[PATCH v5 06/14] sifive: fu540: add ddr driver
Pragnesh Patel
pragnesh.patel at sifive.com
Tue Mar 17 14:00:39 CET 2020
Hi Bin,
>-----Original Message-----
>From: Bin Meng <bmeng.cn at gmail.com>
>Sent: 13 March 2020 13:18
>To: Pragnesh Patel <pragnesh.patel at sifive.com>
>Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Atish Patra
><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul
>Walmsley <paul.walmsley at sifive.com>; Jagan Teki
><jagan at amarulasolutions.com>; Troy Benjegerdes
><troy.benjegerdes at sifive.com>; Anup Patel <anup.patel at wdc.com>; Sagar
>Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>; Kever
>Yang <kever.yang at rock-chips.com>; Giulio Benetti
><giulio.benetti at benettiengineering.com>; Lokesh Vutla
><lokeshvutla at ti.com>; Kevin Scholz <k-scholz at ti.com>; YouMin Chen
><cym at rock-chips.com>
>Subject: Re: [PATCH v5 06/14] sifive: fu540: add ddr driver
>
>On Wed, Mar 11, 2020 at 3:04 PM Pragnesh Patel
><pragnesh.patel at sifive.com> wrote:
>>
>> Add driver for fu540 to support ddr initialization in SPL.
>> This driver is based on FSBL
>> (https://github.com/sifive/freedom-u540-c000-bootloader.git)
>>
>> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
>> ---
>> drivers/ram/Kconfig | 7 +
>> drivers/ram/Makefile | 2 +
>> drivers/ram/sifive/Kconfig | 8 +
>> drivers/ram/sifive/Makefile | 6 +
>> drivers/ram/sifive/sdram_fu540.c | 295
>> +++++++++++++++++++++++++++++++ drivers/ram/sifive/sdram_fu540.h |
>> 94 ++++++++++
>> 6 files changed, 412 insertions(+)
>> create mode 100644 drivers/ram/sifive/Kconfig create mode 100644
>> drivers/ram/sifive/Makefile create mode 100644
>> drivers/ram/sifive/sdram_fu540.c create mode 100644
>> drivers/ram/sifive/sdram_fu540.h
>>
>> diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index
>> 56fea7c94c..c60c63204c 100644
>> --- a/drivers/ram/Kconfig
>> +++ b/drivers/ram/Kconfig
>> @@ -73,5 +73,12 @@ config IMXRT_SDRAM
>> to support external memories like sdram, psram & nand.
>> This driver is for the sdram memory interface with the SEMC.
>>
>> +config SIFIVE_DDR
>> + bool "Enable SiFive DDR support"
>> + depends on RAM
>> + help
>> + Enable support for the internal DDR Memory Controller of SiFive SoCs.
>> +
>> source "drivers/ram/rockchip/Kconfig"
>> source "drivers/ram/stm32mp1/Kconfig"
>> +source "drivers/ram/sifive/Kconfig"
>> diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index
>> 5c897410c6..12bf61510b 100644
>> --- a/drivers/ram/Makefile
>> +++ b/drivers/ram/Makefile
>> @@ -17,3 +17,5 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
>> obj-$(CONFIG_K3_J721E_DDRSS) += k3-j721e/
>>
>> obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o
>> +
>> +obj-$(CONFIG_SIFIVE_DDR) += sifive/
>> diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig
>> new file mode 100644 index 0000000000..b754700db8
>> --- /dev/null
>> +++ b/drivers/ram/sifive/Kconfig
>> @@ -0,0 +1,8 @@
>> +config SIFIVE_FU540_DDR
>> + bool "SiFive FU540 DDR driver"
>> + depends on DM && OF_CONTROL
>> + select RAM
>
>Do we need this driver for U-Boot proper?
SPL_RAM is depend on RAM that's why select RAM here.
>
>> + select SPL_RAM if SPL
>> + select SIFIVE_DDR
>> + help
>> + This enables DDR support for the platforms based on SiFive FU540
>SoC.
