[PATCH V2 06/14] ARM: dts: stm32: Add QSPI NOR on AV96

[Patrice CHOTARD]

Hi Marek

On 3/31/20 2:48 AM, Marek Vasut wrote:
> The DH Electronics DHCOR SOM has QSPI NOR on the SoM itself, add it
> into the DT.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>


Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks

> ---
> V2: Drop the explicit flash type in DT node, use spi-flash
> ---
>  arch/arm/dts/stm32mp157a-avenger96.dts | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
> index 3fca1ed56d..512ef5f7bb 100644
> --- a/arch/arm/dts/stm32mp157a-avenger96.dts
> +++ b/arch/arm/dts/stm32mp157a-avenger96.dts
> @@ -20,6 +20,7 @@
>  		mmc0 = &sdmmc1;
>  		serial0 = &uart4;
>  		serial1 = &uart7;
> +		spi0 = &qspi;
>  	};
>  
>  	chosen {
> @@ -300,6 +301,25 @@
>  	vdd_3v3_usbfs-supply = <&vdd_usb>;
>  };
>  
> +&qspi {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
> +	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
> +	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	flash0: spi-flash at 0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-rx-bus-width = <4>;
> +		spi-max-frequency = <108000000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> +
>  &rng1 {
>  	status = "okay";
>  };