[PATCH v5 19/33] spi: dw: Add device tree properties for fields in CTRL1
Rick Chen
rickchen36 at gmail.com
Wed Mar 4 07:15:52 CET 2020
Hi Sean
> Some devices have different layouts for the fields in CTRL1 (e.g. the
Still not fix this typo in commit message
CTRL1 -> CTRL0
Thanks,
Rick
> Kendryte K210). Allow this layout to be configurable from the device tree.
> The documentation has been taken from Linux.
>
> Signed-off-by: Sean Anderson <seanga2 at gmail.com>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v4:
> - New
>
> .../spi/snps,dw-apb-ssi.txt | 43 +++++++++++++++++++
> drivers/spi/designware_spi.c | 40 ++++++++++-------
> 2 files changed, 68 insertions(+), 15 deletions(-)
> create mode 100644 doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt
>
> diff --git a/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt b/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt
> new file mode 100644
> index 0000000000..4b6152f6b7
> --- /dev/null
> +++ b/doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt
> @@ -0,0 +1,43 @@
> +Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
> +
> +Required properties:
> +- compatible : "snps,dw-apb-ssi"
> +- reg : The register base for the controller. For "mscc,<soc>-spi", a second
> + register set is required (named ICPU_CFG:SPI_MST)
> +- #address-cells : <1>, as required by generic SPI binding.
> +- #size-cells : <0>, also as required by generic SPI binding.
> +- clocks : phandles for the clocks, see the description of clock-names below.
> + The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock
> + is optional. If a single clock is specified but no clock-name, it is the
> + "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.
> +
> +Optional properties:
> +- clock-names : Contains the names of the clocks:
> + "ssi_clk", for the core clock used to generate the external SPI clock.
> + "pclk", the interface clock, required for register access.
> +- cs-gpios : Specifies the gpio pins to be used for chipselects.
> +- num-cs : The number of chipselects. If omitted, this will default to 4.
> +- reg-io-width : The I/O register width (in bytes) implemented by this
> + device. Supported values are 2 or 4 (the default).
> +- snps,dfs-offset The offset in bits of the DFS field in CTRL0, defaulting to 0
> +- snps,frf-offset The offset in bits of the FRF field in CTRL0, defaulting to 4
> +- snps,tmod-offset The offset in bits of the tmode field in CTRL0, defaulting
> + to 6
> +- snps,mode-offset The offset in bits of the work mode field in CTRL0,
> + defaulting to 8
> +
> +Child nodes as per the generic SPI binding.
> +
> +Example:
> +
> + spi at fff00000 {
> + compatible = "snps,dw-apb-ssi";
> + reg = <0xfff00000 0x1000>;
> + interrupts = <0 154 4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&spi_m_clk>;
> + num-cs = <2>;
> + cs-gpios = <&gpio0 13 0>,
> + <&gpio0 14 0>;
> + };
> diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
> index 2dc16736a3..6e1c289297 100644
> --- a/drivers/spi/designware_spi.c
> +++ b/drivers/spi/designware_spi.c
> @@ -3,6 +3,7 @@
> * Designware master SPI core controller driver
> *
> * Copyright (C) 2014 Stefan Roese <sr at denx.de>
> + * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
> *
> * Very loosely based on the Linux driver:
> * drivers/spi/spi-dw.c, which is:
> @@ -51,20 +52,14 @@
> #define DW_SPI_DR 0x60
>
> /* Bit fields in CTRLR0 */
> -#define SPI_DFS_OFFSET 0
> -
> -#define SPI_FRF_OFFSET 4
> #define SPI_FRF_SPI 0x0
> #define SPI_FRF_SSP 0x1
> #define SPI_FRF_MICROWIRE 0x2
> #define SPI_FRF_RESV 0x3
>
> -#define SPI_MODE_OFFSET 6
> -#define SPI_SCPH_OFFSET 6
> -#define SPI_SCOL_OFFSET 7
> +#define SPI_MODE_SCPH 0x1
> +#define SPI_MODE_SCOL 0x2
>
> -#define SPI_TMOD_OFFSET 8
> -#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
> #define SPI_TMOD_TR 0x0 /* xmit & recv */
> #define SPI_TMOD_TO 0x1 /* xmit only */
> #define SPI_TMOD_RO 0x2 /* recv only */
> @@ -89,6 +84,12 @@
> struct dw_spi_platdata {
> s32 frequency; /* Default clock frequency, -1 for none */
> void __iomem *regs;
> +
> + /* Offsets in CTRL0 */
> + u8 dfs_off;
> + u8 frf_off;
> + u8 tmod_off;
> + u8 mode_off;
> };
>
> struct dw_spi_priv {
> @@ -115,6 +116,15 @@ struct dw_spi_priv {
> struct reset_ctl_bulk resets;
> };
>
> +static inline u32 GEN_CTRL0(struct dw_spi_priv *priv,
> + struct dw_spi_platdata *plat)
> +{
> + return ((priv->bits_per_word - 1) << plat->dfs_off |
> + (priv->type << plat->frf_off) |
> + (priv->mode << plat->mode_off) |
> + (priv->tmode << plat->tmod_off));
> +}
> +
> static inline u32 dw_read(struct dw_spi_priv *priv, u32 offset)
> {
> return __raw_readl(priv->regs + offset);
> @@ -160,6 +170,10 @@ static int dw_spi_ofdata_to_platdata(struct udevice *bus)
> /* Use 500KHz as a suitable default */
> plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
> 500000);
> + plat->dfs_off = dev_read_u32_default(bus, "snps,dfs-offset", 0);
> + plat->frf_off = dev_read_u32_default(bus, "snps,frf-offset", 4);
> + plat->mode_off = dev_read_u32_default(bus, "snps,mode-offset", 6);
> + plat->tmod_off = dev_read_u32_default(bus, "snps,tmod-offset", 8);
> debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
> plat->frequency);
>
> @@ -388,6 +402,7 @@ static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
> const void *dout, void *din, unsigned long flags)
> {
> struct udevice *bus = dev->parent;
> + struct dw_spi_platdata *plat = dev_get_platdata(bus);
> struct dw_spi_priv *priv = dev_get_priv(bus);
> const u8 *tx = dout;
> u8 *rx = din;
> @@ -406,10 +421,6 @@ static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
> if (flags & SPI_XFER_BEGIN)
> external_cs_manage(dev, false);
>
> - cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) |
> - (priv->mode << SPI_MODE_OFFSET) |
> - (priv->tmode << SPI_TMOD_OFFSET);
> -
> if (rx && tx)
> priv->tmode = SPI_TMOD_TR;
> else if (rx)
> @@ -421,8 +432,7 @@ static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
> */
> priv->tmode = SPI_TMOD_TR;
>
> - cr0 &= ~SPI_TMOD_MASK;
> - cr0 |= (priv->tmode << SPI_TMOD_OFFSET);
> + cr0 = GEN_CTRL0(priv, plat);
>
> priv->len = bitlen >> 3;
> debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);
> @@ -476,7 +486,7 @@ static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
>
> static int dw_spi_set_speed(struct udevice *bus, uint speed)
> {
> - struct dw_spi_platdata *plat = bus->platdata;
> + struct dw_spi_platdata *plat = dev_get_platdata(bus);
> struct dw_spi_priv *priv = dev_get_priv(bus);
> u16 clk_div;
>
> --
> 2.25.0
>
More information about the U-Boot
mailing list