>> diff --git a/drivers/ram/sifive/Makefile b/drivers/ram/sifive/Makefile
>> new file mode 100644 index 0000000000..0187805199
>> --- /dev/null
>> +++ b/drivers/ram/sifive/Makefile
>> @@ -0,0 +1,6 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (c) 2020 SiFive, Inc
>> +#
>> +
>> +obj-$(CONFIG_SIFIVE_FU540_DDR) += sdram_fu540.o
>> diff --git a/drivers/ram/sifive/sdram_fu540.c
>> b/drivers/ram/sifive/sdram_fu540.c
>> new file mode 100644
>> index 0000000000..18926dbe15
>> --- /dev/null
>> +++ b/drivers/ram/sifive/sdram_fu540.c
>> @@ -0,0 +1,295 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * (C) Copyright 2020 SiFive, Inc.
>> + *
>> + * Authors:
>> + * Pragnesh Patel <pragnesh.patel at sifive.com>
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <init.h>
>> +#include <ram.h>
>> +#include <regmap.h>
>> +#include <syscon.h>
>> +#include <asm/io.h>
>> +#include "sdram_fu540.h"
>> +
>> +/* n: Unit bytes */
>> +void sdram_copy_to_reg(volatile u32 *dest, volatile u32 *src, u32 n)
>
>This should be static, also use "int n"?
I agree with static but "n" should be u32 because it tells how many bytes you want to copy.
>
>> +{
>> + int i;
>> +
>> + for (i = 0; i < n / sizeof(u32); i++) {
>> + writel(*src, dest);
>> + src++;
>> + dest++;
>> + }
>> +}
>> +
>> +static void ddr_setuprangeprotection(volatile u32 *ctl, u64 end_addr)
>
>__maybe_unused ? Otherwise use #ifdef #endif ?
Will use it under " #if defined(CONFIG_SPL_BUILD)" and update in v6.
>
>
>> +{
>> + writel(0x0, DENALI_CTL_209 + ctl);
>> + u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1;
>
>nits: move the variable declaration
Will do.
>
>> +
>> + writel(end_addr_16kblocks, DENALI_CTL_210 + ctl);
>> + writel(0x0, DENALI_CTL_212 + ctl);
>> + writel(0x0, DENALI_CTL_214 + ctl);
>> + writel(0x0, DENALI_CTL_216 + ctl);
>> + setbits_le32(DENALI_CTL_224 + ctl,
>> + 0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET);
>> + writel(0xFFFFFFFF, DENALI_CTL_225 + ctl);
>> + setbits_le32(DENALI_CTL_208 + ctl, 0x1 <<
>AXI0_ADDRESS_RANGE_ENABLE);
>> + setbits_le32(DENALI_CTL_208 + ctl,
>> + 0x1 << PORT_ADDR_PROTECTION_EN_OFFSET); }
>> +
>> +static void ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl,
>> +u64 ddr_end)
>
>__maybe_unused ?
Will use it under " #if defined(CONFIG_SPL_BUILD)" and update in v6.
>
>> +{
>> + setbits_le32(DENALI_CTL_0 + ctl, 0x1);
>> + while ((readl(DENALI_CTL_132 + ctl) & (1 <<
>MC_INIT_COMPLETE_OFFSET))
>> + == 0) {
>> + }
>> +
>
>Use
>
>do {
> val = readl(DENALI_CTL_132 + ctl) & (1 << MC_INIT_COMPLETE_OFFSET); }
>while (val == 0)
Thanks for the suggestion, will update in v6.
>
>?
>
>
>> + // Disable the BusBlocker in front of the controller AXI slave
>> + ports
>
>nits: use /* */
Will do.
>
>> + volatile u64 *filterreg = (volatile u64
>> + *)physical_filter_ctrl;
>
>Please move the variable declaration to the beginning of this function
Will do.
>
>> +
>> + filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2); }
>> +
>> +static u64 ddr_phy_fixup(volatile u32 *ddrphyreg)
>
>__maybe_unused ?
Will use it under " #if defined(CONFIG_SPL_BUILD)" and update in v6.
>
>> +{
>> + // return bitmask of failed lanes
>
>nits: use /* */
Will do.
>
>> +
>> + u64 fails = 0;
>> + u32 slicebase = 0;
>> + u32 dq = 0;
>> +
>> + // check errata condition
>
>nits: use /* */
Will do.
