[PATCH 3/3] imx: imx8m: Don't use the addr parameter of reset_cpu

[Harald Seiler]

From: Claudius Heine <ch at denx.de>

imx8m has the only implementation of `reset_cpu` which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e84b ("imx8m: restrict reset_cpu")
Co-Authored-by: Harald Seiler <hws at denx.de>
Signed-off-by: Claudius Heine <ch at denx.de>
Signed-off-by: Harald Seiler <hws at denx.de>
---
 arch/arm/mach-imx/imx8m/soc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 7fcbd53f3020..2d3afc61a452 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -385,10 +385,7 @@ int ft_system_setup(void *blob, bd_t *bd)
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SYSRESET)
 void reset_cpu(ulong addr)
 {
-       struct watchdog_regs *wdog = (struct watchdog_regs *)addr;
-
-       if (!addr)
-	       wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+       struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
 
        /* Clear WDA to trigger WDOG_B immediately */
        writew((WCR_WDE | WCR_SRS), &wdog->wcr);
-- 
2.24.1