-handle" in the DTS node */
> +       if (dev_read_phandle_with_args(dev, "phy-handle", NULL,
> +                                      0, 0, &phandle)) {
> +               return 0;
> +       }
> +
> +       init_phy(dev);
> +
> +       return 0;
> +}
> +
> +static uint32_t ldpaa_eth_get_dpmac_id(struct udevice *dev)
> +{
> +       int port_node = dev_of_offset(dev);
> +
> +       return fdtdec_get_uint(gd->fdt_blob, port_node, "reg", -1);
> +}
> +
> +static const char *ldpaa_eth_get_phy_mode_str(struct udevice *dev)
> +{
> +       int port_node = dev_of_offset(dev);
> +       const char *phy_mode_str;
> +
> +       phy_mode_str = fdt_getprop(gd->fdt_blob, port_node,
> +                                  "phy-connection-type", NULL);
> +       if (phy_mode_str)
> +               return phy_mode_str;
> +
> +       phy_mode_str = fdt_getprop(gd->fdt_blob, port_node, "phy-mode", NULL);
> +       return phy_mode_str;
> +}
> +
> +static int ldpaa_eth_bind(struct udevice *dev)
> +{
> +       const char *phy_mode_str = NULL;
> +       uint32_t dpmac_id;
> +       char eth_name[16];
> +       int phy_mode = -1;
> +
> +       phy_mode_str = ldpaa_eth_get_phy_mode_str(dev);
> +       if (phy_mode_str)
> +               phy_mode = phy_get_interface_by_name(phy_mode_str);
> +       if (phy_mode == -1) {
> +               dev_err(dev, "incorrect phy mode\n");
> +               return -EINVAL;
> +       }
> +
> +       dpmac_id = ldpaa_eth_get_dpmac_id(dev);
> +       if (dpmac_id == -1) {
> +               dev_err(dev, "missing reg field from the dpmac node\n");
> +               return -EINVAL;
> +       }
> +
> +       sprintf(eth_name, "DPMAC%d@%s", dpmac_id, phy_mode_str);
> +       device_set_name(dev, eth_name);
> +
> +       return 0;
> +}
> +
> +static int ldpaa_eth_ofdata_to_platdata(struct udevice *dev)
> +{
> +       struct ldpaa_eth_priv *priv = dev_get_priv(dev);
> +       const char *phy_mode_str;
> +
> +       priv->dpmac_id = ldpaa_eth_get_dpmac_id(dev);
> +       phy_mode_str = ldpaa_eth_get_phy_mode_str(dev);
> +       priv->phy_mode = phy_get_interface_by_name(phy_mode_str);
> +
> +       return 0;
> +}
> +
> +static const struct eth_ops ldpaa_eth_ops = {
> +       .start  = ldpaa_eth_open,
> +       .send   = ldpaa_eth_tx,
> +       .recv   = ldpaa_eth_pull_dequeue_rx,
> +       .stop   = ldpaa_eth_stop,
> +};
> +
> +static const struct udevice_id ldpaa_eth_of_ids[] = {
> +       { .compatible = "fsl,qoriq-mc-dpmac" },
> +};
> +
> +U_BOOT_DRIVER(ldpaa_eth) = {
> +       .name = "ldpaa_eth",
> +       .id = UCLASS_ETH,
> +       .of_match = ldpaa_eth_of_ids,
> +       .ofdata_to_platdata = ldpaa_eth_ofdata_to_platdata,
> +       .bind = ldpaa_eth_bind,
> +       .probe = ldpaa_eth_probe,
> +       .ops = &ldpaa_eth_ops,
> +       .priv_auto_alloc_size = sizeof(struct ldpaa_eth_priv),
> +       .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> +};
> +#endif
> diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.h b/drivers/net/ldpaa_eth/ldpaa_eth.h
> index 3f9154b5bbcd..181b470da01b 100644
> --- a/drivers/net/ldpaa_eth/ldpaa_eth.h
> +++ b/drivers/net/ldpaa_eth/ldpaa_eth.h
> @@ -116,7 +116,13 @@ struct ldpaa_fas {
>                                          LDPAA_ETH_FAS_TIDE)
>
>  struct ldpaa_eth_priv {
> +#ifndef CONFIG_DM_ETH

Use positive logic

>         struct eth_device *net_dev;
> +#else
> +       struct phy_device *phy;
> +       int phy_mode;
> +       bool started;
> +#endif
>         uint32_t dpmac_id;
>         uint16_t dpmac_handle;
>
> --
> 2.17.1
>


More information about the U-Boot mailing list