>
>> + for (u32 slice = 0; slice < 8; slice++) {
>> + u32 regbase = slicebase + 34;
>> +
>> + for (u32 reg = 0; reg < 4; reg++) {
>> + u32 updownreg = readl(regbase + reg +
>> + ddrphyreg);
>> +
>> + for (u32 bit = 0; bit < 2; bit++) {
>> + u32 phy_rx_cal_dqn_0_offset;
>> +
>> + if (bit == 0) {
>> + phy_rx_cal_dqn_0_offset =
>> + PHY_RX_CAL_DQ0_0_OFFSET;
>> + } else {
>> + phy_rx_cal_dqn_0_offset =
>> + PHY_RX_CAL_DQ1_0_OFFSET;
>> + }
>> +
>> + u32 down = (updownreg >>
>> + phy_rx_cal_dqn_0_offset) & 0x3F;
>> + u32 up = (updownreg >>
>> + (phy_rx_cal_dqn_0_offset + 6)) &
>> + 0x3F;
>> +
>> + u8 failc0 = ((down == 0) && (up == 0x3F));
>> + u8 failc1 = ((up == 0) && (down ==
>> + 0x3F));
>> +
>> + // print error message on failure
>
>nits: use /* */
Will do.
>
>> + if (failc0 || failc1) {
>> + if (fails == 0)
>> + printf("DDR error in
>> + fixing up\n");
>> +
>> + fails |= (1 << dq);
>> +
>> + char slicelsc = '0';
>> + char slicemsc = '0';
>> +
>> + slicelsc += (dq % 10);
>> + slicemsc += (dq / 10);
>> + printf("S ");
>> + printf("%c", slicemsc);
>> + printf("%c", slicelsc);
>> +
>> + if (failc0)
>> + printf("U");
>> + else
>> + printf("D");
>> +
>> + printf("\n");
>> + }
>> + dq++;
>> + }
>> + }
>> + slicebase += 128;
>> + }
>> + return(0);
>> +}
>> +
>> +static u32 ddr_getdramclass(volatile u32 *ctl)
>
>__maybe_unused ?
Sure, will use __ maybe_unused here.
>
>> +{
>> + u32 reg = readl(DENALI_CTL_0 + ctl);
>> +
>> + return ((reg >> DRAM_CLASS_OFFSET) & 0xF); }
>> +
>> +static __maybe_unused int fu540_ddr_setup(struct udevice *dev) {
>> + struct ddr_info *priv = dev_get_priv(dev);
>> + struct sifive_dmc_plat *plat = dev_get_platdata(dev);
>> +
>> + int ret, i;
>> + u32 physet;
>> +
>> + volatile u32 *denali_ctl = &priv->ctl->denali_ctl[0];
>> + volatile u32 *denali_phy = &priv->phy->denali_phy[0];
>> +
>> + ret = dev_read_u32_array(dev, "sifive,sdram-params",
>> + (u32 *)&plat->sdram_params,
>> + sizeof(plat->sdram_params) / sizeof(u32));
>> + if (ret) {
>> + printf("%s: Cannot read sifive,sdram-params %d\n",
>> + __func__, ret);
>> + return ret;
>> + }
>> +
>> + struct fu540_sdram_params *params = &plat->sdram_params;
>
>Please move the variable declaration to the beginning of this function.
Will do.
>
>> +
>> + sdram_copy_to_reg(&priv->ctl->denali_ctl[0],
>> + ¶ms->pctl_regs.denali_ctl[0],
>> + sizeof(struct fu540_ddrctl));
>> +
>> + /* phy reset */
>> + for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) {
>> + physet = params->phy_regs.denali_phy[i];
>> + priv->phy->denali_phy[i] = physet;
>> + }
>> +
>> + for (i = 0; i < DENALI_PHY_1152; i++) {
>> + physet = params->phy_regs.denali_phy[i];
>> + priv->phy->denali_phy[i] = physet;
>> + }
>> +
>> + /* Disable read interleave DENALI_CTL_120 */
>> + setbits_le32(DENALI_CTL_120 + denali_ctl,
>> + 1 << DISABLE_RD_INTERLEAVE_OFFSET);
>> +
>> + /* Disable optimal read/modify/write logic DENALI_CTL_21 */
>> + clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 <<
>> + OPTIMAL_RMODW_EN_OFFSET);
>> +
>> + /* Enable write Leveling DENALI_CTL_170 */
>> + setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET)
>> + | (1 << DFI_PHY_WRLELV_MODE_OFFSET));
>> +
>> + /* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */
>> + setbits_le32(DENALI_CTL_181 + denali_ctl,
