[PATCH 3/6] net: dwc_eth_qos: Flush the RX descriptors on init

[Marek Vasut]

Currently the code only flushes the first RX descriptor, not every entry
in the RX descriptor ring. Fix this, to make sure the DMA engine can pick
the RX descriptors correctly.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: Stephen Warren <swarren at nvidia.com>
---
 drivers/net/dwc_eth_qos.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index c4f665bda9..66cc301c8c 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -1243,8 +1243,8 @@ static int eqos_start(struct udevice *dev)
 		rx_desc->des0 = (u32)(ulong)(eqos->rx_dma_buf +
 					     (i * EQOS_MAX_PACKET_SIZE));
 		rx_desc->des3 = EQOS_DESC3_OWN | EQOS_DESC3_BUF1V;
+		eqos->config->ops->eqos_flush_desc(rx_desc);
 	}
-	eqos->config->ops->eqos_flush_desc(eqos->descs);
 
 	writel(0, &eqos->dma_regs->ch0_txdesc_list_haddress);
 	writel((ulong)eqos->tx_descs, &eqos->dma_regs->ch0_txdesc_list_address);
-- 
2.25.1