[PATCH v5 08/11] arm: dts: actions: s700: add u-boot specific dtsi file

[Andre Przywara]

On Wed, 11 Mar 2020 23:34:18 +0530
Amit Singh Tomar <amittomer25 at gmail.com> wrote:

> Devices like uart and clk are needed to be enabled before relocation.
> this patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
> 
> Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> Changes since v4:
> 	* Moved it to 08/11 to 06/11.
> Changes since v3:
>         * Replaced dtsi with dts in subject line along with arm:dts:
>           to the prefix.
> Changes since v2:
>         * Added License.
> Changes since v1:
>         * This is newly added file that was *not* present in v1 and
>           contains u-boot specific changes.     
> ---
>  arch/arm/dts/s700-u-boot.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 arch/arm/dts/s700-u-boot.dtsi
> 
> diff --git a/arch/arm/dts/s700-u-boot.dtsi b/arch/arm/dts/s700-u-boot.dtsi
> new file mode 100644
> index 0000000..a527ccc
> --- /dev/null
> +++ b/arch/arm/dts/s700-u-boot.dtsi
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2020 Amit Singh Tomar <amittomer25 at gmail.com>
> + */
> +
> +/{
> +	soc {
> +		u-boot,dm-pre-reloc;
> +	};
> +};
> +
> +&uart3 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&cmu {
> +	u-boot,dm-pre-reloc;
> +};