>> + 1 << DFI_PHY_RDLVL_MODE_OFFSET);
>> + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 <<
>> + RDLVL_EN_OFFSET);
>> +
>> + /* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */
>> + setbits_le32(DENALI_CTL_260 + denali_ctl, 1 <<
>RDLVL_GATE_EN_OFFSET);
>> + setbits_le32(DENALI_CTL_182 + denali_ctl,
>> + 1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET);
>> +
>> + if (ddr_getdramclass(denali_ctl) == DRAM_CLASS_DDR4) {
>> + /* Enable vref training DENALI_CTL_184 */
>> + setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET);
>> + }
>> +
>> + /* Mask off leveling completion interrupt DENALI_CTL_136 */
>> + setbits_le32(DENALI_CTL_136 + denali_ctl,
>> + 1 << LEVELING_OPERATION_COMPLETED_OFFSET);
>> +
>> + /* Mask off MC init complete interrupt DENALI_CTL_136 */
>> + setbits_le32(DENALI_CTL_136 + denali_ctl, 1 <<
>> + MC_INIT_COMPLETE_OFFSET);
>> +
>> + /* Mask off out of range interrupts DENALI_CTL_136 */
>> + setbits_le32(DENALI_CTL_136 + denali_ctl, (1 <<
>OUT_OF_RANGE_OFFSET)
>> + | (1 << MULTIPLE_OUT_OF_RANGE_OFFSET));
>> +
>> + /* set up range protection */
>> + ddr_setuprangeprotection(denali_ctl, DDR_MEM_SIZE);
>> +
>> + /* Mask off port command error interrupt DENALI_CTL_136 */
>> + setbits_le32(DENALI_CTL_136 + denali_ctl,
>> + 1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET);
>> +
>> + const u64 ddr_size = DDR_MEM_SIZE;
>> + const u64 ddr_end = PAYLOAD_DEST + ddr_size;
>> +
>
>Please move the variable declaration to the beginning of this function.
Will do.
>
>> + ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end);
>> +
>> + ddr_phy_fixup(denali_phy);
>> +
>> + /* check size */
>> + priv->info.size = get_ram_size((long *)priv->info.base,
>> + DDR_MEM_SIZE);
>> +
>> + printf("priv->info.size = %lx\n", priv->info.size);
>> + debug("%s : %lx\n", __func__, priv->info.size);
>> +
>> + /* check memory access for all memory */
>> +
>> + if (priv->info.size != DDR_MEM_SIZE) {
>> + printf("DDR invalid size : 0x%lx, expected 0x%lx\n",
>> + priv->info.size, DDR_MEM_SIZE);
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int fu540_ddr_probe(struct udevice *dev) {
>> + struct ddr_info *priv = dev_get_priv(dev);
>> +
>> +#if defined(CONFIG_SPL_BUILD)
>> + struct regmap *map;
>> + int ret;
>> +
>> + debug("FU540 DDR probe\n");
>> + priv->dev = dev;
>> +
>> + ret = regmap_init_mem(dev_ofnode(dev), &map);
>> + if (ret)
>> + return ret;
>> +
>> + priv->ctl = regmap_get_range(map, 0);
>> + priv->phy = regmap_get_range(map, 1);
>> + priv->physical_filter_ctrl = regmap_get_range(map, 2);
>> +
>> + priv->info.base = CONFIG_SYS_SDRAM_BASE;
>> +
>> + priv->info.size = 0;
>> + return fu540_ddr_setup(dev);
>> +#else
>> + priv->info.base = CONFIG_SYS_SDRAM_BASE;
>> + priv->info.size = DDR_MEM_SIZE; #endif
>> + return 0;
>> +}
>> +
>> +static int fu540_ddr_get_info(struct udevice *dev, struct ram_info
>> +*info) {
>> + struct ddr_info *priv = dev_get_priv(dev);
>> +
>> + *info = priv->info;
>> +
>> + return 0;
>> +}
>> +
>> +static struct ram_ops fu540_ddr_ops = {
>> + .get_info = fu540_ddr_get_info, };
>> +
>> +static const struct udevice_id fu540_ddr_ids[] = {
>> + { .compatible = "sifive,fu540-ddr" },
>
>"sifive,fu540-c000-ddr" ?
Will update in v6.
