[PATCH] armv8: ls1028a: add dhcp boot target device

[Priyanka Jain (OSS)]

>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of
>andy.tang at nxp.com
>Sent: Tuesday, March 10, 2020 9:01 AM
>To: Priyanka Jain <priyanka.jain at nxp.com>
>Cc: Sudhanshu Gupta <sudhanshu.gupta at nxp.com>; u-boot at lists.denx.de;
>Andy Tang <andy.tang at nxp.com>
>Subject: [PATCH] armv8: ls1028a: add dhcp boot target device
>
>From: Yuantian Tang <andy.tang at nxp.com>
>
>Add DHCP boot target device to enable command bootcmd_dhcp.
>
>Signed-off-by: Yuantian Tang <andy.tang at nxp.com>
>---
> include/configs/ls1028a_common.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
>diff --git a/include/configs/ls1028a_common.h
>b/include/configs/ls1028a_common.h
>index 98320e22e9..94ba08acb4 100644
>--- a/include/configs/ls1028a_common.h
>+++ b/include/configs/ls1028a_common.h
>@@ -70,7 +70,8 @@
> #define BOOT_TARGET_DEVICES(func) \
> 	func(MMC, mmc, 0) \
> 	func(MMC, mmc, 1) \
>-	func(USB, usb, 0)
>+	func(USB, usb, 0) \
>+	func(DHCP, dhcp, na)
> #include <config_distro_bootcmd.h>
>
> /* Initial environment variables */
>--
>2.17.1
Reviewed-by: Priyanka Jain <priyanka.jain at nxp.com>