[PATCH] ARM: dts: stm32: Define FMC2 base address

[Patrice CHOTARD]

Hi Marek

On 3/26/20 4:57 PM, Marek Vasut wrote:
> Define FMC2 base address, for use in board files, until there is an
> actual FMC2 bus driver.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> ---
>  arch/arm/mach-stm32mp/include/mach/stm32.h | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index f0636005e5..62d95d7f88 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -13,6 +13,7 @@
>  #define STM32_RCC_BASE			0x50000000
>  #define STM32_PWR_BASE			0x50001000
>  #define STM32_DBGMCU_BASE		0x50081000
> +#define STM32_FMC2_BASE			0x58002000
>  #define STM32_TZC_BASE			0x5C006000
>  #define STM32_ETZPC_BASE		0x5C007000
>  #define STM32_STGEN_BASE		0x5C008000

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks

Patrice