>
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(fu540_ddr) = {
>> + .name = "fu540_ddr",
>> + .id = UCLASS_RAM,
>> + .of_match = fu540_ddr_ids,
>> + .ops = &fu540_ddr_ops,
>> + .probe = fu540_ddr_probe,
>> + .priv_auto_alloc_size = sizeof(struct ddr_info),
>> + .platdata_auto_alloc_size = sizeof(struct sifive_dmc_plat), };
>> diff --git a/drivers/ram/sifive/sdram_fu540.h
>> b/drivers/ram/sifive/sdram_fu540.h
>> new file mode 100644
>> index 0000000000..09693a038e
>> --- /dev/null
>> +++ b/drivers/ram/sifive/sdram_fu540.h
>> @@ -0,0 +1,94 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
>> +/*
>> + * Copyright (C) 2020, SiFive, Inc
>> + *
>> + * Authors:
>> + * Pragnesh Patel <pragnesh.patel at sifive.com>
>> + */
>> +
>> +#define DENALI_CTL_0 0
>> +#define DENALI_CTL_21 21
>> +#define DENALI_CTL_120 120
>> +#define DENALI_CTL_132 132
>> +#define DENALI_CTL_136 136
>> +#define DENALI_CTL_170 170
>> +#define DENALI_CTL_181 181
>> +#define DENALI_CTL_182 182
>> +#define DENALI_CTL_184 184
>> +#define DENALI_CTL_208 208
>> +#define DENALI_CTL_209 209
>> +#define DENALI_CTL_210 210
>> +#define DENALI_CTL_212 212
>> +#define DENALI_CTL_214 214
>> +#define DENALI_CTL_216 216
>> +#define DENALI_CTL_224 224
>> +#define DENALI_CTL_225 225
>> +#define DENALI_CTL_260 260
>> +
>> +#define DENALI_PHY_1152 1152
>> +#define DENALI_PHY_1214 1214
>> +
>> +#define PAYLOAD_DEST 0x80000000
>> +#define DDR_MEM_SIZE (8UL * 1024UL * 1024UL * 1024UL)
>> +
>> +#define DRAM_CLASS_OFFSET 8
>> +#define DRAM_CLASS_DDR4 0xA
>> +#define OPTIMAL_RMODW_EN_OFFSET 0
>> +#define DISABLE_RD_INTERLEAVE_OFFSET 16
>> +#define OUT_OF_RANGE_OFFSET 1
>> +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2
>> +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7
>> +#define MC_INIT_COMPLETE_OFFSET 8
>> +#define LEVELING_OPERATION_COMPLETED_OFFSET 22
>> +#define DFI_PHY_WRLELV_MODE_OFFSET 24
>> +#define DFI_PHY_RDLVL_MODE_OFFSET 24
>> +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0
>> +#define VREF_EN_OFFSET 24
>> +#define PORT_ADDR_PROTECTION_EN_OFFSET 0
>> +#define AXI0_ADDRESS_RANGE_ENABLE 8
>> +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24
>> +#define RDLVL_EN_OFFSET 16
>> +#define RDLVL_GATE_EN_OFFSET 24
>> +#define WRLVL_EN_OFFSET 0
>> +
>> +#define PHY_RX_CAL_DQ0_0_OFFSET 0
>> +#define PHY_RX_CAL_DQ1_0_OFFSET 16
>> +
>> +struct fu540_ddrctl {
>> + volatile u32 denali_ctl[265];
>> +};
>> +
>> +struct fu540_ddrphy {
>> + volatile u32 denali_phy[1215]; };
>> +
>> +struct fu540_sdram_params {
>> + struct fu540_ddrctl pctl_regs;
>> + struct fu540_ddrphy phy_regs;
>> +};
>> +
>> +struct sifive_dmc_plat {
>> +#if CONFIG_IS_ENABLED(OF_PLATDATA)
>> + struct dtd_sifive_fu540_dmc dtplat;
>
>Do we use this for SPL?
Yes, will update in v6.
>
>> +#else
>> + struct fu540_sdram_params sdram_params; #endif };
>> +
>> +/**
>> + * struct ddr_info
>> + *
>> + * @dev : pointer for the device
>> + * @info : UCLASS RAM information
>> + * @ctl : DDR controleur base address
>
>typo: controller
Thanks, will update.
>
>> + * @phy : DDR PHY base address
>> + * @ctrl : DDR control base address
>> + * @physical_filter_ctrl : DDR physical filter control base address
>> + */
>> +struct ddr_info {
>> + struct udevice *dev;
>> + struct ram_info info;
>> + struct fu540_ddrctl *ctl;
>> + struct fu540_ddrphy *phy;
>> + u32 *physical_filter_ctrl;
>> +};
>> --
>
>Regards,
>Bin
More information about the U-Boot
mailing list