[PATCH V4] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2
Marek Vasut
marex at denx.de
Sat Mar 28 02:01:58 CET 2020
Add DT entries, Kconfig entries and board-specific entries to configure
FMC2 bus and make KS8851-16MLL on that bus accessible to U-Boot.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
---
V2: Configure FMC2 nCS4 for SRAM as well
V3: Adjust the register macros
V4: Use more macros
---
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 68 ++++++++++++++++++++++
board/dhelectronics/dh_stm32mp1/board.c | 52 +++++++++++++++++
configs/stm32mp15_dhcom_basic_defconfig | 1 +
3 files changed, 121 insertions(+)
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index 6c952a57ee..eba3588540 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -37,6 +37,12 @@
default-state = "on";
};
};
+
+ /* This is actually on FMC2, but we do not have bus driver for that */
+ ksz8851: ks8851mll at 64000000 {
+ compatible = "micrel,ks8851-mll";
+ reg = <0x64000000 0x20000>;
+ };
};
&i2c4 {
@@ -50,6 +56,68 @@
};
};
+&pinctrl {
+ /* These should bound to FMC2 bus driver, but we do not have one */
+ pinctrl-0 = <&fmc_pins_b>;
+ pinctrl-1 = <&fmc_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+
+ fmc_pins_b: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
+ <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
+ <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
+ <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
+ <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
+ <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
+ <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
+ <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
+ <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
+ <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ fmc_sleep_pins_b: fmc-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+ <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
+ <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
+ <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
+ <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
+ <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
+ };
+ };
+};
+
&pmic {
u-boot,dm-pre-reloc;
};
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index 7bcd713a86..a3458a2623 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -375,6 +375,56 @@ static void sysconf_init(void)
#endif
}
+static void board_init_fmc2(void)
+{
+#define STM32_FMC2_BCR1 0x0
+#define STM32_FMC2_BTR1 0x4
+#define STM32_FMC2_BWTR1 0x104
+#define STM32_FMC2_BCR(x) ((x) * 0x8 + STM32_FMC2_BCR1)
+#define STM32_FMC2_BCRx_FMCEN BIT(31)
+#define STM32_FMC2_BCRx_WREN BIT(12)
+#define STM32_FMC2_BCRx_RSVD BIT(7)
+#define STM32_FMC2_BCRx_FACCEN BIT(6)
+#define STM32_FMC2_BCRx_MWID(n) ((n) << 4)
+#define STM32_FMC2_BCRx_MTYP(n) ((n) << 2)
+#define STM32_FMC2_BCRx_MUXEN BIT(1)
+#define STM32_FMC2_BCRx_MBKEN BIT(0)
+#define STM32_FMC2_BTR(x) ((x) * 0x8 + STM32_FMC2_BTR1)
+#define STM32_FMC2_BTRx_DATAHLD(n) ((n) << 30)
+#define STM32_FMC2_BTRx_BUSTURN(n) ((n) << 16)
+#define STM32_FMC2_BTRx_DATAST(n) ((n) << 8)
+#define STM32_FMC2_BTRx_ADDHLD(n) ((n) << 4)
+#define STM32_FMC2_BTRx_ADDSET(n) ((n) << 0)
+
+#define RCC_MP_AHB6RSTCLRR 0x218
+#define RCC_MP_AHB6RSTCLRR_FMCRST BIT(12)
+#define RCC_MP_AHB6ENSETR 0x19c
+#define RCC_MP_AHB6ENSETR_FMCEN BIT(12)
+
+ const u32 bcr = STM32_FMC2_BCRx_WREN |STM32_FMC2_BCRx_RSVD |
+ STM32_FMC2_BCRx_FACCEN | STM32_FMC2_BCRx_MWID(1) |
+ STM32_FMC2_BCRx_MTYP(2) | STM32_FMC2_BCRx_MUXEN |
+ STM32_FMC2_BCRx_MBKEN;
+ const u32 btr = STM32_FMC2_BTRx_DATAHLD(3) |
+ STM32_FMC2_BTRx_BUSTURN(2) |
+ STM32_FMC2_BTRx_DATAST(0x22) |
+ STM32_FMC2_BTRx_ADDHLD(2) |
+ STM32_FMC2_BTRx_ADDSET(2);
+
+ /* Set up FMC2 bus for KS8851-16MLL and X11 SRAM */
+ writel(RCC_MP_AHB6RSTCLRR_FMCRST, STM32_RCC_BASE + RCC_MP_AHB6RSTCLRR);
+ writel(RCC_MP_AHB6ENSETR_FMCEN, STM32_RCC_BASE + RCC_MP_AHB6ENSETR);
+
+ /* KS8851-16MLL -- Muxed mode */
+ writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(1));
+ writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(1));
+ /* AS7C34098 SRAM on X11 -- Muxed mode */
+ writel(bcr, STM32_FMC2_BASE + STM32_FMC2_BCR(3));
+ writel(btr, STM32_FMC2_BASE + STM32_FMC2_BTR(3));
+
+ setbits_le32(STM32_FMC2_BASE + STM32_FMC2_BCR1, STM32_FMC2_BCRx_FMCEN);
+}
+
/* board dependent setup after realloc */
int board_init(void)
{
@@ -398,6 +448,8 @@ int board_init(void)
sysconf_init();
+ board_init_fmc2();
+
if (CONFIG_IS_ENABLED(CONFIG_LED))
led_default_state();
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 921dea242a..683f15e7d5 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -93,6 +93,7 @@ CONFIG_SPI_FLASH_MTD=y
CONFIG_SPL_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_DWC_ETH_QOS=y
+CONFIG_KS8851_MLL=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
--
2.25.1
More information about the U-Boot
mailing list